Truck Storage & Organization

In The Ditch Trash Can Mounts are made from aluminum and can be easily mounted to any carrier or vertical surface. These mounts are made from 1/8" aluminum and they come with pre-drilled mounting holes that will fit on their Pro Series Tool Boxes for easy installation. You can choose from a mount that will hold either a 4 gallon trash can or a 6 gallon trash can. The trash can and bungee cords are not included with these mounts. Shop for a

In The Ditch's Trash Can Mounts are made from aluminum and can be easily mounted to the deck of a wrecker or any flat surface. You can choose from either a 4 gallon trash can mount or a 6 gallon trash can mount. Both are made from 1/8" thick aluminum and are easy to install with pre-drilled mounting holes. These mounts do not include a trash can or the bungee cords. Shop for your new

These Rubber Clamps from Buyers Products will clamp to objects 1/2" to 2-1/2" in diameter. Clamps are made to easily adjust to different size objects. The rubber is made from heavy duty transportation grade rubber that will not be affected by the hot or cold climates. Each of these clamps will support approximately 22 lbs.

Zip's Gas & Garbage Can Holder Kit includes a built-in step. To be installed on the front end of an underbody toolbox. Gas Can and Garbage Can NOT included.

In The Ditch designed their XD "Extreme Duty" Trash Can Mounts to hold up to 60 lbs. of weight. Not only will these mounts hold up to 60 lbs. of weight, but they look good and will last for years. You can choose from either a 6 gallon can XD mount or 4 gallon can XD mount. These mounts are made from 1/8" thick aluminum and they have a bungee cord already installed. Both of these mounts can easily be mounted to any vertical surface such as tool boxes, truck frames, or garage walls. There is no trash can included with these mounts but we do offer those too. Shop for your new

This Broom and Shovel Rack is the perfect way to store your brooms and shovels. Mount this rack to the deck, wall, or roof for easy access. The angle of the mount can be adjusted to the angle that is most convenient for you. Come pre-drilled for bungee cords to make securing your brooms and shovels easy. The rack also comes with a bolt-on bracket that keeps your broom head or shovel head flat.

Get your truck organized with this Frame Fork Storage Rack. This frame fork storage rack will easily mount in most tool boxes. The 23" rack can hold 6 regular forks and the 30" can hold 4 regular forks and 2 spring lift adapters. It fits most side box compartments. In a matter of minutes you can bolt the mount in place and keep all your forks in one place. This rack is made from 1/8" thick aluminum that will last forever and doesn't need to be painted.

The Buyers Products Stainless Steel Shovel Holder for Trucks mounts to the side of your vehicle to store a shovel or other round handled tool during travel.

These powder-coated aluminum brackets feature flexible latches to secure your equipment. Brackets adjust to hold anything from 1" to 1-5/6" dia.

This Shackle Hanger Kit is from Miller Industries. This kit includes 5 shackle hangers.

The Hooklok bracket is a versatile and easy to use friction lock product providing secure mounting for a wide variety of tools and equipment. These brackets are Clamp-Action mounting brackets which use automatic clamp action force and friction to restrain tools. They can be used to mount handles and poles from 1" to 1-1/4" diameter.

In The Ditch Peg Board Mounted Aerosol Can Holders come in 3 different sizes: (1) Can (3) Can and (6) Can holders. Our spray can holders are a great way to not only store your aerosol cans, they work great to keep your aerosols organized and easy to access. Our peg board spray can storage racks are made from steel and are powder coated in a black finish. The hole spacing for mounting our aerosol storage racks are made so you can install them in peg board using our Quick Mount Peg Board Screw . Installing your spray can rack is simple, just line up the mounting holes with the peg board holes and install our peg board screws. It s that simple! No drilling, no measuring, no leveling and best of all you can reuse the peg board screw over and over with no damage to the peg board hole. If you want to install the aerosol holder on any flat surface, just the type of hardware for each mounting surface. You can mount with pegboard mounting screws, dry wall screws, metal screws or mount to wood with a wood screw, it s your choice. We designed these for use in our manufacturing facility and put a lot of thought into getting everything just right. Like most of the products we make, we designed them because no one seemed to build what we wanted that actually worked.

This 9" Rubber Strap from Miller Industries is used on the Wheel Lift and Tire Restraint Assembly of Century, Champion, and Holmes Car Carriers. See the features below for a full list of carriers and see the brochure tab for breakdowns.

Accommodates various diameter tools and equipment. The powder-coated aluminum brackets feature durable, flexible draw latches to hold the tools firmly in place. For use with 1 to 1.3" dia. tools.

This Aluminum Storage Rack from In The Ditch is perfect for organizing your truck, shop, garage, or trailer. They are ideal for holding shackles, or they make a great holder for brooms, shovels and rakes. This rack is lightweight and comes pre-drilled for easy installation. Each hook is 6-1/2? long and has an individual load rating of 30 lbs. Need something to hang on your new storage rack? Shop our selection of

This Dual Trash Can Mount from In The Ditch is an efficient way to mount two 4 gallon trash cans side by side. Shop our selection of

Tough ABS plastic construction. Holds standard 14.1-oz. propane canisters (3-1/4" base)Measures 8-3/4" x 4-1/4". Holder allows you to store your propane torch safely in the shop or on your service vehicle.

This Bungee Cord Holder is the easiest way to carry and store your bungees. Put 9?, 15? and 21? bungees on the holder and carry it in one hand. When you are done just hang the mount with bungees on the included mounting plate. Don?t forget to buy your bungee cords,

Keep your tool box organized with this Lug Wrench Bracket from In The Ditch. This pre-drilled mount easily bolts to the inside of your tunnel box and allows operators to reach lug wrenches quickly. This handy bracket holds 2 standard size lug wrenches. Shop our selection of

Keep all your chains and snatch blocks organized and easily accessible with the In The Ditch Snatchblock and HD Chain Holders. Available in 9", 12", and 15" lengths to meet your storage needs. Mount them up on your wall, ready to use and professionally displayed. These racks have a 250 lb load rating, just remember that it s up to you to mount them securely to a strong enough surface to handle the weight. Aluminum alloy construction and our Endurance Black Powder Coat Finish keeps your Snatch Block and Chain Mount looking sharp even after years of faithful service. Mounting to any surface in your garage or trailer is simple, just select the appropriate hardware for your mounting surface. We designed these for use in our manufacturing facility and put a lot of thought into getting everything just right. Like most of the products we make, we designed them because no one seemed to build what we wanted and actually worked.

Use these versatile Mini Rubber Fist Clamps from QuickFist to secure almost anything inside your truck, trailer or shop. Each clamp holds up to 25-lb. and adjusts to 5/8" to 1-3/8" dia. Attach clamps using your own #10 bolts, washers and nuts.

This Shackle Hanger Kit from Miller Industries will Bolt On where you need it. This kit includes 5 hangers that bolt up to a flat surface to hang your shackles on.

This Air Line and Wiring Bracket from In The Ditch connects to any tool box to provide a covered channel to run wires out of the tool box for lighting. An airline can also be run through the bracket to provide an easy to access airline connection.

This is an adjustable trash can and bucket mount from In the Ditch. It will adjust to hold any trash can or bucket from 3 gallons up to 10 gallons. Made from 1/8" thick aluminum, this mount has 5/16" mounting holes and comes with a 21" bungee cord. This will easily mount to any flat surface. Sold as 2 pieces to hold 1 can.

This 3-In-1 Hook Rack from In The Ditch has become very popular because with its modular design, the uses are limitless. Each hook has an inside depth of 2-3/4", making it just the right size for hard hats, extension cords, tape rolls, wire rolls, and so much more. Each 3-In-1 rack comes with 4 arms that can be installed in any of the 5 slots so you can choose where to put it. If you need a larger hook be sure to shop for the XL Modular Hook Rack, ITD-1249.

PAC Handlelok provides an adjustable positive locking method to secure axes, hammers, bars and many other tools and equipment. The STRETCHLOK strap allows instant release. The Handlelok is a adjustable mounting bracket that provides secure mounting for tools, handles, poles, and other equipment. Grip range from 1/8" to 1-3/4".

This Frame Fork Storage Rack, from In The Ditch, is 30" long and it will hold four regular forks and two spring lift adapters. This rack will fit in most side box compartments. In a matter of minutes you can bolt the mount in place and keep all your forks in one place. It was built from aluminum so it will hold up for years. If 30" is a little too long, don?t worry we also offer a

Brooms and shovels take up space. Whether it’s on your truck or in your shop, saving space is important which is why you should use the PAC Tool Hanger Kit to help out with that. Letting you hang the tools from your walls, you can save tons of space and create significantly less clutter.

Shop Towel Holder Bracket.

This Rack from In The Ditch holds aerosol cans, and has spots for your air tools. These slots can hold things like pliers, and all standard 1/4" air fittings. Like most In The Ditch products this rack comes with pre-drilled holes for easy mounting. This rack is perfect for organizing your truck or shop so be sure to get yours today!

This Aluminum Storage Rack from In The Ditch is perfect for organizing your truck, shop, garage, or trailer. They are ideal for holding shackles, or they make a great holder for brooms, shovels and rakes. This rack is lightweight and comes pre-drilled for easy installation. The hook is 6-1/2" long and has an individual load rating of 30 lbs.

This cord hanger is ideal for storing cords and cables in your trailer or tool boxes. The unique square end cap keeps items from slipping off and the heavy-duty welded aluminum construction supports cords and cables up to 100'L. Easily mounts in small areas of your tool box.

Designed to accommodate 1? to 1.3? diameter tools and equipment. The powder-coated cast aluminum bracket features durable, flexible draw latch to hold the tools firmly in place.

This easy to install shelf from In The Ditch will help you quickly organize your truck, garage or trailer. Shelf can be installed using screws in the pre-drilled holes or by using 3-M Doubled sided tape, the choice is yours. Shelf is 3? deep, 3? tall and 6? long. We also offer a

This XL Modular Hook Rack from In The Ditch is meant for hanging large items. It is very similar to the 3-In-1 Rack, ITD-1164, except that it is larger. The mounting plate is 20" long and 7" tall, and the arms are 7" inside, allowing enough room to hang most anything. Leave the rack as is and have 1 rack with 4 hooks, or take it apart and have 3 individual racks.

This is a Zip's Custom weld-on bracket that is used to store your electrical cords or shackles. This bracket has a variety of uses.

Federal DOT Laws require that everything on the deck or bed of a commercial carrier is to be secured while in transit. We set out to solve this simple problem and come up with our In The Ditch 4x4 Lumber Holder Kit. With our 4X4 Lumber Holder you will be D.O.T compliant, organized and will look good going down the road. Each kit includes two holders made from aluminum. These 4x4 Holders can be mounted anywhere and will work with any length of 4x4. If you are worried about theft you can also lock your 4x4 using a Pad-Lock.

Get your quart can and bottles organized today with our In The Ditch Quart Can and Bottle Storage Racks! Our Oil Can and bottle holders are a great way to not only securely store your oil and spray bottles, but also keep them organized and easy to access. Each bottle is held individually to prevent tipping/sliding/spilling and the separation makes for quick and easy removal and replacement. Sturdy steel construction and our Endurance Black Powder Coat Finish keeps your Oil/Spray Bottle Mount looking sharp even after years of faithful service. Mounting to any flat surface in your garage or trailer is simple, just select appropriate hardware for your mounting surface: pegboard screws, wood screws, self-tapping metal screws, or drywall screws. We designed these for use in our manufacturing facility and put a lot of thought into getting everything just right. Like most of the products we make, we designed them because no one seemed to build what we wanted that actually worked.

Phoenix Multi-purpose Chrome Mounting Clip. This Mounting Clip is Used Inside the Top Mount Storage Trays (SUSB**ST), Which is Used in Toolboxes.

This 11" Shelf from In The Ditch is great for your home, shop, or garage. It is perfect for shop books, cans, or just about anything you can fit because it is 11" deep and 18" wide. The shelf installs with the gussets up, which creates a shelf with a lip, or turn it over with the gussets down to create a smooth top shelf. The pre-drilled holes are 16" apart so they can be screwed to a stud with ease.

This Deck Mounted 2 Gallon Container holder is designed to work with most 2 Gallon containers. This Mount is made from Aluminum, includes a 21 Bungee Cord and can be mounted to any flat surface. (Note) If You intend only transporting Fuels, please check your local laws regard transporting Flammable Liquids

Keep all your tie downs and chains organized and easily accessible with the In The Ditch Tie Down Strap Hangers. Available in 9", 12", and 15" lengths to meet your storage needs. Mount them up on your wall, ready to use and professionally displayed. These racks have a 150 lb load rating, just remember that it s up to you to mount them securely to a strong enough surface to handle the weight. Aluminum alloy construction and our endurance black powder coat finish keeps your tie down mount looking sharp even after years of faithful service. Mounting to any flat surface in your garage or trailer is simple, just select appropriate hardware for your mounting surface: pegboard screws, wood screws, self-tapping metal screws, or drywall screws. We designed these for use in our manufacturing facility and put a lot of thought into getting everything just right. Like most of the products we make, we designed them because no one seemed to build what we wanted that actually worked.

The Tool Hanger Kit is designed to be a simple hanger solution for shovels, brooms and many other T- shaped equipment. Tool Hangers work best with Handlelok brackets included in the Tool Hanger Kit part number

Universal Tire Lock installs in seconds, locking tires in place and preventing wheels from turning. The strong steel frame features a small and large side that fits most tire sizes up to 20" dia. Coated arms prevent scratches on wheels and rims.

PAC Tool Mounts Jumbo Lok is a large positive locking bracket with FOUR strap pivot positions providing an extensive grip range for a wide variety of tools and equipment.

Quickly mounts to your truck or tool box using magnets. Accommodates a 50 or 100 pack box of gloves. Screw slots for permanent mounting. Powder-coated steel construction.

The Universal Hanger is designed for hanging various items such as cords, ropes, chains and tools. Universal Hangers can be used in pairs to mount sledgehammers, picks, etc. Made of rugged polypropylene for strength and corrosion-resistance. Great for chains, cables, dropcords.

This Paper Towel Rack from In The Ditch is perfect for your garage, shop, or bathroom. It comes with a double rack that can hold two rolls of traditional paper towels, or work towels.

This Long Arm rubber clamp from Quick Fist holds tools and equipment from 1/2" to 4-1/2" in diameter. The perforated strap locks back on itself with rubber knobs, making it perfect for holding cords, hoses, long-handled tools and so much more.

Use these versatile Super Quick Rubber Fist Clamps from QuickFist to secure almost anything inside your truck, trailer or shop.

This is a 10 gal. trash can bracket mount from Austin Hardware.

This 6" Shelf from In The Ditch is great for your home, shop, or garage. It is perfect for smaller items because it is 6" deep and 18" wide. The shelf installs with the gussets up, which creates a shelf with a lip, or turn it over with the gussets down to create a smooth top shelf. The pre-drilled holes are 16" apart so they can be screwed to a stud with ease.

Welding Glove Holder Bracket.

Work Glove Holder Bracket.

PAC Tool Mounts Toolok bracket is a versatile and easy to use product providing secure mounting for a wide variety of tools and equipment.

This headset holder is a great way to not only securely store your ear muffs and welding helmets but also keep them organized and easy to access. These are also perfect to hang a variety of small cords, hats, and coats to keep them at the ready in your shop. Aluminum alloy construction and our Endurance Black Powder Coat Finish keeps your Ear Muff Mount looking sharp even after years of faithful service. Mounting to any surface in your garage or trailer is simple, just select the appropriate hardware for your mounting surface.

PAC Tool Mounts Mini Lok Bracket is a versatile and easy to use friction lock product providing secure mounting for small tools and equipment. Perfect for flashlights, rods, cords, and small hand tools.

PAC Tool Mounts Stow-N-Loks combine a positive locking bracket and friction locking bracket action with the security of a positive locking bracket strap. The flexible Y-shaped positive locking brackets are designed to provide a secure grip-like tool mount and equipment mount for poles, nozzles and a wide variety of other tools and equipment. These positive locking brackets and friction locking brackets can be used with or without the strap. The strap is easily adjusted for various workholding conditions and sizes.