Dollies

Note: Special Handling Fees Apply

The life of a tow truck operator is a tough and dangerous one. Physically demanding, close to high-speed traffic, and never entirely sure what could go wrong. Every tow truck operator deserves as many conveniences as possible. This is why we made the Self-Loading Dolly Mount. This handy tool helps make their day a bit safer, a bit easier, and a bit better.

Able to load and unload dollies quickly and efficiently, you can rely on the Self-Loading Dolly Mount. This shock assisted mount allows the tow truck operator to load dollies from their power zone, the optimal lifting position for users that eliminates back and shoulder strain. Additionally, it eliminates side frame and truck bed damages from impacts with the dollies. To absorb these benefits, operation is a breeze. To pull the mount down, engage the release handle and gently pull back on the dolly. The dolly will float down to the operator with shock assistance. To mount or dismount the dolly, engage the cup latch on the tilt cup. This will open the tilt cup or lock the tilt cup into place. Lastly, pull the release handle and guide the mount back up as the shock assistance takes away all the lifting. For one last securing method, insert the latch pin to prevent the dolly side frame from falling in transit. It's that easy!

Additionally, it also protects tow truck operators and their equipment by preventing them from getting on the bed of the truck, especially trucks with high beds. No need to worry about slipping or falling off, as you can stay in one spot on the ground while it loads. Plus, like previously mentioned, its lock pin/latch mechanism prevents the dollies from falling down in transit, preventing damage to the side of your vehicle and the dollies. More importantly, it eliminates the chances of an accident caused by an unstable mount. By locking it in place, the tow truck operator can feel safe knowing it won’t cause any problems on the road.

Another great feature of the dolly mount is that it’s designed to fit most dollies. With it's adjustable wheel mount brackets for both 4.80 and 5.70 sized tires, this mount ensures you can easily integrate into your specific system. Plus, with how easy it is to use, it will speed up any job you’re on. Why wouldn’t you want this on your truck?

• Sold as a Pair
• Easy unloading, restowing, and mounting
• Steel construction
• Adjustable wheel mounting brackets to accommodate both 4.80 and 5.70 size tires
• Pull Down Mount: Engage release handle and pull back on dolly--dolly floats down to operator with shock assistance
• Dollies Off/On: Release cup latch to remove dolly from tilt cup or release and lock cup latch to mount dolly onto tilt cup
• Lift Up Mount: Pull release handle and guide dolly up with shock assistance
• Shock spring does all the heavy work (no more heavy lifting)
• Holds dollies on the bed of a truck
• Latch/pin/lock for securing
• Compatible with most dollies including In The Ditch and Collins
• There is a spacer that can be removed to accommodate the bigger tube on the ITD dollies
• Dolly retrievable in the power zone
• Compact set up
• Great for trucks with higher beds
• Replacement shock # BP-3023460

Zip's Cam Locks have a plunger and spring design that is easier and more reliable to use than the old style locking pins. Allows for one hand operation to open the assembly and put it into the automatic locking positions. The pin will fully engage once the holes in your bar line up. Used on sling arms, stabilizer legs, wheel lift forks and more.

These quality tow dolly mounts from Zip's were specifically designed to be installed on any self-loading wrecker built by Miller Industries. Select from two different item numbers to accommodate either Collins or In the Ditch branded dolly sets. Mounted on the rear slope of the wrecker body for quick and ergonomically-friendly access to the dolly, these brackets are perfect for the serious light duty towing operator. We try to make your life a little easier and safer on the road!

Free up valuable storage space in your light-duty wrecker body with these surface-mount GoJak dolly mounts from Zip's. The black powder-coated steel rack is bolted to the deck of the wrecker and is angled to account for the slope of the wheel well. The GoJak dollies slip vertically into the welded 2" receiver tubes and secured for transport with two hitch pins.

These are custom GoJak mounts from Zip's. These holders are available either powder coated black or are galvanized. Each bracket will hold up to 2 GoJak's.

This kit includes four replacement wheels and four replacement casters for GJ6200 GoJak dollies.

These are custom made dolly axle storage brackets that are used to store your dolly axles on the body of your light duty wrecker. These are made specifically for Vulcan 810, 812, and Century 312 Wreckers.

Cam Lock plunger pin kit for Holmes TS-101 towsling and DFT-200 wheel lift receivers. 5/8" diameter pin.

Keep the axles for your tow dollies protected and out of the way so they don't get damaged by installing this welded steel axle mount inside your wrecker's crossover tunnel box. This powder-coated rack bolts to the top of your tunnel to preserve valuable floor space inside your toolbox. The mount locks the axles in place to prevent shifting and sliding during transit. Besides the axles, the rack also holds a dolly's breakover bar for easy access once those components are needed.

Equip your Holmes TSV towing and service truck with this towing accessory kit. This all -inclusive kit provides everything you need to properly tow most autos down the road. It includes Collins zinc-plated tow dollies with aluminum axles, auto-positioning dollies from Go-Jak, and a Towmate wireless towlight. Also included are mounting brackets specifically designed for all the accessories to be efficiently stored on the Holmes TSV.

These are custom made dolly axle storage brackets that are used to store your dolly axles on the body of your Chevron 408 light duty wrecker.

Zip's Retaining Plate can be used for ZP-DM-810-ITD, ZP-DM-408-ITD and ZP-DM-810

Give the wheels on your tow dollies a place to rest on the deck of your light-duty wrecker with this pair of aluminum tire stands from Zip's. This replacement part works with the Zip's Lift Assist Dolly Mount (Item # ZP-DM-SL) and is the only adjustable tire mount available on the market. The top plate on these two-piece brackets is contoured to the shape of the tire, and both stands are mounted to the surface of the deck. Each side of the cradle is slotted for adjustability. Simply loosen the four bolts and slide the bracket to the desired height.

This kit includes four replacement wheels and four replacement casters for GJ5000 GoJak dollies.

These are custom made dolly axle storage brackets that are used to store your dolly axles on the body of your Vulcan 892 light duty wrecker. These storage brackets include 2 pieces, enough to hold 2 dolly axles on your wrecker.

Note: Special Handling Fees Apply   Please Note: Product Discontinued - ALL SALES FINAL!
Discontinued items are not eligible for return. View Returns Policy  

Keep the axles for your tow dollies protected and out of the way so they don't get damaged by installing this welded steel axle mount inside your wrecker's crossover tunnel box. This powder-coated rack bolts to the top of your tunnel to preserve valuable floor space inside your toolbox. The mount locks the axles in place to prevent shifting and sliding during transit. Besides the axles, the rack also holds a dolly's breakover bar for easy access once those components are needed.

• Holds two axles, one breakover bar
• Bolts inside tunnel box at top
• Welded construction
• Powder-coated black
• Easy access to equipment
• Components stay locked down
• Prevents shifting during transit
• Dimensions: 64" L x 10" W x 2 1/2" H
• Mounting Point to mounting point: 8 1/2"
• Size of holes 3/4"

Zip's Custom dolly tray for car carrier. This dolly tray is for 5.70 dollies. This custom dolly tray allows you to store your dollies out of the way while still being able to have easy access to the dollies.

These are custom sliding drawer systems that will hold your GoJak's on your car carrier. These are custom sliding drawer systems by Zip's. These systems are designed to work with either the standard control housing, or with the SP9000 control housing if your carrier is equipped with a sidepuller. This drawer system is designed specifically for Miller 10, 12 and 16 series carrier models.