Tool Mounts and Brackets

Get your truck organized with this Frame Fork Storage Rack. This frame fork storage rack will easily mount in most tool boxes. The 23" rack can hold 6 regular forks and the 30" can hold 4 regular forks and 2 spring lift adapters. It fits most side box compartments. In a matter of minutes you can bolt the mount in place and keep all your forks in one place. This rack is made from 1/8" thick aluminum that will last forever and doesn't need to be painted.

This Broom and Shovel Rack is the perfect way to store your brooms and shovels. Mount this rack to the deck, wall, or roof for easy access. The angle of the mount can be adjusted to the angle that is most convenient for you. Come pre-drilled for bungee cords to make securing your brooms and shovels easy. The rack also comes with a bolt-on bracket that keeps your broom head or shovel head flat.

In The Ditch Peg Board Mounted Aerosol Can Holders come in 3 different sizes: (1) Can (3) Can and (6) Can holders. Our spray can holders are a great way to not only store your aerosol cans, they work great to keep your aerosols organized and easy to access. Our peg board spray can storage racks are made from steel and are powder coated in a black finish. The hole spacing for mounting our aerosol storage racks are made so you can install them in peg board using our Quick Mount Peg Board Screw . Installing your spray can rack is simple, just line up the mounting holes with the peg board holes and install our peg board screws. It s that simple! No drilling, no measuring, no leveling and best of all you can reuse the peg board screw over and over with no damage to the peg board hole. If you want to install the aerosol holder on any flat surface, just the type of hardware for each mounting surface. You can mount with pegboard mounting screws, dry wall screws, metal screws or mount to wood with a wood screw, it s your choice. We designed these for use in our manufacturing facility and put a lot of thought into getting everything just right. Like most of the products we make, we designed them because no one seemed to build what we wanted that actually worked.

This cord holder is a great way to not only securely store your power cords and air hoses but also keep them organized and easy to access. These are also perfect for a variety of hammer types and sizes to keep them at the ready above your workbench. Aluminum alloy construction and our Endurance Black Powder Coat Finish keeps your Air Hose Mount looking sharp even after years of faithful service. Mounting to any surface in your garage or trailer is simple, just select proper mounting hardware for pegboard, wood, metal or even drywall. We designed these for use in our manufacturing facility and put a lot of thought into getting everything just right. Like most of the products we make, we designed them because no one seemed to build what we wanted that actually worked.

Keep all your chains and snatch blocks organized and easily accessible with the In The Ditch Snatchblock and HD Chain Holders. Available in 9", 12", and 15" lengths to meet your storage needs. Mount them up on your wall, ready to use and professionally displayed. These racks have a 250 lb load rating, just remember that it s up to you to mount them securely to a strong enough surface to handle the weight. Aluminum alloy construction and our Endurance Black Powder Coat Finish keeps your Snatch Block and Chain Mount looking sharp even after years of faithful service. Mounting to any surface in your garage or trailer is simple, just select the appropriate hardware for your mounting surface. We designed these for use in our manufacturing facility and put a lot of thought into getting everything just right. Like most of the products we make, we designed them because no one seemed to build what we wanted and actually worked.

This 3-In-1 Hook Rack from In The Ditch has become very popular because with its modular design, the uses are limitless. Each hook has an inside depth of 2-3/4", making it just the right size for hard hats, extension cords, tape rolls, wire rolls, and so much more. Each 3-In-1 rack comes with 4 arms that can be installed in any of the 5 slots so you can choose where to put it. If you need a larger hook be sure to shop for the XL Modular Hook Rack, ITD-1249.

Get your garage and trailer organized today with our In The Ditch Garage Wall Shelves. They come 3" width and are available in 6", 12", and 18" heights and depths. Sturdy steel construction and Endurance Black Powder Coat Finish will give you years of reliable service with a clean, sharp look. These wall mount shelves are stout enough to hold up to your storage needs and keep you organized. Our metal wall shelves work great on any flat surface including metal, drywall, wood, and peg board using our optional hardware tailor made for your application.

We offer models to hold 4", 6", 8", and 14" length ties and a combination organizer to hold all 4 lengths. Our combination zip tie holder is a great way to not only store all your zip ties, it works great to keep your ties organized and easy to access. Made from steel and with a powder coated in a black finish, so you know it s built tough. You can install our Zip Tie Holders on any flat surface in your garage or trailer. Choose pegboard mounting screws, dry wall screws, metal screws or wood screws to mount the zip tie mount, it s your choice. We designed these for use in our manufacturing facility and put a lot of thought into getting everything just right. Like most of the products we make, we designed them because no one seemed to build what we wanted that actually worked.

Our Aluminum Wall Hooks are a versatile and easy option to organize your truck, shop, garage, or trailer. We offer hooks in 3", 5", and 7" lengths. The heavy-duty aluminum alloy construction gives these hooks a structural rating of 100lbs. Mounting options are nearly endless including pegboard, drywall, and any other flat surfaces. Load rating may be limited by the mounting surface.

This Aluminum Storage Rack from In The Ditch is perfect for organizing your truck, shop, garage, or trailer. They are ideal for holding shackles, or they make a great holder for brooms, shovels and rakes. This rack is lightweight and comes pre-drilled for easy installation. Each hook is 6-1/2? long and has an individual load rating of 30 lbs. Need something to hang on your new storage rack? Shop our selection of

Keep your tool box organized with this Lug Wrench Bracket from In The Ditch. This pre-drilled mount easily bolts to the inside of your tunnel box and allows operators to reach lug wrenches quickly. This handy bracket holds 2 standard size lug wrenches. Shop our selection of

This Aluminum Storage Rack from In The Ditch is perfect for organizing your truck, shop, garage, or trailer. They are ideal for holding shackles, or they make a great holder for brooms, shovels and rakes. This rack is lightweight and comes pre-drilled for easy installation. The hook is 6-1/2" long and has an individual load rating of 30 lbs.

In The Ditch Drill and Power Tool Holders are made from aluminum and powder coated in a black finish to provide year after year of faithful service and a clean, sharp look. Mounting these power tool holders on any flat surface in your garage or trailer is easy, just select the appropriate hardware to match your mounting surface. You can choose dry wall screws, pegboard screws, metal screws, or wood screws to mount your cordless tool holders. We designed these for use in our manufacturing facility and put a lot of thought into getting everything just right. Like most of the products we make, we designed them because no one seemed to build what we wanted that actually worked.

In The Ditch designed The Time Saver Scissor Lift Organizer to not only install quickly but to help you keep the worksite clean, efficient, and organized. Today, everything is about saving time and working smarter not harder. The Time Saver Scissor Lift Organizer does it all. We also designed this scissor lift storage bin to be OSHA Compliant With 2 different Storage / Organizers, you have lots of options on how you organize your Scissor Lift. The top Tray is 10.25 Long, 13.75 Wide and 5.25 Deep and comes with 2 moveable Dividers. This is the perfect tray to place your most frequently used tools and keep handy and organized. The Lower storage bin is 5.75 Long x 15 wide and 3.25 deep and has a sloped front for easy access. The upper back portion has a width of 2 1/8". With 2 moveable Dividers, the lower storage bin is a great place to keep, nuts bolts, screws, etc. all organized and ready for use. Built from Marine Grade Aluminum and Powder Coated Safety Yellow, this Scissor Lift Organizer Bin will last for generations to come. Our Scissor Lift Organizer Trays Fit all popular Scissor Lifts on The Market and are a great Gennie Lift Organizer Tray, Skyjack Organizer Tray, JLG Scissor Lift Organizer Tray, Snorkel Lift Organizer Tray. Save Time and Money on the job site by getting organized today with the Full Line of Scissor Lift Organizers by Inventive Products.

Keep your paper towels and cleaning supplies at the ready in your garage and trailer with our Paper Towel Holder with Shelf. Sturdy steel construction and Endurance Black Powder Coat Finish will give you years of reliable service with a clean, sharp look. This shop towel rack includes a hold-down flap that keeps your towels from unspooling in the breeze and perfectly positioned to pull the next sheet while the integrated shelf keeps your cleaning supplies and shop gear organized. Our paper towel rack with shelf works great on any flat surface including drywall, wood, metal, and pegboard using our optional hardware.

Get your quart can and bottles organized today with our In The Ditch Quart Can and Bottle Storage Racks! Our Oil Can and bottle holders are a great way to not only securely store your oil and spray bottles, but also keep them organized and easy to access. Each bottle is held individually to prevent tipping/sliding/spilling and the separation makes for quick and easy removal and replacement. Sturdy steel construction and our Endurance Black Powder Coat Finish keeps your Oil/Spray Bottle Mount looking sharp even after years of faithful service. Mounting to any flat surface in your garage or trailer is simple, just select appropriate hardware for your mounting surface: pegboard screws, wood screws, self-tapping metal screws, or drywall screws. We designed these for use in our manufacturing facility and put a lot of thought into getting everything just right. Like most of the products we make, we designed them because no one seemed to build what we wanted that actually worked.

This headset holder is a great way to not only securely store your ear muffs and welding helmets but also keep them organized and easy to access. These are also perfect to hang a variety of small cords, hats, and coats to keep them at the ready in your shop. Aluminum alloy construction and our Endurance Black Powder Coat Finish keeps your Ear Muff Mount looking sharp even after years of faithful service. Mounting to any surface in your garage or trailer is simple, just select the appropriate hardware for your mounting surface.

This 6 " or 11" Shelf from In The Ditch is great for your home, shop, or garage. It is perfect for shop books, cans, or just about anything you can fit. The shelf installs with the gussets up, which creates a shelf with a lip, or turn it over with the gussets down to create a smooth top shelf. The pre-drilled holes are 16" apart so they can be screwed to a stud with ease.

Keep your grease gun at the ready with our In The Ditch Brand Grease Gun Holder with Drip Tray. This grease gun holder is a great way to not only securely store your grease gun in a ready-to-go condition and easy to access but also stores an extra tube of grease for quick change out. Also included is a small drip tray and hose routing loop to contain any leaks during storage to keep your shop, garage, or trailer neat and clean. Sturdy Steel construction and our Endurance Black Powder Coat Finish keeps your Grease Gun Mount looking sharp even after years of faithful service. Mounting to any surface in your garage or trailer is simple, just select appropriate hardware for your mounting surface.

These aluminum wall hooks from In the Ditch are a versatile and easy option to organize your truck, shop, garage, or trailer. These hooks are offered in 3", 5" and 7" lengths. The heavy duty aluminum alloy construction gives these hooks a structural rating of 100 lbs. Mounting options are nearly endless including pegboard, drywall, and any other flat surface. All of the necessary hardware is included to make installation quick and easy.

Get your garage and trailer organized today with our In The Ditch Garage Wall Shelves. They come 3" width and are available in 6", 9", and 12" heights. Sturdy steel construction and Endurance Black Powder Coat Finish will give you years of reliable service with a clean, sharp look. These wall mount shelves are stout enough to hold up to your storage needs and keep you organized. Our metal wall shelves work great on any flat surface including metal, drywall, wood, and peg board using our optional hardware tailor made for your application.

This Paper Towel Rack from In The Ditch is perfect for your garage, shop, or bathroom. It comes with a double rack that can hold two rolls of traditional paper towels, or work towels.

Federal DOT Laws require that everything on the deck or bed of a commercial carrier is to be secured while in transit. We set out to solve this simple problem and come up with our In The Ditch 4x4 Lumber Holder Kit. With our 4X4 Lumber Holder you will be D.O.T compliant, organized and will look good going down the road. Each kit includes two holders made from aluminum. These 4x4 Holders can be mounted anywhere and will work with any length of 4x4. If you are worried about theft you can also lock your 4x4 using a Pad-Lock.

Keep your air tools close to hand and ready to use with In The Ditch's Air Tool Holders, available in three models to hold 1, 2, or 3 air tools. If you re tired of wasting time searching through crowded toolbox drawers for the specific air tool you need then these racks are what you ve been looking for. Keep them out front and center, ready to use and professionally displayed. Designed to securely hold all air tools with standard 1/4" fittings while clearly displaying the entire tool for quick reference and retrieval. Hanging air tools from the quick connect fitting gives our rack the versatility to be used with any of the various tool shapes and sizes available today. Aluminum alloy construction and our Endurance Black Powder Coat Finish keeps your Air Tool Mount looking sharp even after years of faithful service. Mounting to any surface in your garage or trailer is simple, just select your mounting surface and see the optional hardware to match, no guesswork required. We even offer the right driver for flawless installation. We designed these for use in our manufacturing facility and put a lot of thought into getting everything just right. Like most of the products we make, we designed them because no one seemed to build what we wanted and actually worked.

Keep your pliers close to hand and ready to use with our Plier Holders, available in three models to hold 1, 2, or 3 pliers. If you re tired of wasting time searching through crowded toolbox drawers for the specific set of pliers you need then these racks are what you ve been looking for. Keep them out front and center, ready to use and professionally displayed. Designed to securely hold a wide variety of pliers types and sizes while clearly displaying the entire tool for quick reference and retrieval. Aluminum alloy construction and our Endurance Black Powder Coat Finish keep your Pliers Mount looking sharp even after years of faithful service. Mounting to any surface in your garage or trailer is simple, just select appropriate hardware for your mounting surface. We designed these for use in our manufacturing facility and put a lot of thought into getting everything just right. Like most of the products we make, we designed them because no one seemed to build what we wanted that actually worked.

Keep all your tie downs and chains organized and easily accessible with the In The Ditch Tie Down Strap Hangers. Available in 9", 12", and 15" lengths to meet your storage needs. Mount them up on your wall, ready to use and professionally displayed. These racks have a 150 lb load rating, just remember that it s up to you to mount them securely to a strong enough surface to handle the weight. Aluminum alloy construction and our endurance black powder coat finish keeps your tie down mount looking sharp even after years of faithful service. Mounting to any flat surface in your garage or trailer is simple, just select appropriate hardware for your mounting surface: pegboard screws, wood screws, self-tapping metal screws, or drywall screws. We designed these for use in our manufacturing facility and put a lot of thought into getting everything just right. Like most of the products we make, we designed them because no one seemed to build what we wanted that actually worked.

This Rack from In The Ditch holds aerosol cans, and has spots for your air tools. These slots can hold things like pliers, and all standard 1/4" air fittings. Like most In The Ditch products this rack comes with pre-drilled holes for easy mounting. This rack is perfect for organizing your truck or shop so be sure to get yours today!

Get your push broom off the floor and keep it close to hand and ready to use with our Push Broom Holder! You no longer need to set it on the floor leaned up against the wall in the corner. Protect the bristles and keep it front and center, ready to use and cleanly displayed with our wall mount. Aluminum alloy construction and our endurance black powder coat finish keep your push broom hanger looking sharp even after years of faithful service. Built to accommodate a wide variety of push broom sizes and styles. Mounting to any flat surface in your garage or trailer is simple, just select appropriate hardware for your mounting surface: pegboard screws, wood screws, self-tapping metal screws, or drywall screws. We designed these for use in our manufacturing facility and put a lot of thought into getting everything just right. Like most of the products we make, we designed them because no one seemed to build what we wanted that actually worked.

Keep your screw drivers close to hand and ready to use with our Screw Driver Holders, available in three models to hold 1, 2, or 3 drivers. If you re tired of wasting time searching through crowded toolbox drawers for the specific screwdriver you need, then these screwdriver racks are what you ve been looking for. Keep them out front and center, ready to use and professionally displayed. Designed to securely hold a wide variety of screwdriver types and sizes while clearly displaying the entire driver for quick reference and retrieval. Aluminum alloy construction and our Endurance Black Powder Coat Finish keep your Screw Driver Mount looking sharp even after years of faithful service. Mounting to any surface in your garage or trailer is simple, just select the appropriate hardware for your mounting surface. We designed these for use in our manufacturing facility and put a lot of thought into getting everything just right. Like most of the products we make, we designed them because no one seemed to build what we wanted that actually worked.

This easy to install shelf from In The Ditch will help you quickly organize your truck, garage or trailer. Shelf can be installed using screws in the pre-drilled holes or by using 3-M Doubled sided tape, the choice is yours. Shelf is 3? deep, 3? tall and 6? long. We also offer a

Keep your angle grinder neatly stored and ready to use with In The Ditch's Mount for 4-1/2", 5", and 7" Angle Grinders. If you're tired of your angle grinders rolling around in your toolbox then these racks are what you ve been looking for. Mount them up on the wall of your truck, ready to use and professionally displayed. Designed to securely hold a wide variety of angle grinders by the guard so you can leave on wheel and disc attachments for quick retrieval and use. Aluminum alloy construction and our Endurance Black Powder Coat Finish keeps your Angle Grinder Mount looking sharp even after years of faithful service. Mounting to any surface in your truck is simple, just select your mounting surface and see the optional hardware to match, no guesswork required. We even offer the right driver for flawless installation. We designed these for use in our manufacturing facility and put a lot of thought into getting everything just right. Like most of the products we make, we designed them because no one seemed to build what we wanted and that actually worked.

Get your garage organized today with In The Ditch Heavy Duty Locking Pegboard Hooks. They come in 5 lengths to meet your tool hanging and storage needs: 1 inch, 1.5 inch, 2 inch, 3 inch, and 4 inch. Heavy duty aluminum alloy construction makes these peg board hooks lightweight and strong. Our hooks are made so they can be installed stacked next to each other in adjacent peg holes to conserve pegboard space and keep your tool organization tight and professional looking. Designed to perfectly and easily mount directly to peg board using our optional Peg Board Screws that won't damage your peg board and can be used over and over.

This is a replacement locking pin for the In The Ditch Scissor Lift Organizer.  Part #

In The Ditch Drill and Power Tool Holders are made from aluminum and powder coated in a black finish to provide year after year of faithful service and a clean, sharp look. Mounting these power tool holders on any flat surface in your garage or trailer is easy, just select the appropriate hardware to match your mounting surface. You can choose dry wall screws, pegboard screws, metal screws, or wood screws to mount your cordless tool holders. We designed these for use in our manufacturing facility and put a lot of thought into getting everything just right. Like most of the products we make, we designed them because no one seemed to build what we wanted that actually worked.

In The Ditch Drill and Power Tool Holders are made from aluminum and powder coated in a black finish to provide year after year of faithful service and a clean, sharp look. Mounting these power tool holders on any flat surface in your garage or trailer is easy, just select the appropriate hardware to match your mounting surface. You can choose dry wall screws, pegboard screws, metal screws, or wood screws to mount your cordless tool holders. We designed these for use in our manufacturing facility and put a lot of thought into getting everything just right. Like most of the products we make, we designed them because no one seemed to build what we wanted that actually worked.

Keep your angle grinders neatly stored and ready to use with In The Ditch's Storage Racks. If you re tired of wasting toolbox and work space with bulky angle grinders then these racks are what you ve been looking for. Mount them up on your wall, ready to use and professionally displayed. Designed to securely hold a wide variety of angle grinders by the guard so you can leave on wheel and disc attachments for quick retrieval and use. Aluminum alloy construction and our Endurance Black Powder Coat Finish keeps your Angle Grinder Mount looking sharp even after years of faithful service. Mounting to any surface in your garage or trailer is simple, just select appropriate hardware for your mounting surface.

Keep your tire pressure gauge close to hand and ready to use with In The Ditch's Pegboard Air Pressure Gauge Holder. Don't tuck your gauge into a toolbox drawer never to be seen again. Keep it front and center, ready to use and cleanly displayed. Designed to securely hold a wide variety of dial type air gauges while maintaining quick and easy access with an angled cradle and keeper flanges at the front to prevent the gauge from falling out. Aluminum alloy construction and our Endurance Black Powder Coat Finish keep your Pressure Gauge Hanger looking sharp even after years of faithful service. Our air pressure gauge rack is ready to mount to any surface in your garage or trailer, just select the appropriate hardware for your mounting surface. We designed these for use in our manufacturing facility and put a lot of thought into getting everything just right. Like most of the products we make, we designed them because no one seemed to build what we wanted that actually worked.

Get your garage and trailer organized today with our In The Ditch Garage Wall Shelves. They come 16" width and are available in 6", 9", and 12" heights and depths. Sturdy steel construction and Endurance Black Powder Coat Finish will give you years of reliable service with a clean, sharp look. These wall mount shelves are stout enough to hold up to your storage needs and keep you organized. Our metal wall shelves work great on any flat surface including metal, drywall, wood, and peg board.