Free shipping is only valid on total purchases of $199 or more and ground shipments within the contiguous 48 states for products weighing less than 150 lbs. Special handling fees may be required for some products.Shipping fees will be added for all orders under $199 or that include oversized items or any item of 150 lbs or more. Please contact customer service if you have any questions.
Browse our line of premium products and replacement parts from Associated Equipment including battery chargers, portable jump packs, jumper cables and more.
Keep your hood closed with a truck-mounted battery booster cable plug-in from Associated Equipment. The stainless steel receptacle bolts onto your vehicle's bumper and connects directly to your battery. With 30', 4-AWG tangle-free starting cables, you'll be able to reach stalled vehicles from the front, back or side. GL6139 offers the socket box along with the 30' cable set. GL6138 offers only the plug-in jump-start cables. GL6137 offers the stainless steel socket box.
This polarized plug-in stainless steel socket panel mounts flush to the grill or bumper of your vehicle. Includes 5'L, 4 AWG tangle-free dual extruded cable.
Designed with the operator and customer in mind, plug-in starting system starts cars conveniently, faster and safer. Connection made without ever lifting service truck hood. Features a weatherproof socket and polarized plug with options of 25' or 30' of tangle-free cables. Solid copper jaws and insulated clamps with "Flexi-Spring" cable guards.
Two 12 Volt 22Ah Heavy Duty Sealed AGM Batteries provide "Best in Class" performance. This unit jump starts with 720 CCA of portable power. It has a three position, 12V/ OFF/ 24V switch with Easy-to-read LED Battery Status Indicators. Ideal for jump-starting cars, trucks, boats,RV's and tractors.
These chargers are safe for AGM and sealed lead acid batteries and vacuume impregnated heavy-duty transformer to seal the unit against external agents. Includes multi-diode rectifiers (patented) to take over in case of failure. The charger includes a fan cooling mechanism preventing overheating, this enhances the unit's life span significantly. The unit will not arc or spark and is safe in any weather for operation. Includes patented "Flexi-Spring" cable guards relieving cable stress and is built with a heavy-duty chrome plated handle.
The 6006AGM Associated battery charger is one of the highest performance fleet automotive battery charger on the market, and comes manufacturer's best boost rating of 280 Amps. The charger is used for 6, 12 and 24 volt batteries. Heavy-duty transformer, patented "Sub-Sil" multi diode rectifiers along with a longer AC cord and DC leads are standard features for higher performance. UL listed for indoor and outdoor use safe in any weather.
This exclusive heavy duty sealed AGM battery provides "best in class" performance. Instantly jump-starts without the need of another vehicle. Equipped with two 12 volt DC accessory outlets to power and/or recharge DC electronics.
US20 is an automatic boosting battery charger. Built as a wheel charger with a 90 minute timer. The charger includes a 6 ft. power cord along with a convenient clamp bar for easy storage of clamps. It features a 90 minute timer with HOLD and a fan cooling mechanism preventing overheating enhancing the unit's life span significantly along with an all weather operation.
Highest performance fleet, heavy duty car charger on the market. Option of 375 Amp or 400 Amp boost rating crank assist. 6001A charges 6/12 volt batteries and 6002B charges 6/12/18/24 volt batteries. Heavy-duty transformer, patented "Sub-Sil" multi diode rectifiers, longer AC cord and DC leads are standard features for higher performance. Features fully insulated "Flexi-Spring" clamps, the strongest in the industry. An automatic timer for accurate charging with "Stop/Go" light polarity protection. Built with heavy-duty chrome plated handle and rugged 7" wheels. UL listed for indoor and outdoor use, "Safe In Any Weather".
ATEC? Hand-Held Battery Load Tester, Alternator and Starter Tester. 125 Amp Fix Load. Recessed meter helps protect this handheld tester from damage and ensures more accurate and reliable outputs. Features easy to use clamps with 300 Amp jaws. Lightweight and easy to use. Perform these diagnostic tests, State of charge, Battery load test, Starter test, Charging System test.
Professional quality heavy duty 500 amp replacement clamps for all booster cables. Replace Associated clamps or other manufacturer's products with these professional quality insulated clamps. Clamps incorporate Associated's innovative "Flexi-Spring" for long cable life at the point it bends most.
Associated Equipment's Model 6010B Heavy-Duty Portable Battery Charger charges all standard and maintenance-free 6/12/24V batteries. The handheld charger features four charging positions and includes a 120-minute automatic timer. Internal fan cooling prevents overheating, and the patented Stop/Go indicator light protects against incorrect polarity.
Carbon Pile Load Tester handles all 6/12 Volt batteries. Two large 4.5" meters display amperes and volts. DC test leads are 2.5' 4 AWG Cable. Unit comes with manual adjust knob. Buzzer sounds after load is engaged for 15 seconds.
6024 Associated Battery Tester provides a full 125 amp load test on 12 volt and 24 volt batteries, alternators and starters on all types of vehicles. It is lightweight and easy to use. This hand-held tester has a recessed meter to protect from damage. Features heavy-duty insulated safety clamps with 300 amp jaws and side terminal adapters. Durable and built for safety.
The KS40 models are built to last with a heavy duty impact-resistant case with a rubber base. Excellent for job sites, professionals, and heavy duty field use. Instantly jump-starts without another vehicle. Features a digital LED display with state of charge readings along witha built in digital voltmeter performing light diagnostics. Option of 36" or 84" DC leads with KS401 being the longest jumpstart cables in the industry.
These heavy-duty 800A plug-in cables from Associated work with the GL6146 truck kit. The extra-long starting cables reach stalled vehicles up to 25 feet away and feature Associated's patented "Stop/Go" light. They are rated to perform at temperatures down to 40 degrees below zero.
Model 6127XL is an on-board starter battery with more cranking power than any fast charger with up to 1100 Amps cranking power. This charger assists both customers and employees where there is no electrical power along with recharging batteries up to 20x faster than hand-carried units. Plugs into an AC outlet for rapid automatic recharging. Solid state circuitry monitors the battery condition and maintains max. state of charge. Includes a patented "Stop/Go light" on cable and 500 Amp insulated clamps with patented "Flexi-Spring" cable guards which warns the operator before making a reverse connection. Designed for easy and quick handling, safety, and protection from weather. Fully automatic, 10-amp charger recharges starter battery or any on-board 12-volt battery. ***Battery NOT included***
This 1.5 Amp 12 Volt battery charger/ maintainer automatically powers on when needed. Float mode engages when battery is fully charged. The durable plastic case prevents damage to charger from oil, water, gasoline and other automobile fluids.
Intellamatic 12 Volt AGM GEL Flooded Technology Automotive Battery Charger Analyzer Power Supply is perfect when just a little more power will do! Connect the terminals to your small or large battery and let it do the work. This charging system can perform the function of a battery charger, trickle charger, and a battery tender (can be left connected to battery to maintain charge) as well as "DEEP DISCHARGE RECOVERY". Electrical Stability System (ESSTM) technology feature is a stable 25 Amp power supply for extended service procedures or re-flashes and best of all it's Made in America. Whether you are dealing with a motorcycle or a large truck battery, the 9425 won't overcharge, because of its automatic float system. Three LED lights on front panel will tell you the state of charge. This portable and versatile charger will charge all 12 volt batteries.
The model 12-2415 analyzer performs 12V battery and electrical systems testing including the ripple diode test and earth ground as well as 24V starter and alternator systems. The tester has an integrated thermal printer with customizable header for shop use as well as the ability to key-in particulars for the battery model, vehicle license plate and customer name and is reverse-polarity protected.
This unit is for use with Models 6075, 6075CB & 6075S Bus Bar. 300 Amp insulated safety clamps when used with 6075. Automatic with 3 settings: Flooded, AGM and Manual.
This bus bar set is for parallel charging, ensuring a convenient way to hook up to four batteries/vehicles in parallel. It has a 10 battery capacity and you can use one or combine additional bars for added capacity. This is constructed with an insulated fiberglass backboard including 10 pairs of DC charging leads, 8-1/2 GA and 300 Amp insulated safety clamps.
6366 Associated 4 x 20 Industrial Gang Charger for Standard Automotive, Deep-Cycle, AGM and Gel Cell Batteries - Fully-Automatic charging channels that control voltage and current up to 20 Amps per circuit. Four sets of LED indicators showing charging status by battery. Four sets of detachable 6 foot leads with 300 Amp heavy duty clamps. Charges all types of 12 volt batteries, AGM Batteries, Gel Cell Batteries, Sealed Batteries, Standard Flooded Batteries - including Spiral Cell, Orbital, or Optima batteries. Patented diagnostics indicate weak or defective battery.
6044 Associated Equipment Model 6044 Automated Battery / Electrical System Tester with 6038C Cart - This is an automated battery testing unit that uses no dirty, maintenance-prone carbon piles. Just enter the discharge current, press the ?start? button and the 6044 will perform the BCI battery test automatically, giving the most accurate means of testing a battery. Testing for the alternator and starter has also been automated, simplifying the use of this very versatile electrical tester. The 6044 also comes with external voltage leads which can be used to record the maximum and minimum voltage readings allowing for easy testing of electrical systems (including testing differential voltages). The unit also comes with a detachable inductive pickup (6043) which can be used to read current throughout the electrical system and a heavy-duty tilt-back cart (6038). The tester will also record the minimum and maximum current values turning many two person operations into a single, individual job.
Full 125 AMP load tests 6 and 12 volt batteries, along with alternators and starters on all types of vehicles. Durable and built with a recessed meter to help protect this hand-held tester from damage. Features heavy duty insulated safety clamps with 300 AMP jaws and side terminal adapters. Capable to test the state of charge, battery load test, starter test and charging system test. The tester draws current from the battery while measuring its voltage level; the voltage level of a good battery will remain relatively steady under load, while a defective battery will show a rapid loss in voltage.
The 6033 Associated Digital 125 Amp 12 Volt Load Tester takes the power of our 6030 and adds features for performance. A Digital 125 Amp load tester that computes the CCA of the battery. The heavy 125 Amp load enables the 6033 to detect bad batteries that are some times missed by the electronic testers. Performance Features: Kelvin connected digital meter displays current battery voltage, maxim um voltage reading, minimum voltage reading, CCA of the battery under test, load test time (varies with the battery for shorter test ing time). Lightweight and easy to use. Also features a recessed meter and insulated clamps. Patent Pending.
Heavy duty cart with 3 shelves, 2 large rear wheels, and a large handle that is precision designed to assist you in transporting your Associated Equipment chargers and load testers around the shop or home garage.
12-1015 Associated digital battery electrical system analyzer starter, alternator, ground and battery test with built-in thermo printer and USB port. The unit is a light weight hand-held digital battery tester storing the last 250 test series with or without power. Tests all types of flooded acid batteries, AGM flat plate and spiral, gel cells and enhanced flooded batteries. Easy to read in all light conditions featuring a back lit display. Battery test displaying estimated remaining life of battery in percent, battery quality (good or replace), internal resistance of battery, open circuit voltage of battery at test, battery CCA rating after test, and imputed CCA of test being performed. Starter test displays the lowest voltage of the battery during start and voltage drop ( normal or high). The alternator test displays good/low/high, average/max./min. during test for loaded and no load test, and checks diode ripple.
The 6080A Associated 6 Amp Battery charger for "Flooded" or wet automotive and "Maintenance Free" batteries. Charge up to 36 Cells ( 6 batteries) in Series. New technology enables higher output voltage for charging new batteries and rejuvenating sulfated batteries. Fully charges six maintenance-free batteries at a time. Has an isolated transformer for better safety, plus circuit breaker protect ion. Includes five charging leads. Mounts on wall or benchCharging Jumper Cups are used to connect batteries with top post connectio ns. Connecting batteries in series (see illustration) allows a person to charge a number of batteries at one time using only one low current, high voltage charger. The amount of charge that each battery receives is indicated by the ammeter. Thus, each battery will arrive in a fully charged condition at a different time. Conditions that affect charging time are battery temperature, size, state of charge, type of battery, and other factors. Six and twelve volt batteries may be intermixed when series charging. The total volta ge of the batteries should not exceed the rated voltage of the charger. Example: A Charger is rated a nominal 36 cells. Six 12 volt batteries in series or twelve 6 volt batteries in series can be charged or any combination of six and twelve volt batteries that tot al 36 cells. To charge batteries in series, connect the charger's positive lead to the positive post of the first battery. Connect a jumper from the negative post of the first battery to the positive post of the next battery. Continue until all batteries are conne cted. Attach negative lead of charger to remaining battery post.
Model 6127 Kwik Start jump starter gives more cranking power than any fast charger with up to 1100 amps cranking power. The jump starter assists both customers and employees where there is no electrical power and designed for safe handling in any weather. Includes a safety patented "Stop/Go light" on cable and 500 Amp insulated clamps with patented "Flexi-Spring" cable guards which warn operators before making a reverse connection. Designed with a convenient clamp bar for easy and safe storage of clamps when not in use. * Battery Not Included*
The Associated 6039 provides complete testing for 6 and 12 volt systems in a small package. Simple tests include a state of charge test, battery load test,starter test and charging system test. Easy to read digital voltmeter and ammeter combine with the versatility of a carbon pile load to give quick and precise determination of battery and charging system problems. Spring loaded load knob shuts off automatically. This 0-600 Amp 0-19 volts DC tester has unique curved discs to prevent hot spots. Heavy duty clamps with "Flexi-Spring" cable guards provide added value. The load tester is an easy-to-read, digital voltmeter and ammeter combine with the versatility of a carbon pile load to give a quick and precise determination of battery and charging system problems.
IBC6008MSK Associated Intellamatic 12 Volt - 60 Amp / 270 Amp Boost Wheel Automotive Battery Charger and 70 Amp Power Supply with 15 Amp Memory Saver Port. Includes 12? Memory Saver Cable and Terminal Covers. The IBC6008MSK provides safe effective charging at 12 Volt for Flooded / Maintenance Free, AGM, Gel Cell, Deep-Cycle and Lithium Ion Batteries. Including Spiral Cell, Orbital or Optima Batteries. The Electrical Stability System (ESS?) technology turns 6008 into a stable power supply for extended service procedures or re-flashes. During battery removal, use of the memory saver kit will allow you to maintain a nominal 13.7V DC output via the OBDII Port on your vehicle.
The CC6212 Associated Battery Cable Covers are designed for use with Memory Saver Cables or when removing batteries to prevent positive battery clamp from arcing. High Visibility & Corrosive Resistant MADE IN THE USA.
MS6209 ATEC Automotive Memory Saver Cable - This unit helps to prevent the los s of electronic memory when disconnecting the battery and using a power supply. The cigarette lighter / 12Volt accessory adapter can be used with any Associated Kwikstart receptacle and the other end simply connects to the OBDII port on any 1996 or later vehicle.
Associated Equipment 5 Amp Memory Saver 12Ft. Cable OBDII. Automotive Memory Saver Cable - This unit helps to prevent the loss of electronic memory when disconnecting the battery and using a power supply. The cigarette lighter / 12Volt accessory adapter can be used with any Associated Kwikstart receptacle, or battery charger with memory saver port (MSK Units).
The ATEC 3055A Automatic Automotive battery charger provides fully automatic charging of 6 & 12 volt Standard, GEL and AGM battery t ypes. Five charging modes are available 6V/2 Amp, 6V/4 Amp, 12V/2 Amp, 12V/10 Amp & 12V/50 Amp for engine starting. The built-in dig ital display shows the voltage before during and after charging, amperage and time on charge. Heavy-duty transformer and rectifier p rovide long life. Safety features include, built-in circuit protection, reverse polarity protection. Automatically checks for correc t connection (requires a minimum of 1 volt DC at the battery terminals). Heavy-duty cables and clamps are corrosion-resistant for be tter connections. Clamps connect to side or top mount battery terminals. Ideal for charging or boosting during winter season when th e starting performance of vehicle batteries is lowered by cold or extreme weather conditions.
6028DL Associated Combo Battery Tester offers 6/12v with 60/125 AMP dual load. Features a hand-held analog with mid-sized clamps 24" 14/2ga wire offering greater flexibility when attaching to hard to reach applications. A 60 AMP load is used for smaller batteries and a 125 AMP load is used to fully test larger batteries for both CCA and AMP hours.
The Associated 6043 inductive amp probe is capable of measurements up to 1000A. The large 2" jaw opening allows for easy use on the largest set of cables. Compatible with most Digital Multimeters, the unit comes with a 10 ft. coiled cord with standard banana plugs. The unit has two settings 200A and 1000A for improved accuracy and a zeroing button for use on DC circuits. LED's indicators include a power "ON" as well as a "LOW BATTERY". Unit is powered by a standard 9V battery for long life.
6021AGM is a 6/12/24 Volt Charger & Tester combination with a 12V AGM safe charge setting. This unit gives users the ability to choose between battery test or battery charge upon initial connection or after initial charge or test process is complete. The 'Dead Battery Override' switch recovers a dead battery and then tests it with the same unit, making the product very useful and timesaving.
Vehicle battery systems fitted to modern cars require a complex system to control and maintain the best charge and discharge rates which not only ensures the longest service life but also systems such as Stop/Start operate correctly. The 12-0200 gives the operator access to all the functions complicated and time-consuming manufacturer scan tools have to perform the same function but in a fraction of the time. On average the total time required by the technician to reset a system will be 30 seconds.
The 6078 charger is an efficient parallel automotive battery charger. This unit delivers powerful performance by being able to charge up to ten 12 volt batteries in parallel, in less than 24 hours time. It is designed to operate on 220 volts AC 50 / 60 Hz. Features a patented multidiode rectifier with a deep reserve capacity, circuit breaker protection, isolated transformer, and the option to mount on a bench or a wall.
The Associated Model 6065 battery charger is designed to charge 1 to 10 12 volt automotive batteries in parallel, in parallel, in le ss than 24 hours. Designed with the fleet or high volume shop in mind. Great for salvage yards as well. The multiple charge rates al low batteries to be slow charged or fast charged at a rate not to exceed 30 amps output of the charger. Patented multi-diode rectifi er with deep reserve capacity. The volt meter allows you to adjust the charge rate to compensate for battery type, size and quantity of batteries on a charge. The output leads are terminated in ring terminals and designed to be permanently attached to the Associat ed 6086 Parallel Battery Charging Rack, the Associated 6075 Parallel Bus Bar Kit, the Associated 6075CB Parallel Bus Bar Kit or the Associated 6075S Smart Parallel Bus Bar Kit. This unit is not intended to be used as a car starting unit.
Associated Intellamatic 40/130 Amp 12 Volt charger features advanced circuitry for charging AGM, GEL, Flooded batteries as well as operate as an Analyzer and a constant power supply for flashing vehicles. The Micro-processor controlled 40 Amp Bench Charger and Power Supply has Reverse Polarity Protection for safety, utilizes three color LEDS to monitor charging status so you always know the batteries status. For standard automotive, deep-cycle, AGM and GEL Cell Batteries. Electrical Stability System (ESSTM) technology feature is a 45 Amp stable power supply for extended service procedures or re-flashes (Nominal 13.7V DC Output). This unit also features a program for deep discharge recovery of flooded batteries saving you money on discarded batteries. Patented diagnostics indicate weak or defective battery. Battery Selector Switch For Sealed / Flooded / ESS Flash. Dead Battery Override Control. Heavy Duty Construction means it will last a lifetime. MADE IN USA
The ESS6007B Associated Equipment Automotive Battery Charger Boost Intellamatic has Electrical Stability System (ESS?) for re-flashe s. With nominal 13.7 volt DC output technology, the ESS6007B is a stable power supply for extended service procedures. It also has a program for deep discharge recovery of flooded batteries and patented diagnostics that will indicate if a battery is weak or defect ive. Designed to charge all types of 12 volt batteries including; AGM, Gel Cell, Sealed, and Standard Flooded batteries.
The series charger workhorse Charges 2-60 cells from 0 to 6 amps. With state-of -the-art, anti-spark delay, voltage is shut off when current is interrupted, eliminating sparking. Added safety feature provides greater protection when charging 10 batteries where the voltage approaches 158 volts DC. Output current can be smoothly adjusted over full range of front panel control. Polarity protection for operator and equipment safety. Nine charging leads included.
Associated Equipment's Intellematic Model ESS6011 is a versatile 12/24V, 70/35A and 200A boost wheeled smart charger with a 70A power supply for standard automotive, deep-cycle, AGM and gel cell batteries. The Electrical Stability System technology turns the ESS6011 into a stable power supply for extended service procedures or re-flashes. The charger display includes an analog meter and three-stage LED charger indicator status.
This unit is a 12v 60/70 Amp / 270 Amp boost Smart Charger and power supply with 15 Amp memory saver port for standard automotive, deep-cycle, AGM and gel cell batteries. It includes a 12' memory savor cable and terminal covers. Program for deep discharge recovery of flooded batteries and patented diagnostics indicate weak or defective batteries.
This bus bar set has a 10 battery capcity for parrallel charging for use with 6066A smart charger or other parallel chargers.It is constructed with an insulated fiberglass backboard including 10 pairs of DC charging leads, 8-1/2 GA, 72" long with 300 Amp insulated safety clamps.