Del City

Rubber grommets help eliminate risk of wire, cord or hose chaffing on applications due to metal drill holes or cutouts. Each rubber grommet is flexible and allows for simple installation by easily snapping the rubber grommet directly into the drill hole. Effective and easy to use rubber grommets ensure your wiring projects and applications are protected and last longer.

These side terminal adapters fit Associated and most other insulated clamps. They allow for easier connnections in hard to reach spots.

Rubber grommets help eliminate risk of wire, cord or hose chaffing on applications due to metal drill holes or cutouts. Each rubber grommet is flexible and allows for simple installation by easily snapping the rubber grommet directly into the drill hole. Effective and easy to use rubber grommets ensure your wiring projects and applications are protected and last longer.

Rubber GrommRubber grommets help eliminate risk of wire, cord or hose chaffing on applications due to metal drill holes or cutouts. Each rubber grommet is flexible and allows for simple installation by easily snapping the rubber grommet directly into the drill hole. Effective and easy to use rubber grommets ensure your wiring projects and applications are protected and last longer.

Rubber grommets help eliminate risk of wire, cord or hose chaffing on applications due to metal drill holes or cutouts. Each rubber grommet is flexible and allows for simple installation by easily snapping the rubber grommet directly into the drill hole. Effective and easy to use rubber grommets ensure your wiring projects and applications are protected and last longer.

Plug socket contacts complete the electrical connection of the AT Series plug housing assembly. There are three different quality grades of contacts available. All feature a copper alloy base with a standard stamped/formed nickel plate, military solid crimp nickel, or gold-plate.

The 6 way bus bar distributes power from a single input to six outputs. Insulated mounting bases have recessed mounting holes to prevent accidental shorts on conductive surfaces. The bus bar is rated for 100 amps at 48 volts DC. Two 1/4 inch studs, nuts and lock washers allow for input with 6 output #8 stud Phillip screws. This bus bar model includes a cover for added protection and durability, promoting a longer life span.

AT Series plug wedges are made from a thermoplastic material for a durable and lasting hold. Plug wedges are a necessary component in aligning the socket contacts into proper position within the plug. One (1) wedge is required per plug housing to complete the assembly. The 12-way plug wedge can be used with the standard 12-way plug or the strain relief 12-way plug.

1-1/2"ID 1/4"GROOVE 2"OD 

AT Series plug housings are considered to be the male end sealed connector of the AT series connector setup. The housings are made form a thermoplastic material that is durable and UV-resistant. Each plug includes on silicone elastomer wire seal and front housing seal to help prevent against environmental ingress.

This receiver-mount pintle hook from Curt is designed to insert into any 2" x 2" receiver tube. With a solid shank and a gross trailer weight capacity of 20,000 lbs., it offers a solid complement to most Class V trailer hitches. The pintle hook fits any lunette ring with a 2-1/2" inside eye diameter, and it comes with a spring-loaded locking arm and safety pin for secure coupling.

AT Series plug wedges are made from a thermoplastic material for a durable and lasting hold. Plug wedges are a necessary component in aligning the socket contacts into proper position within the plug. One (1) wedge is required per plug housing to complete the assembly. The 8-way plug wedge can be used with the standard 8-way plug or the strain relief 8-way plug.

AT Series plug housings are considered to be the male end sealed connector of the AT series connector setup. The housings are made form a thermoplastic material that is durable and UV-resistant. Each plug includes on silicone elastomer wire seal and front housing seal to help prevent against environmental ingress.

AT Series receptacle wedges are made from a thermoplastic material for a durable and lasting hold. Receptacle wedges are a necessary component in aligning the pin contacts into proper position within the plug. One (1) wedge is required per plug housing to complete the assembly. The 8-way receptacle wedge can be used with the standard 8-way receptacle or the strain relief 8-way receptacle.

AT Series receptacle housings are considered to be the female end sealed connector of the AT series connector setup. The housings are made from a thermoplastic material that is durable and UV-resistant. Each receptacle includes a silicone elastomer wire seal to help prevent environmental ingress.

This is a 25 Amp auto reset metal circuit breaker with a parallel mounting bracket. It is auto reset, providing continued operation during an overcurrent condition in DC applications. It is commonly referred to as a type 1 breaker and can be used in many diverse applications including multiple power outlet strips, trucks, buses, portable generators, welding equipment and trolling motors.

This 6" Oval Stop/Turn/Tail Light comes with a sealed lens and housing style. It also fits into oval grommet. 12 Volts