Quick Cable

Set up your truck so you never have to open your hood for a jump start again. Quick-connect plugs make your job easier, and extended cable combinations give you extra length when needed. Choose the cable type, the gauge you prefer and the length of the cables to suit your specific needs. Heavy-duty construction is ideal for equipping your service vehicle or tow truck. Fine-stranded copper conductor provides maximum conductivity and flexibility. Parallel-bonded cables (except 1/0) resist tangling and remain flexible in cold weather.

The Quick Cable Plug-to-Plug cables are perfect for equipping service vehicles and tow trucks. These cables feature fine stranded copper conductors for maximum conductivity and flexibility. Parallel bonded (except in the 1/0) help resist tangling in the cables and also increase flexibility in cold weather. These cables are designed with heavy duty construction to ensure longevity.

Absorber/neutralizer changes color from purple to yellow to show when acid is neutralized and safe for disposal. Clean-up instructions included inside the lid.

Permanently install 5'L plug-to-lug cable in your vehicle to save time during jump starts while protecting your battery from the elements. Use in combination with Plug-to-Plug or Clamp-to-Plug cables (sold separately). Heavy-duty construction survives rigorous use on service vehicles and tow trucks.

These jump-packs contain batteries that must be fully charged prior to use. All jump-packs have built-in overcharge protection when plugged into 120 VAC outlet. This portable power pack is 12V with a dual 20Ah AGM battery. It features 700 cranking amps with peak amps of 1500. It has 2 gauge 62" long copper cables, parrot clamps and a reverse polarity alarm. This jump pack has a built-in work light and flasher making it the perfect pack at a recovery scene.

The Rescue 2100 is a second generation dual voltage portable power pack that uses advanced technology microprocessor controls to offer a level of safety and performance that is unique in the industry. The advanced analytical display on the membrane panel provides user feedback on the state of the external battery to be jump started as well as the batteries inside the Rescue 2100. Quick Cable's exclusive voltage and polarity protection prevents the unit from engaging when the unit is connected incorrectly, either through reversed polarity, or incorrect voltage setting. The Rescue 2100 can also be used in very low voltage situations or as a power source for 12V or 24V equipment without the polarity and voltage protection features. An all-new digital battery meter displays both internal and external battery voltage, and indicates recharging and fully-charged internal batteries. LED's signal system voltage selection, low internal battery voltage, low voltage situations and reversed polarity. A 12V cigarette-style power outlet protected by an internally-resetting 15 amp circuit breaker, and a USBr charging port are both provided. A selectable worklight/safety flasher is built in. Like all Rescue portable power packs, the 2100 comes with a built-in battery charger. The 62" booster cables are all-copper welding cable to stay flexible even in subzero temperatures and feature heavy duty parrot clamps. With 900/1600 peak amps at 12V, the 2100 offers commercial-grade power for cars, trucks and commercial equipment in a hand-carried package.

The Quick Cable iQ4 lithium jump pack delivers optimal battery charge for all lead acid type batteries including SLA, AGM, gel cell, and standard/deep cycle batteries. These lithium jump packs include multiple programmable modes and make sure your battery is charged.

This battery carrier features an economical design to easily transport most battery types.

Replace weakened clamps on your booster cables with a pair of heavy-duty mechanic charging clamps from QuickCable. Rated for 12V, 400A applications, the handles are color-coded for positive and negative battery connections and are suited nicely for larger battery chargers and jump starters.

Tests for 6, 12, or 24V presence. Screw cap protects insulation probe. Chrome plated solid brass body.

Provides reliable jump-starting without draining your vehicle battery. This pack is ideal for cars and trucks with its 400 cold cranking amps. The built-in work light helps you see better in low-light situations and the polarity warning light helps prevent incorrect connections. 55" 6G cables give you plenty of length for easy access. Overcharge protection provided by a built-in float charger. Additional features include: On/Off switch, DC outlet, voltmeter, LED Indicator light, test switch, one internal battery and polarity warning light with sound.

This unit has a range of 4.99-19.99 volts and can test 6 or 12 volt batteries. It has an automatic polarity protection to prevent crossing up and potentially destroying the electronic equipment.

The Quick Cable ECM/ECU/PCM Memory Saver Cable (OBD II) with a power pack to prevent the loss of memory in a vehicles computer when the battery is disconnected.

Quick Cable Standard Battery Boxes fits all traditional battery group sizes including the all new orbital or spiral celled, deep cycle, high performance batteries. This product is impervious to acid, gasoline, oil and solvents. Rust proof and UV protected.

Compression-nut connector can be sealed with a standard wrench, no crimper required.

This in-cab jump pack charging cord from Rescue saves time by letting you recharge your jump packs right inside your roadside service vehicle. The current limiter protects from circuit overload and works with the 12V cigarette plug. The unit supplies plenty of power to recharge the battery pack but not enough to damage the vehicle.

The Quick Cable iQ2 lithium jump pack delivers optimal battery charge for all lead acid type batteries including SLA, AGM, gel cell, and standard/deep cycle batteries. These lithium jump packs include multiple programmable modes and make sure your battery is charged.

The iStart Portable Power Pack is a lightweight, convenient power source to provide jump starting power for cars, light trucks, ATV s, boats, and lawn and garden equipment. It also works as a lantern and offers a 12V cigarette style power outlet to recharge or power small electronic gear like cell phones and music players. A built-in polarity alarm sounds a continuous tone and triggers an LED if positive and negative connections are reversed. LED status lights indicate reserve power and charging status.

This battery carrier features an economical design to easily transport most battery types.

This no-frills pack provides reliable jump-starting without draining your vehicle battery. Ideal for cars and trucks with its 400 cold cranking amps. 6G, 27" 100% copper cables perform well in varying conditions. Additional features include: On/Off switch, DC outlet, voltmeter, LED Indicator light, test switch and one internal battery.

A must for every tool box! This quick cutter features resharpenable blades made of 1075 carbon steel hardened for long life.

Includes a brush to clean post terminals, side terminals and any small crevices on the battery.

This battery carrier features an economical design to easily transport most battery types.

Non-conductive to eliminate hold-down as source of shorts. Adjustable and lockable. Fits existing hardware or select from hold-down bolts and Group 24 or 27 vinyl coated trays. Ideal for all applications.

Long thread accommodates all crossbar/ frame designs including QuickHold products. Use with battery trays. "J" style bend eliminates any need to shift or remove battery. Sold as pair - hardware included.

These Pliers from Quick Cable have a off-set nose designed for close quarter work. The narrow jaw securely grips corroded hardware.

Cables are designed with a standard 3/8" stud hole and are built with copper conductors for maximum conductivity. Option of 30" or 40" cable.

Quick Cable Heavy Wall Copper Lug is made of die-cast copper alloy and tin-plated for solid conductivity and corrosion resistance.

Non-conductive to eliminate hold-down as source of shorts. Adjustable and lockable. Fits existing hardware or select from hold-down bolts and Group 24 or 27 vinyl coated trays. Ideal for all applications.

This battery hold down set features long threads for use with battery trays to accommodate all crossbar/frame designs including Quick Hold products. Sold as a pair with hardware included.

The Quick Cable ECM/ECU/PCM Memory Saver Cable (Pre OBD II) with a power pack to prevent the loss of memory in a vehicles computer when disconnecting the battery.

Cables are 4 gauge with a standard 3/8" stud hole. Antimonial lead connectors resist corrosion, die cast process seals copper wire from acid fumes and corrosive salts. The tinning of copper wire before casting ensures durable bond between the wire and connector.

Quick Cables Top Post Universal Neg/Pos Straight clamp for added conductivity. Made of die-cast copper alloy, tin-plated for solid conductivity and corrosion resistance. Easy read gauge, and polarity stamp. Lead free and conductivity fasteners included.

Cables are 4 gauge with a standard 3/8" stud hole. Antimonial lead connectors resist corrosion, die cast process seals copper wire from acid fumes and corrosive salts. The tinning of copper wire before casting ensures durable bond between the wire and connector.

Compression-nut connector can be sealed with a standard wrench, no crimper required.

This battery carrier features an economical design to easily transport most battery types.

These lead-free compression clamps are ideal for field repairs. Includes fasteners.