SnowDogg

This is a SnowDogg driver side or passenger side light housing.

This is a spring cage connector, it comes in a kit of two.

This replacement Center Cutting Edge DS from Buyers Products is used on the Moldboard assembly of VMD75/VMD75II, VXF85/VXF85II and VXF95/VXF95II Snow V-Plows.

Note: Special Handling Fees Apply for Specific Items

These SnowDogg Deflectors from Buyers Products are an essential safety accessory for snow plows. Deflectors control the snow spray from hitting the driver's windshield. They also allow for a higher speed of travel and they efficiently stack the snow. Choose your side and model and get your deflectors ordered today!

• Choose Drivers or Passenger Side
• Choose your snow plow model

This is a SnowDogg headlight adaptor, H1 3/9008.

Please Note: Product Discontinued - ALL SALES FINAL!

SnowDogg small (x20) spring cage kit.

This Side Winding Universal Jack from SnowDogg is used on the Moldboard Assembly of several of their snow plows. These include CM, HD/EX, MD, TE, VMD, VXF, SKTE and XP Series Plows.

This is a SnowDogg hardware kit, cutting edge.

This is a SnowDogg shoe kit.

This is a replacement Cutting Edge for the VX Series snow plows by Buyers Products. (Snow plow not included) (This Product is sold as each not as a pair)

This is a replacement Cap Harness for SnowDogg.

This is a replacement plow control.

This Repair Connector is for the Truck Control Harness 16160300.

Replacement driver side or passenger side plow light. Part of Light Kit number S D16160700.

This is a SnowDogg headlight adapter, Hb3/Hb4-9005/06. This adapter has 2 wires per plug and 2 plugs per side for separate low and high beam headlights with replicable bulb type.

This is a SnowDogg plow weather protect plug.

This is a SnowDogg headlight adapter for Gm/Chevy 1500 (2007-2013) And 2500/3500 (2007-2014) The models these adapters work with are GMC/Silverado 1500/2500/3500.

Buyers Products SnowDogg Illuminator LED Plow Lights are strong enough to punch through dark nights and blinding blizzards. Full LED power is over twice as bright as traditional halogens and lasts longer, providing years of light without having to change a bulb. Active Defrosting Technology keeps the lights from icing up as the temperatures drop, and since the whole lens is heated evenly it prevents the banding and streaking common in other LED plow lights. This means 100% of the Illuminator's light shines through.

This is a SnowDogg relay for HPU motor, HT300/HV600.

Note: Special Handling Fees Apply for Specific Items

This is a replacement cutting edge.

• Works with MD, EX, and CM Series

These are replacement polymer snow deflectors by Buyers Products.

This is a SnowDogg Connector, Repair.

The SnowDogg truckside kit includes the wiring harness and solenoid for the truck and fits all Gen2 models. The truckside kit plugs into the plowside harness.

This is a SnowDogg light kit, pair.

This is a SnowDogg headlight adapter, HB5/9007.

This is a SnowDogg truck mount bracket, 1999 - 2006 Chevrolet/GMC 2500/3500; 2007 Chevrolet/GMC 2500/3500 classic; 2007 - 2009 Chevrolet/GMC Yukon, Suburban, Avalanche, or Tahoe 2500 series; 2007 - 2009 Chevrolet/GMC 2500/3500 (New Body Style)

This is a SnowDogg cylinder lift, 2" x 6".

This is a SnowDogg V-Plow harness, HPU.

SnowDogg truck light relay harness.

This is a SnowDogg snapper pin, prop stand lock, VX.

This is a Replacement Controller from Buyers Products.

This is a replacement controller for HD, EX, CM, MD and TE Plows.

This is a SnowDogg thumb screw, HV.

This is a SnowDogg plow shoe assembly, MD.

This is a truck mount bracket, 2008 - 2009 Ford F250, F350, F450, F550; with HD, EX, VX, CM series SnowDogg snowplow.

This SnowDogg Mount fits on 1999-2007 Ford F250-550 trucks.

This is a SnowDogg 10v coil, SA/SB/SC, HT300.

This is a SnowDogg reservoir kit, HT300/HV600.

This is a SnowDogg strainer, inlet, for HT300/HV600.

This is a SnowDogg hose, angle and it measures 3/8 x 36.

These are SnowDogg blade guide kits.

This is a SnowDogg hardware kit for mounting one light to the headlight bracket. To mount both headlight housings to the mount bracket you will need 2 of these hardware kits. This hardware kit includes (2) caps, (4) spacers, (4) washers, (2) bolts and (4) nuts. This hardware kit is used on all SnowDogg Snow Plows. Use this hardware kit if your bolts in your headlight housing are damaged and need to be replaced.

This Headlight Adaptor is for GM/Chevy 1500 (2014-2015), 2500/3500 (2015-2020). Works for GMC/Silverado 1500/2500/3500.

This is a replacement O-ring seal kit for the hydraulic reservoir tank on the SnowDogg Plows by Buyers Products.

Buyers SnowDogg v-plow g2 controller.

This is a SnowDogg linkage pedal D2Tm, MD/VMD.

This is a SnowDogg hose, lift and it measures 1/4 x 18.

This is a SnowDogg cylinder, angle. This cylinder measures 1-1/2 x 12.

This 2-Way Solenoid Valve from Buyers Products is normally closed.

SnowDogg VXFII Series Liftframe pairs with other series components to create a full snow plow. For 2020 to 2023.

This is a SnowDogg headlight adapter, Hb2/2B/2D. This adapter has 3 wires for a sealed beam headlight that has low and high beam together.

This SnowDogg truck mount fits on GM 1500 Classic model years 1999 to 2007. It is to be used with SnowDogg MD/MDII and VMD/VMDII Snowplows.

This is a SnowDogg cutting edge back drag blade, MD75/MD75II, HD75/HD75II and EX75/EX75II series

This is a SnowDogg clevis pin kit, it measures 7/8" x 3-1/4", with hardware.

This is a SnowDogg hardware kit for mounting one light to the headlight bracket. To mount both headlight housings to the mount bracket you will need 2 of these hardware kits. This hardware kit includes (2) caps, (2) spacers, (2) washers and (4) nuts. This hardware kit is used on all SnowDogg Snow Plows.

This SnowDogg replacement Snowplow Headlight Adapter is for use with a HB3 and HB4 1999-2002 GM Truck.

Buyers SnowDogg controller, straight blade G2.

This is a SnowDogg cylinder, angle. This cylinder measures 1-1/2 x 1-3/4 x 12 DA.

This Size 8 Coil from Buyers Products comes with flying leads and is used as a replacement part on VXF/VMD HPU. These are used on VMD75 V-Plows, VXF85 and VXF95 V-Plows, and XP810 Plows.