Western

This is a SnowDogg shoe assembly, standard western with washers and pin.

This is a Western replacement snow plow controller. Can choose from a straight blade snow plow, v-plow or wide-out plow controller. S.A.M.

SAM 9foot Control Cables fit Western Snow Plows.

This product is a replacement controller for Western / Fisher. S.A.M.

Western Sling 2-leg clevis master set

Note: Special Handling Fees Apply for Specific Items

Back drag straight blade comes in the following sizes :7 1/2'ft, 8ft, 8 1/2'ft, and 9ft.This will improve the stock straight edge back dragging as the cutting edge is designed for back dragging a cleaner scrape to the surface that is being plowed. Made from 1/4 inch abrasion-resistant steel and custom fit to your blade. Angled to maximize back dragging. Easy to install and easy to use, a back drag edge is a key tool in any snowfighter's kit. This cutting edge is installed with the stock bolts from the main cutting edge. You can reuse the bolts that come on your snowplow if they are not damaged. The Back-Drag Cutting Edge is Installed on the back of the moldboard to the base angle where the main cutting edge is bolted to. S.A.M.

• Length: 7 1/2', 8', 8 1/2', and 9'
• Ultramount 2 Pro Plow 2
• Ultramount Pro Plus
• Ultramount 2 Pro Plus
• Snowex/Blizzard
• Western
• Sold as each

Buyers Products Emergency Repair Kit for SnowDoggr Straight Blade Snow Plows includes parts needed to complete many common street-side repairs. S.A.M.

Western stand plunger assembly with spring. S.A.M.

This is a replacement Western plow lift arm. S.A.M.

We have the truck and trailer parts to keep your fleet on the move. Take a look at the features for Buyers Products Harness. Fits Brand: Western, Fisher. S.A.M.

This product is a replacement cartridge 40 with nut that is designed for use with the Fisher HT/Western HTS Hydraulic Units. S.A.M.

This is a replacment Western shock absorber. S.A.M.

This is a replacment Western angle hose kit. S.A.M.

Western Plow Part # 43304 ? Lift Arm Kit is found on all newer Western UltraMount2 snow plows and is what your plow chain attaches t o on the top portion of your plow. This lift arm kit, part # 43304 includes (1) lift arm, (1) 3/4 x 3-1/2 clevis pin, (6) 3/4 in. fl at washers, (1) 5/32 x 1-1/2 cotter pin package of 4, (2) UHMW round flat washer, and (2) 3/4 x 2 clevis pin kit. S.A.M.

This is a replacment Western 4-1/2" replacment for old style motors 4' & 4-1/2". S.A.M.

This is a replacment Western pivot bar kit. S.A.M.

This is a replacment Western cylinder angle 2" x 10" double acting. S.A.M.

This is a replacment Western cylinder angle 2" x 11" double acting. S.A.M.

This is a replacement Western rubber cutting edges 1-1/2" x 8" x 84", 7". S.A.M.

This is a replacment Western A-frames & quadrents A-frame for standard plow. S.A.M.

This is a replacment Western A-frame & quadrants A-frame for pro plow. S.A.M.

This is a replacement Western A-frames & sectors old style sector for 8' plow. S.A.M.

This is a replacement Western A-frame & quadrant for pro plow. S.A.M.

This is a replacment Western A-frame & quadrants for standard plow. S.A.M.

High Pressure hose 1/4" x 38" ( bulk 100) S.A.M.

SAM Pivot pin replacement for Western Snow Plow.

SAM Angle and Lift Cylinders to fit Western Snow Plows are similar to Western.

This is a Western linch pin. S.A.M.

This is a replacment Western motor gasket for 4-1/2" style motor. S.A.M.

This is a replacment Western flare (male) to 1/4" NPTF (male) Union. S.A.M.

This is a replacment Western elbow kit 90 degrees - 6M o-ring S.A.M.

This is a replacement Western shoe spacer 1-1/2" long. S.A.M.

This is a replacment Western cap screw. S.A.M.

This is a replacment Western long elbow kit 90 degrees - 6M o-ring. S.A.M.

This is a replacment Western street elbow 1/4" x 90 degrees. S.A.M.

This is a replacment Western street elbow 1/4" x 90 degrees (Special). S.A.M.

This is a replacement Western male elbow 1/4" x 90 degrees (Special). S.A.M.

This is a Western stand lock pin. S.A.M.

This is a replacment Meyer/Diamond packing nut 2" ram. S.A.M.

This is a replacment Western cap screw. S.A.M.

This is a replacement Western power cable 22" or 60" and comes in red or black. S.A.M.

This is a Western base lug 3/4" hole w/o-ring. S.A.M.

This is a replacment Western motor solenoid. S.A.M.

This is a Western hydraulic hose 1/4" x 38'. S.A.M.

This is a replacment Western packing set 2". S.A.M.

This is a replacment Western packing nut 1-1/2" part #1305210. S.A.M.

This is a replacment Western packing nut 1-1/2". S.A.M.

This is a Western trip spring. S.A.M.

This is a replacment Western hardware kit. S.A.M.

This is a replacment Western unltra mount plow stand w/pin. S.A.M.

This is a replacment Western uni-mount plow stand. S.A.M.