Zips

Zip?s Endless Round Slings feature a Safety Factor of 5:1. The inner core is made from high-tensile polyester fiber to provide the maximum possible strength. Each sling is color coded according to capacity. See drop down menu for available lengths. See chart for sling capacity.

Zip's-Branded Rubber Mud Flaps

Zip's Wheel Lift Strap with a D-Ring is perfect for securing vehicles on a wheel lift of a tow truck. This durable strap is available in six lengths and features abrasion-resistant webbing. This strap has a width of 2" and can be used in many other securement applications.

Zip's snatch blocks with a swivel shackle and 30 inches of chain provide versatility for tow operators at a recovery scene. The combination chain, snatch block and grab hook help change the direction of the tow or gain an advantage over the disabled vehicle. See the drop-down menu for available sizes and working load limits.

Zip's 8 Point Tie-Down Kit with Chains includes four (4) winch straps with 12" chain ends, four (4) standard ratchets with chain ends and four (4) dogbone straps to secure most vehicles to a car carrier flat deck. The webbing is abrasion resistant, and the heavy-duty hardware holds up to repeated use. Choose from two lengths.

These Galvanized Toolbox Mounting Bracket easily mounts toolboxes on rollbacks or carriers. It is used for 20" or 24" deep underbody toolboxes on car carrier beds. Sold as a pair.

Zip's Custom Toolbox Sliding Drawer System is a great way to maximize the dead space in your toolboxes on your Tow Trucks, Wreckers, and Car Carriers. These Sliding Aluminum Drawer Systems are a great way to store tools that you use on a regular basis at a recovery scene. These Aluminum Drawer Systems are bolt in ready and include mounting brackets. However this system doesn't include any mounting hardware (nuts and bolts). The mount angles are made from high quality .125" thick steel. These sliding aluminum drawer systems not only maximize your toolbox storage space, but also offer a custom look to the inside of your toolbox while on a recovery scene.

Zip's high-quality, low-cost snatch blocks are available in four rope sizes with working load limits up to 30,000 lbs. These blocks also feature a spring-loaded latch that adds a layer of safety to the recovery scene. See the drop-down menu for available sizes and working load limits.

Note: Special Handling Fees Apply for Specific Items<br //><br //>Easily mount toolboxes on rollbacks or carriers. Used for 24" X 24" toolboxes on car carrier beds. <br //> <br //>

• 24"X24" or 24"X30"
• Pre drilled holes
• Sturdy steel angle iron
• Sold as each <br //> <br //> <span style="font-size: 18px;"/>Available in the following sizes <br //> <br //> <table style="undefined;table-layout: fixed; width: 434px;"/> <colgroup/> <col style="width: 65.88889px;" //> <col style="width: 72.88889px;" //> <col style="width: 186.88889px;" //> </colgroup/> <thead/> <tr/> <th/>Item #</th/> <th/>Size</th/> <th/>Finish</th/> </tr/> </thead/> <tbody/> <tr/> <td/>LR-2G</td/> <td/>24" x 24"</td/> <td/>Galvanized</td/> </tr/> <tr/> <td/>LR-5</td/> <td/>24" x 24"</td/> <td/>Powder Coated Black</td/> </tr/> <tr/> <td/>LR-5TG</td/> <td/>24" X 30"</td/> <td/>Tall Galvanized</td/> </tr/> <tr/> <td/>LR-5T</td/> <td/>24" X 30"</td/> <td/>Tall Powder Coated Black</td/> </tr/> </tbody/> </table/> <style/> th, td { padding-right: 20px; } .product-table-top { display: block; max-width: -moz-fit-content; max-width: fit-content; overflow-x: auto; white-space: nowrap; } </style/>

Zip?s J-chain assemblies include a 15? J hook on one end of the Grade 70 5/16? chain and a mini J hook and grab hook cluster on the other end. Choose from four lengths:

Easily mount toolboxes on rollbacks or carriers. Used for underbody toolboxes on car carrier beds.

Zip's Eye/Eye Round Slings feature a Safety Factor of 5:1. The inner core is made from high-tensile polyester fiber to provide the maximum possible strength. Each sling is color coded according to capacity. See drop down menu for available lengths. See chart for sling capacity.

Protect your equipment from wind and weather with the Turbo Saver. High speed winds can cause the turbo blades to spin and, due to a lack of lubrication, the bearings can be ruined. With the Turbo Saver the wind cannot turn the turbo. The Turbo Saver eliminates the need to use duct tape or rags in the exhaust pipe and is reusable. The Turbo Saver Exhaust Cover is great for transporting equipment.

Zip?s V-chain assemblies include a R, T and Mini-J hook cluster with a pear link and grab hook at the center. The Grade 70 5/16? cha in is available in 3ft length with a working load limit of 5,400 lbs. at a 60-degree angle. The pear link provides a dedicated pull point.

Zip's Tie-Down with D-Ring measure 84" long and includes a standard ratchet with a finger hook. The webbing is abrasion resistant, and the heavy-duty hardware holds up to repeated use.

Zip's J-chain assemblies include a 15" J hook on one end of the Grade 70 5/16" chain and a hammerhead T/J and grab hook cluster on the other end. Choose from three lengths.

Note: Special Handling Fees Apply for Specific Items

Zip's Custom Broom or Shovel Holders are constructed of Steel and can be painted black or galvanized. These brackets are designed to be installed along side the control compartments of a Miller Industries LCG 12 & 16 Series or 10 Series Car Carriers. They simply bolt to the bottom side of the car carrier sub-frame. A threaded T-handle screws down to hold the broom or shovel securely in place. The 12 & 16 Series custom holder measures 37.5" between the brackets. The 10 Series custom holder measures 33.5" between the brackets. These holders require you to drill through the subframe to install the brackets.

• Custom built by Zip's
• Choose between the 12 & 16 Series or 10 Series Car Carrier
• Available in Galvanized or Painted finish
• Single or Dual square tubing
• Underside mount
• Subframe drilling required
• Additional Aluminum Mounting Plate not included in kit

Available in the following sizes

Item #	Size	Finish
ZP-CBSH-HOLDER	Single - 10 Series	Painted
ZP-CBSH-10S-DUAL-G	Dual - 10 Series	Galvanized
ZP-CBSH-10S-DUAL	Dual - 10 Series	Painted
ZP-CBSH-LCG-G	Single - 12 and 16 Series	Galvanized
ZP-CBSH-LCG	Single - 12 and 16 Series	Painted
ZP-CBSH-LCG-DUAL-G	Dual - 12 and 16 Series	Galvanized
ZP-CBSH-LCG-DUAL	Dual - 12 and 16 Series	Painted

Zip?s V-chain assemblies include a 15? J hook with a pear link and grab hook at the center. The Grade 70 5/16? chain is available in two leg lengths with a working load limit of 5,400 lbs. at a 60-degree angle. The pear link provides a dedicated pull point. The larger J hook enables quick hook up to a vehicle?s rims.

This Zip's 18" rough surface broom has a durable fiberglass handle. It sweeps heavy debris such as: gravel, mulch and heavy dirt. This broom effectively cleans rough surfaces. It is for outdoor use under wet or dry conditions.

When recovering a vehicle with a car carrier rollback, the Zip's Side Puller Recovery Tool allows your truck to remain parallel with the road and keeps traffic flowing, taking up less roadway with winch angles off the rear of the deck. The Zip's Side Puller Recovery Tool has a unique design that allows the operator quick and easy usage - no installation labor required! It can be locked into position utilizing the standard key slot holes along the rear approach plate on all Miller Industries 10, 12 and 16 Series STEEL car carriers. It is secured in place with a hitch pin and hairpin cotter pin.

Zip's Replacement Tie-Down Straps with Mini J, R, and T Hooks feature abrasion-resistant webbing. Choose from four lengths.

Zip's Emergency Warning Triangle Kit is DOT-compliant and warns approaching traffic of a disabled commercial vehicle along the side of a road. The three triangles unfold and snap together, and the weighted base ensures they will stay put in most roadside conditions.

Zip?s V-chain assemblies include a 15" J hook and a mini J hook cluster with a pear link and grab hook at the center. The Grade 70 5/16? chain is available in two leg lengths with a working load limit of 5,400 lbs. at a 60-degree angle. The pear link provides a dedicated pull point. The larger J hook enables quick hook up to a vehicle's rims.

<font size=4/>Available in the following sizes</font/>




<table style="undefined;table-layout: fixed; width: 435px"/>
<colgroup/>
<col style="width: 73.88889px"/>
<col style="width: 72.88889px"/>
<col style="width: 187.88889px"/>
</colgroup/>
<thead/>
  <tr/>
    <th/>Item #</th/>
    <th/>Size</th/>
    <th/>Finish</th/>
  </tr/>
</thead/>
<tbody/>
  <tr/>
    <td/>LR-6G</td/>
    <td/>20" X 24"</td/>
    <td/>Galvanized</td/>
  </tr/>
  <tr/>
    <td/>LR-6</td/>
    <td/>20" X 24"</td/>
    <td/>Powder Coated Black</td/>
  </tr/>
  <tr/>
    <td/>LR-6TG</td/>
    <td/>24" x 24"</td/>
    <td/>Tall Galvanized</td/>
  </tr/>
  <tr/>
    <td/>LR-6T</td/>
    <td/>24" x 24"</td/>
    <td/>Tall Powder Coated Black</td/>
  </tr/>
</tbody/>
</table/>
<style/>
    th, td {
    padding-right: 20px;
    }
    .product-table-top {
    display: block;
    max-width: -moz-fit-content;
    max-width: fit-content;
    overflow-x: auto;
    white-space: nowrap;
    }
</style/>
 

These Zips 2" tie-down straps come with a flat snap hook attached at one end of each. A cordura sleeve provides added protection on each strap. These straps are commonly used on Dynamic Tow Trucks. Wheel Lift Straps are perfect for securing vehicles tires to any wheel lift.