0 Item(s)
You have no items in your shopping cart.
Customers who bought this item also bought
Century Control Handle 8" Blue
This is a replacement control handle for the new Miller Car Carriers. It is
blue in color, and measures 8" long.
$35.99
Century Control Handle 8" Gray
This is a replacement control handle for the new Miller Car Carriers. It is
Gray in color, and measures 8" long.
$35.99
Century Control Handle 8" Red
This is a replacement control handle for the new Miller Car Carriers. It is
Red in color, and measures 8" long.
$35.99
Slip Plate #1 Dry Film Graphite Lubricant
Slip Plate is a heavy duty all purpose dry film graphite lubricant. It will not collect dirt, dust, mud or grit. Bonds quickly to any clean surface, eliminates sticking and material buildup. Will not wash away.
$12.99
–
$151.99
Access Tools Air Wedge
The Air Jack from Access Tools is the industry's best. The bladder is made out
of ballistic nylon, not rubber, which is important because rubber stretches and
nylon doesn't. The Air Wedge is meant for smaller vehicles. A built-in
stiffener further aids insertion by preveting the wedge from bending.
$38.19
Access Tools Store-N-Go Handle Replacement Tips
This 12-count package of replacement long-reach tool tips is a must have item
for any professional. Place a few back-up tips in your Store-N-Go handle and save the rest for future use. Fits most
Access Tools Long-Reach Tools, including the most popular Quick Max.
$8.79
Custer Products Trailer Socket Adapters
These socket and plug adapters will let you change from flat to round wiring
and from 7-way to 4-way function. These adapters are from Custer Products.
Please select which configuration you would like from the drop down above.
$6.99
–
$49.99
AW Direct Elite Series Steel Core Winch Cable
Winch Cables can also be known as: winch line, wire rope, wrecker cables, car carrier cables, and rollback cables. The Elite Series winch cables from AW Direct provide strength and flexibility.
$79.99
–
$131.99
B/A Products 24" Hydraulic Hose Cutter
This 24" Hydraulic Hose Cutter will easily cut through steel braided hydraulic lines, making clean and precise cuts when it does.
$48.99
AW Direct Inflatable Air Wedge
This Inflatable Air Wedge is specially designed to apply slow, damage-free
pressure to create the necessary gap for door tools. Internal stiffener keeps
the bag rigid, making it easy to slide over tight weather stripping. One-hand
push button release valve allows for easy operation.
$26.99
B/A Products G70 Transport Chain Assembly w/ Clevis Grab Hooks
These Grade 70 Binder Safety Chain Assemblies come with a Clevis Grab Hook
attached at each end of the chain. Carrier safety chains can be used as primary
or secondary securement chains on all types of carriers.
$48.99
–
$195.99
JBC Revolution Series Orange Reflective Traffic Cone
JBC Revolution Series Cones are the leader in the traffic safety industry. Revolution Series Cones are made from an innovative injection molded design that holds up in all temperatures and maintains color in difficult UV situations. Indented handles at the top allow the cones to easily be picked up and stacked. The black bases are made entirely from recycled materials and are marked with a unique dotted pattern. Spot the dots to know it's JBC!
$13.99
–
$42.99
B/A Products J Chain 15" J Hook / Grab Hook / Mini J Hook G70
These Grade 70 Chain Assemblies are 5/16" and include a 15" j-hook at one end
and a grab hook and mini j-hook on the other end. The forged, heat treated
steel has excellent wear and abrasion resistance.
$81.99
–
$145.99
B/A Products 5/8" Pretzel Stay Lock Pin
These lock pins are a quick and easy way to set your deck height.
Available in both left- and right-angled pins. Can be used almost anywhere on
your trailer.
$7.99
Maxxima 2" Round Clearance Marker Light w/ 9 LEDs
"LED" represent the cutting edge of lighting technology, LED lights operate on
a totally different concept than traditional incandescent or bulb style lights.
Instead of using a brittle metal filament that is susceptible to road shock and
vibration. LEDs are solid-state devices utilizing an electronic chip that is
encapsulated in an epoxy substrate. This design provides increased durability
and a protective seal from road elements like dirt moisture and other corrosive
agents.
$7.29
AW Direct Air Dryer Connector Assembly
This air connector assembly is designed for endless truck makes and models. Simply remove the OEM air compressor supply line from the air dryer and replace it with this connector - supplying air directly to the system.
$34.99
–
$37.99
AW Direct Air Dryer Connector Assembly
This air connector assembly is designed for endless truck makes and models. Simply remove the OEM air compressor supply line from the air dryer and replace it with this connector - supplying air directly to the system. #10 Female JIC fitting.
$34.99
Zip's Grade 70 Clevis Grab Hook
Grade 70 grab hooks from Zip's include the clevis and cotter pint to attach to your chain. The size and grade are stamped on the hook. See the drop-down menu for available sizes and working load limits.
$4.39
–
$13.99
Zip's Endless Loop Round Slings
Zips Endless Round Slings feature a Safety Factor of 5:1. The inner core is made from high-tensile polyester fiber to provide the maximum possible strength. Each sling is color coded according to capacity. See drop down menu for available lengths. See chart for sling capacity.
$6.99
–
$347.99
Related products
Muncie 15 GPM Pump K Series
MUN PK Series hydraulic pump short front cover. 3.45 ci 7/8" 13 spline shaft SAE "B" flange straight thread side port left hand rotation w/Relief Valve.
$1,167.99
Muncie Pump O'Ring Port 17 GPM 1.5"
This Hydraulic Pump from Muncie has a 17 gallon per minute flow at 1,000 RPM.
The PK Series Pumps from Muncie are designed to meet the application needs of
either a pump or a motor. The all cast iron construction has 4 ports and a
roller bearing design. The pumps bi-rotational feature helps reduce inventory
requirements. It has a 2 bolt mount, 7/8 - 13 spline input shaft and O-ring
ports on the rear and sides of the pump. Sometimes used to replace 12-0306031
Miller car carrier hydraulic pump for increased flow.
$945.99
Miller Fitting Connector 3/8" MJ x 1/2" MB
This Hydraulic Fitting Connector from Miller Industries measures 3/8" MJ x 1/2"
MB. It is used on the Hydraulics Assembly of several Miller Car Carriers. These
Carriers include Century, Challenger, Champion, Holmes, and Vulcan. See the
features below for a full list of carriers and see the brochure tab for
breakdowns.
$3.59
PTO Allison Tee Lube 643 / 2000
Lube "T" fitting - required in the oil return cooling line to supply low
pressure to the idler shaft of the Chelsea PTOs.
$115.99
Pto, Muncie 109%, Sae"B" Flang
This is a Muncie PTO, 109%, dual action air shift with solenoid control, SAE
"B" Flange" typically used on wreckers 50 ton & over and on all rotators.
$4,218.99
Muncie Pto,Hot Shift Rh 117% Allison
This Muncie Hot Shift Power Take Off (PTO) is for installation on Allison 1000
and 2000 Series Automatic Transmissions. The PTO comes with all components
needed for installation. The PTO is set up to accept a directly mounted
hydraulic pump.
$2,888.99
Muncie PTO, 109%, SAE "B" Flange
This is a 109%, SAE "B" flange Muncie PTO with a 4" pilot and 14 T spline.
$4,085.99
Miller Hose Assembly 14"
This 14" Hose Assembly from Miller Industries is used on the Hydraulics
Assembly of several Miller Car Carriers. These include Century, Challenger,
Champion, Holmes, and Vulcan Carriers. See the features below for a full list
of carriers and see the brochure tab for breakdowns.
$30.99
Muncie Hydraulic Pump O Ring Port 15 Gal
This Hydraulic Pump from Muncie has a 15 gallon per minute flow at 1,000 RPM.
The PK Series Pumps from Muncie are designed to meet the application needs of
either a pump or a motor. The all cast iron construction has 4 ports and a
roller bearing design. The pumps bi-rotational feature helps reduce inventory
requirements. It has a 2 bolt mount, 7/8 - 13 spline input shaft and O-ring
ports on the rear and sides of the pump. This pump is used on Miller Car
Carriers 2003 and newer. This pump will also work on a Vulcan 984 also. This part has replaced part number
$937.99
Muncie Pump O-Ring Port 11 Gal
This Hydraulic Pump from Muncie has an 11 gallon per minute flow at 1,000 RPM.
The PK Series Pumps from Muncie are designed to meet the application needs of
either a pump, or a motor. The all cast iron construction has 4 ports and a
roller bearing design. It has a bi-rotational feature that helps reduce
inventory requirements. There is a 2 bolt mount, 7/8"-13 spline input shaft,
and O-Ring ports on the rear and sides of the pump. Use this pump on Miller
Carriers made in 2002 or older.
$912.99
Miller Hose Vulcan 1/4" x 157"
This Hose Assembly from Miller Industries is used on the Wheel Lift Hydraulics
Assembly of Vulcan 810 Intruders and Holmes 440SL Wreckers. The hose is 1/4" x
157" long.
$105.99
Muncie 15 GPM Pump K Series
MUN PK Series hydraulic pump short front cover. 3.45 ci 7/8" 13 spline shaft SAE "B" flange straight thread side port left hand rotation w/Relief Valve.
$1,167.99
Muncie Pump O'Ring Port 17 GPM 1.5"
This Hydraulic Pump from Muncie has a 17 gallon per minute flow at 1,000 RPM.
The PK Series Pumps from Muncie are designed to meet the application needs of
either a pump or a motor. The all cast iron construction has 4 ports and a
roller bearing design. The pumps bi-rotational feature helps reduce inventory
requirements. It has a 2 bolt mount, 7/8 - 13 spline input shaft and O-ring
ports on the rear and sides of the pump. Sometimes used to replace 12-0306031
Miller car carrier hydraulic pump for increased flow.
$945.99
Miller Fitting Connector 3/8" MJ x 1/2" MB
This Hydraulic Fitting Connector from Miller Industries measures 3/8" MJ x 1/2"
MB. It is used on the Hydraulics Assembly of several Miller Car Carriers. These
Carriers include Century, Challenger, Champion, Holmes, and Vulcan. See the
features below for a full list of carriers and see the brochure tab for
breakdowns.
$3.59
PTO Allison Tee Lube 643 / 2000
Lube "T" fitting - required in the oil return cooling line to supply low
pressure to the idler shaft of the Chelsea PTOs.
$115.99
Pto, Muncie 109%, Sae"B" Flang
This is a Muncie PTO, 109%, dual action air shift with solenoid control, SAE
"B" Flange" typically used on wreckers 50 ton & over and on all rotators.
$4,218.99
Muncie Pto,Hot Shift Rh 117% Allison
This Muncie Hot Shift Power Take Off (PTO) is for installation on Allison 1000
and 2000 Series Automatic Transmissions. The PTO comes with all components
needed for installation. The PTO is set up to accept a directly mounted
hydraulic pump.
$2,888.99
Muncie PTO, 109%, SAE "B" Flange
This is a 109%, SAE "B" flange Muncie PTO with a 4" pilot and 14 T spline.
$4,085.99
Miller Hose Assembly 14"
This 14" Hose Assembly from Miller Industries is used on the Hydraulics
Assembly of several Miller Car Carriers. These include Century, Challenger,
Champion, Holmes, and Vulcan Carriers. See the features below for a full list
of carriers and see the brochure tab for breakdowns.
$30.99
Muncie Hydraulic Pump O Ring Port 15 Gal
This Hydraulic Pump from Muncie has a 15 gallon per minute flow at 1,000 RPM.
The PK Series Pumps from Muncie are designed to meet the application needs of
either a pump or a motor. The all cast iron construction has 4 ports and a
roller bearing design. The pumps bi-rotational feature helps reduce inventory
requirements. It has a 2 bolt mount, 7/8 - 13 spline input shaft and O-ring
ports on the rear and sides of the pump. This pump is used on Miller Car
Carriers 2003 and newer. This pump will also work on a Vulcan 984 also. This part has replaced part number
$937.99
Muncie Pump O-Ring Port 11 Gal
This Hydraulic Pump from Muncie has an 11 gallon per minute flow at 1,000 RPM.
The PK Series Pumps from Muncie are designed to meet the application needs of
either a pump, or a motor. The all cast iron construction has 4 ports and a
roller bearing design. It has a bi-rotational feature that helps reduce
inventory requirements. There is a 2 bolt mount, 7/8"-13 spline input shaft,
and O-Ring ports on the rear and sides of the pump. Use this pump on Miller
Carriers made in 2002 or older.
$912.99
Miller Hose Vulcan 1/4" x 157"
This Hose Assembly from Miller Industries is used on the Wheel Lift Hydraulics
Assembly of Vulcan 810 Intruders and Holmes 440SL Wreckers. The hose is 1/4" x
157" long.
$105.99
