Free shipping is only valid on total purchases of $199 or more and ground shipments within the contiguous 48 states for products weighing less than 150 lbs. Special handling fees may be required for some products.Shipping fees will be added for all orders under $199 or that include oversized items or any item of 150 lbs or more. Please contact customer service if you have any questions.
Also known as a wheel grid, slide bar, or receiver, this 3.5" Outer Cross Tube from Miller Industries is a complete right hand assembly with cam lock style plunger pins. This cross tube will fit 3.5" x 3.5" square tubes. It is used on the wheel lift and slide-in tire restraint assembly of Century, Champion, and Vulcan Car Carriers. Shop for the left hand version of this Cross Tube,
This is a replacement nylon wear pad for a 4,000 lb. wheel lift. This wear pad
measures 1/2" x 2" x 4". These wear pads are pre-drilled for easy
installation.
This Pivot Base Straight Control Handle from Miller Industries is used on the 6
and 9 Spool Control Station of Century Generation II 16 Series LCG Car
Carriers. Please see the brochure tab for a list of breakdowns.
The pros know that you don't mess around when it comes to brakes. FVP Brake Cleaner meets or exceeds OE quality with a price so competitive it will stop you in your tracks. FVP Non-Chlorinated Brake Part Cleaner removes oil, grease, brake fluid and containments quickly, with no residue.
This waterproof Flood Light from Buyers Products has 6 white LEDs with a black
powder coated cast aluminum housing. This light is a 12-24 volt system with a
1.5 Amp draw that has an output of 1620 Lumens. Light comes with an adjustable
stainless steel stud mount. The dimensions for this flood light are 5.75" W x
2" T x 3" D and weights around 1.6 lbs.
Temflex vinyl insulating electrical tape. It is flame retardant, lead free,
cold and sunlight resistant, suitable for use at not more than 600V and not
more than 80?C (176?F).
Millennium marker lights are commonly called the Peterbilt
Style. These lights are commonly mounted on the Miller aluminum car carriers
with the removable side rail. These are also applied on wreckers as well.
Fastenal 11.1" 50 lbs. tensile UV black nylon 6.6 Power Phase cable tie.
Cable ties secure wire bundles, harnesses and components quickly without
slipping. Sold Each (Individually)
This Miller Industries product is the left hand side tail light housing for
Century or Vulcan LCG Series Car Carriers (Generation I or II). Its painted
black steel shell houses all the left hand side tail light components, as well
as the face plate. It bolts onto the mounting bracket (12-0710783) which is
attached to the subframe of the carrier. See features for additional
information.
This Miller Industries product is the right hand side tail light housing for Century or Vulcan 10, 15, 20 or 30 Series Car Carriers 2005-Current. Its painted black steel shell houses all the right hand side tail light components, as well as the face plate. It bolts onto the mounting bracket (12-0710783) which is attached to the subframe of the carrier. See features for additional information. This part can be used to replace Part Number 12-0801574.
This is a stainless steel tail light face plate for the left hand side of the
Century Generation II LCG car carriers. The light configuration for this bezel
is horizontal. Does not include lights or back up alarm pictured in photo. All
that is included is the stainless steel face plate.
This Miller Industries product is the left hand side tail light housing for Century or Vulcan 10, 15, 20 or 30 Series Car Carriers 2005-Current. Its painted black steel shell houses all the left hand side tail light components, as well as the face plate. It bolts onto the mounting bracket (12-0710783) which is attached to the subframe of the carrier. See features for additional information. This part can be used to replace Part Number 12-0801573.
This Miller Industries product is the right hand side tail light housing for
Century or Vulcan LCG Series Car Carriers (Generation I or II). Its painted
black steel shell houses all the right hand side tail light components, as well
as the face plate. It bolts onto the mounting bracket (12-0710784) which is
attached to the subframe of the carrier. See features for additional
information.
This is a stainless steel tail light face plate for the right hand side of the
Century Generation II LCG car carriers. The light configuration for this bezel
is horizontal. Does not include lights or license plate mounting hardware as
pictured in photo. All that is included is the stainless steel face plate.
This Miller Industries tail light mounting bracket connects the left hand tail
like housing to the subframe of the car carrier. It is bolt-on and is painted
steel black. It will work for any Century or Vulcan car carrier. See Features
for additional information.
This Miller Industries tail light mounting bracket connects the right hand tail
like housing to the subframe of the car carrier. It is bolt-on and is painted
steel black. It will work for any Century or Vulcan car carrier. See Features
for additional information.
This 4" Round Back Up Alarm from Miller Industries can be installed in the rear
tail light panel of Century, Champion, and Vulcan Car Carriers. Please see the
brochure tab for a list of breakdowns.
This is a Hose Tray used on 21' bed car carriers by Miller Industries.
This hose tray is 9' long x 3.5" wide. The channel where the hose lays in is
2" wide. This hose tray will fit 21' beds from Century, Champion and Vulcan.
See Features Below to see which models it will fit. This part can be used to
replace Part Number 12-0720283. This part will be cut into three sections in
all cases for economical shipment.
Update the wiring for the exterior DOT lighting on your Century car carrier
with this new harness from Miller Industries. Wiring fits up to 21'6" decks.
Replaces 0302217.
This Miller Industries product is the left hand side tail light housing for
Century or Vulcan LCG Series Car Carriers (Generation I or II). Its painted
black steel shell houses all the left hand side tail light components, as well
as the face plate. It bolts onto the mounting bracket (12-0710783) which is
attached to the subframe of the carrier. See features for additional
information.
This Miller Industries product is the right hand side tail light housing for Century or Vulcan 10, 15, 20 or 30 Series Car Carriers 2005-Current. Its painted black steel shell houses all the right hand side tail light components, as well as the face plate. It bolts onto the mounting bracket (12-0710783) which is attached to the subframe of the carrier. See features for additional information. This part can be used to replace Part Number 12-0801574.
This is a stainless steel tail light face plate for the left hand side of the
Century Generation II LCG car carriers. The light configuration for this bezel
is horizontal. Does not include lights or back up alarm pictured in photo. All
that is included is the stainless steel face plate.
This Miller Industries product is the left hand side tail light housing for Century or Vulcan 10, 15, 20 or 30 Series Car Carriers 2005-Current. Its painted black steel shell houses all the left hand side tail light components, as well as the face plate. It bolts onto the mounting bracket (12-0710783) which is attached to the subframe of the carrier. See features for additional information. This part can be used to replace Part Number 12-0801573.
This Miller Industries product is the right hand side tail light housing for
Century or Vulcan LCG Series Car Carriers (Generation I or II). Its painted
black steel shell houses all the right hand side tail light components, as well
as the face plate. It bolts onto the mounting bracket (12-0710784) which is
attached to the subframe of the carrier. See features for additional
information.
This is a stainless steel tail light face plate for the right hand side of the
Century Generation II LCG car carriers. The light configuration for this bezel
is horizontal. Does not include lights or license plate mounting hardware as
pictured in photo. All that is included is the stainless steel face plate.
This Miller Industries tail light mounting bracket connects the left hand tail
like housing to the subframe of the car carrier. It is bolt-on and is painted
steel black. It will work for any Century or Vulcan car carrier. See Features
for additional information.
This Miller Industries tail light mounting bracket connects the right hand tail
like housing to the subframe of the car carrier. It is bolt-on and is painted
steel black. It will work for any Century or Vulcan car carrier. See Features
for additional information.
This 4" Round Back Up Alarm from Miller Industries can be installed in the rear
tail light panel of Century, Champion, and Vulcan Car Carriers. Please see the
brochure tab for a list of breakdowns.
This is a Hose Tray used on 21' bed car carriers by Miller Industries.
This hose tray is 9' long x 3.5" wide. The channel where the hose lays in is
2" wide. This hose tray will fit 21' beds from Century, Champion and Vulcan.
See Features Below to see which models it will fit. This part can be used to
replace Part Number 12-0720283. This part will be cut into three sections in
all cases for economical shipment.
Update the wiring for the exterior DOT lighting on your Century car carrier
with this new harness from Miller Industries. Wiring fits up to 21'6" decks.
Replaces 0302217.