Free shipping is only valid on total purchases of $199 or more and ground shipments within the contiguous 48 states for products weighing less than 150 lbs. Special handling fees may be required for some products.Shipping fees will be added for all orders under $199 or that include oversized items or any item of 150 lbs or more. Please contact customer service if you have any questions.
"LED" represents the cutting edge of lighting technology, LED lights operate on
a totally different concept than traditional incandescent or bulb style lights.
Instead of using a brittle metal filament that is susceptible to road shock and
vibration. LEDs are solid-state devices utilizing an electronic chip that is
encapsulated in an epoxy substrate. This design provides increased durability
and a protective seal from road elements like dirt moisture and other corrosive
agents.
"LED" represent the cutting edge of lighting technology, LED lights operate on
a totally different concept than traditional incandescent or bulb style lights.
Instead of using a brittle metal filament that is susceptible to road shock and
vibration. LEDs are solid-state devices utilizing an electronic chip that is
encapsulated in an epoxy substrate. This design provides increased durability
and a protective seal from road elements like dirt moisture and other corrosive
agents. Available in Amber and Red.
Buyers Products 5 Inch Incandescent Flood Light has a sealed rubber housing and
a blunt cut connection. It sits on a zinc-plated mount and has a 10 in. lead
length. The 35W light is IP67 rated for water and dust resistance.
The pros know that you don't mess around when it comes to brakes. FVP Brake Cleaner meets or exceeds OE quality with a price so competitive it will stop you in your tracks. FVP Non-Chlorinated Brake Part Cleaner removes oil, grease, brake fluid and containments quickly, with no residue.
GoJak Dollies are the solution to your automobile positioning problems. GoJaks operate on the principle of a quick action, bi-directional, double-pawl ratchet. Mechanical leverage applied to the foot pedal progressively "squeezes" the vehicle tire between the rollers until the tire lifts smoothly off the ground. The rollers touch only the tire and no contact is made with the vehicles frame or undercarriage. The low center of gravity after lifting helps make these dollies safe and stable in use. The pure mechanical design
eliminates the need for electric power, compressed air, or slow hydraulics.
Fastenal 11.1" 50 lbs. tensile UV black nylon 6.6 Power Phase cable tie.
Cable ties secure wire bundles, harnesses and components quickly without
slipping. Sold Each (Individually)
Phoenix electrical junction blocks are high-quality, easy-to-use terminal
blocks that allow you to connect multiple electrical sources in your car,
truck, trailer, or RV. They feature a two-piece design and are available with a
range of poles to accommodate a variety of wiring requirements. These blocks
ensure that your wires stay in place and don't contact other leads, keeping all
of your electrical devices organized and safe from short circuiting.
Tomar's RECT-14LS dual channel, ultra high intensity, LED warning light
delivers a huge impact in a small footprint. Dual channels offer independent
function of up to two lamp colors with dozens of user-selectable modes. The
RECT-14LS's compact size makes it the perfect auxiliary light for all the hard
to fit locations. Mount directly to the body, the rearview mirror, grille or
the license plate. A complete line of brackets means you can mount this light
practically anywhere.
This Pivot Pin Kit is for use with Vulcan 804, 831, 860, 870 and 880 Wrecker
Wheel Lifts. This kit also fits all Vulcan Car Carrier Wheel Lifts and
Century/Champion 10 Series Car Carrier Wheel Lifts built in 2002 or newer with
a Vulcan style crossbar. This Kit has a 1-1/4" diameter pivot pin that is held
in place with an allen head bolt and washer on the top.
This Detent Kit from Zip's will help to keep the crossbar straight. It fits
Vulcan style crossbars, Vulcan Car Carrier Wheel Lifts, and Century Car Carrier
Wheel Lifts with Vulcan crossbars. The kit includes a ball, spring, washers,
and a threaded plug.
This Miller Industries product is the left hand side tail light housing for Century or Vulcan 10, 15, 20 or 30 Series Car Carriers 2005-Current. Its painted black steel shell houses all the left hand side tail light components, as well as the face plate. It bolts onto the mounting bracket (12-0710783) which is attached to the subframe of the carrier. See features for additional information. This part can be used to replace Part Number 12-0801573.
This Miller Industries product is the right hand side tail light housing for Century or Vulcan 10, 15, 20 or 30 Series Car Carriers 2005-Current. Its painted black steel shell houses all the right hand side tail light components, as well as the face plate. It bolts onto the mounting bracket (12-0710783) which is attached to the subframe of the carrier. See features for additional information. This part can be used to replace Part Number 12-0801574.
This Miller Industries tail light mounting bracket connects the left hand tail
like housing to the subframe of the car carrier. It is bolt-on and is painted
steel black. It will work for any Century or Vulcan car carrier. See Features
for additional information.
This is a Miller Industries Decal Plate for the driver side control box hood.
It is designed for all Century/Vulcan Car Carriers (Excluding LCG). It labels
all the levers of a 5-spool system.
This is a Miller Industries Control Box hood for the driver side of any
Century/Vulcan Car Carrier prior to 2005 (Excluding LCG). It houses a 5-spool
system and is a steel finish.
This Miller Industries product is the left hand side tail light housing for
Century or Vulcan LCG Series Car Carriers (Generation I or II). Its painted
black steel shell houses all the left hand side tail light components, as well
as the face plate. It bolts onto the mounting bracket (12-0710783) which is
attached to the subframe of the carrier. See features for additional
information.
This Miller Industries product is the right hand side tail light housing for Century or Vulcan 10, 15, 20 or 30 Series Car Carriers 2005-Current. Its painted black steel shell houses all the right hand side tail light components, as well as the face plate. It bolts onto the mounting bracket (12-0710783) which is attached to the subframe of the carrier. See features for additional information. This part can be used to replace Part Number 12-0801574.
This is a stainless steel tail light face plate for the left hand side of the
Century Generation II LCG car carriers. The light configuration for this bezel
is horizontal. Does not include lights or back up alarm pictured in photo. All
that is included is the stainless steel face plate.
This Miller Industries product is the left hand side tail light housing for Century or Vulcan 10, 15, 20 or 30 Series Car Carriers 2005-Current. Its painted black steel shell houses all the left hand side tail light components, as well as the face plate. It bolts onto the mounting bracket (12-0710783) which is attached to the subframe of the carrier. See features for additional information. This part can be used to replace Part Number 12-0801573.
This Miller Industries product is the right hand side tail light housing for
Century or Vulcan LCG Series Car Carriers (Generation I or II). Its painted
black steel shell houses all the right hand side tail light components, as well
as the face plate. It bolts onto the mounting bracket (12-0710784) which is
attached to the subframe of the carrier. See features for additional
information.
This is a stainless steel tail light face plate for the right hand side of the
Century Generation II LCG car carriers. The light configuration for this bezel
is horizontal. Does not include lights or license plate mounting hardware as
pictured in photo. All that is included is the stainless steel face plate.
This Miller Industries tail light mounting bracket connects the left hand tail
like housing to the subframe of the car carrier. It is bolt-on and is painted
steel black. It will work for any Century or Vulcan car carrier. See Features
for additional information.
This Miller Industries tail light mounting bracket connects the right hand tail
like housing to the subframe of the car carrier. It is bolt-on and is painted
steel black. It will work for any Century or Vulcan car carrier. See Features
for additional information.
This 4" Round Back Up Alarm from Miller Industries can be installed in the rear
tail light panel of Century, Champion, and Vulcan Car Carriers. Please see the
brochure tab for a list of breakdowns.
This is a Hose Tray used on 21' bed car carriers by Miller Industries.
This hose tray is 9' long x 3.5" wide. The channel where the hose lays in is
2" wide. This hose tray will fit 21' beds from Century, Champion and Vulcan.
See Features Below to see which models it will fit. This part can be used to
replace Part Number 12-0720283. This part will be cut into three sections in
all cases for economical shipment.
Update the wiring for the exterior DOT lighting on your Century car carrier
with this new harness from Miller Industries. Wiring fits up to 21'6" decks.
Replaces 0302217.
This Miller Industries product is the left hand side tail light housing for
Century or Vulcan LCG Series Car Carriers (Generation I or II). Its painted
black steel shell houses all the left hand side tail light components, as well
as the face plate. It bolts onto the mounting bracket (12-0710783) which is
attached to the subframe of the carrier. See features for additional
information.
This Miller Industries product is the right hand side tail light housing for Century or Vulcan 10, 15, 20 or 30 Series Car Carriers 2005-Current. Its painted black steel shell houses all the right hand side tail light components, as well as the face plate. It bolts onto the mounting bracket (12-0710783) which is attached to the subframe of the carrier. See features for additional information. This part can be used to replace Part Number 12-0801574.
This is a stainless steel tail light face plate for the left hand side of the
Century Generation II LCG car carriers. The light configuration for this bezel
is horizontal. Does not include lights or back up alarm pictured in photo. All
that is included is the stainless steel face plate.
This Miller Industries product is the left hand side tail light housing for Century or Vulcan 10, 15, 20 or 30 Series Car Carriers 2005-Current. Its painted black steel shell houses all the left hand side tail light components, as well as the face plate. It bolts onto the mounting bracket (12-0710783) which is attached to the subframe of the carrier. See features for additional information. This part can be used to replace Part Number 12-0801573.
This Miller Industries product is the right hand side tail light housing for
Century or Vulcan LCG Series Car Carriers (Generation I or II). Its painted
black steel shell houses all the right hand side tail light components, as well
as the face plate. It bolts onto the mounting bracket (12-0710784) which is
attached to the subframe of the carrier. See features for additional
information.
This is a stainless steel tail light face plate for the right hand side of the
Century Generation II LCG car carriers. The light configuration for this bezel
is horizontal. Does not include lights or license plate mounting hardware as
pictured in photo. All that is included is the stainless steel face plate.
This Miller Industries tail light mounting bracket connects the left hand tail
like housing to the subframe of the car carrier. It is bolt-on and is painted
steel black. It will work for any Century or Vulcan car carrier. See Features
for additional information.
This Miller Industries tail light mounting bracket connects the right hand tail
like housing to the subframe of the car carrier. It is bolt-on and is painted
steel black. It will work for any Century or Vulcan car carrier. See Features
for additional information.
This 4" Round Back Up Alarm from Miller Industries can be installed in the rear
tail light panel of Century, Champion, and Vulcan Car Carriers. Please see the
brochure tab for a list of breakdowns.
This is a Hose Tray used on 21' bed car carriers by Miller Industries.
This hose tray is 9' long x 3.5" wide. The channel where the hose lays in is
2" wide. This hose tray will fit 21' beds from Century, Champion and Vulcan.
See Features Below to see which models it will fit. This part can be used to
replace Part Number 12-0720283. This part will be cut into three sections in
all cases for economical shipment.
Update the wiring for the exterior DOT lighting on your Century car carrier
with this new harness from Miller Industries. Wiring fits up to 21'6" decks.
Replaces 0302217.