Free shipping is only valid on total purchases of $199 or more and ground shipments within the contiguous 48 states for products weighing less than 150 lbs. Special handling fees may be required for some products.Shipping fees will be added for all orders under $199 or that include oversized items or any item of 150 lbs or more. Please contact customer service if you have any questions.
"LED" represent the cutting edge of lighting technology, LED lights operate on
a totally different concept than traditional incandescent or bulb style lights.
Instead of using a brittle metal filament that is susceptible to road shock and
vibration. LEDs are solid-state devices utilizing an electronic chip that is
encapsulated in an epoxy substrate. This design provides increased durability
and a protective seal from road elements like dirt moisture and other corrosive
agents.
This is a stainless steel tail light face plate for the right hand side of the
Century Generation II LCG car carriers. The light configuration for this bezel
is horizontal. Does not include lights or license plate mounting hardware as
pictured in photo. All that is included is the stainless steel face plate.
These Hi-Amp Circuit Breakers are ideal for cranes, dump hoists, lift gates,
plows, spreaders, switch panels and power distribution panels. Choose from 50,
80, 100, or 150 Amp Circuit Breakers. These circuit breakers double as a master
disconnect as well. In the event of a "short circuit" the circuit breaker will
"trip" to the off position. Unlike an automatic reset, the manual version stays
open until it is manually reset. By pushing the reset button you can also
disconnect the entire system. This is extremely helpful when servicing the
electrical system.
Trim-Lok's edge trim is flexible Poly Vinyl Chloride (PVC) trim with individual internal metal clips and gripping tongue to provide a stronger grip. As you likely already know, having the right rubber trim for metal edges can make an impact on any project. Whether you run an auto repair shop and need sewable upholstery trim for cars and trucks or manufacture furniture for a living and require decorative trim for your line of products, Trim-Lok manufactures flexible edge trim that can be used in many different industries. As an added bonus, each flexible edging strip purchased from Trim-Lok is manufactured with individual internal metal clips and a gripping tongue. These clips and tongue provide a stronger grip, meaning Trim-Lok's line of edge trim products will last longer than many alternatives available on the market. If you're looking for a flexible metal trim with strong gripping power, excellent resistance to
sunlight, water, and the ozone, and a strong, outer coating material, look no further- build your own edge trim today and see the difference for yourself.
3M Acrylic Foam Tape 4229P is a 0.76mm thick, medium-density, dark grey acrylic foam double sided adhesive tape with high performance acrylic adhesives. Double Sided Acrylic foam adhesive tape is grey with red polyethylene release liner. General purpose double sided adhesive tape with superior adhesive bonding strength for a wide variety of surfaces. Can be used to stick neodymium magnets to non-ferrous material surfaces like plastic, copper, stainless steel, wood, glass, tiles, concrete as these materials does not work directly with magnets. The acrylic foam of 0.76mm thick allows the adhesive to mould to slightly rough surfaces like concrete.
The pros know that you don't mess around when it comes to brakes. FVP Brake Cleaner meets or exceeds OE quality with a price so competitive it will stop you in your tracks. FVP Non-Chlorinated Brake Part Cleaner removes oil, grease, brake fluid and containments quickly, with no residue.
LED Light Strips are ideal for compartment and cargo work spaces of trucks,
trailers, toolboxes, RV's and more. Space saving low profile design is 1/2"
wide and only 0.2" tall. Self adhesive backing for easy installation on any
surface. Includes clips and screws for alternate mounting. IP68 rated
completely sealed waterproof electronics. 12 volt DC.
Temflex vinyl insulating electrical tape. It is flame retardant, lead free,
cold and sunlight resistant, suitable for use at not more than 600V and not
more than 80?C (176?F).
Maxxima M09300 Series of P2PC Combination Mini-Clearance Marker Lights. Each
Light Comes With An Attached Grommet For Quick Mounting. 3 LED Diodes Provide
Superior Light Output Meeting PC Requirements.
"LED" represent the cutting edge of lighting technology, LED lights operate on
a totally different concept than traditional incandescent or bulb style lights.
Instead of using a brittle metal filament that is susceptible to road shock and
vibration. LEDs are solid-state devices utilizing an electronic chip that is
encapsulated in an epoxy substrate. This design provides increased durability
and a protective seal from road elements like dirt moisture and other corrosive
agents.
This Lightning Series equipped with 8mm LED's utilizes Patent Pending lens
technology exclusive to Maxxima. These
extremely cost-effective lights have been specifically designed for Fleets and
OEMs.
This is a 6 LED Rectangular Dual-Voltage Work Light by Maxxima. A stainless
steel bolt and bracket is included. Maxxima's heavy duty work light provides a
400 Lumen super bright flood beam pattern, perfect for all work and equipment
vehicles. Includes 2 blunt cut leads and comes with a 5 year warranty.
Fastenal 11.1" 50 lbs. tensile UV black nylon 6.6 Power Phase cable tie.
Cable ties secure wire bundles, harnesses and components quickly without
slipping. Sold Each (Individually)
This Miller Industries product is the left hand side tail light housing for
Century or Vulcan LCG Series Car Carriers (Generation I or II). Its painted
black steel shell houses all the left hand side tail light components, as well
as the face plate. It bolts onto the mounting bracket (12-0710783) which is
attached to the subframe of the carrier. See features for additional
information.
This is a stainless steel tail light face plate for the left hand side of the
Century Generation II LCG car carriers. The light configuration for this bezel
is horizontal. Does not include lights or back up alarm pictured in photo. All
that is included is the stainless steel face plate.
This Miller Industries product is the right hand side tail light housing for Century or Vulcan 10, 15, 20 or 30 Series Car Carriers 2005-Current. Its painted black steel shell houses all the right hand side tail light components, as well as the face plate. It bolts onto the mounting bracket (12-0710783) which is attached to the subframe of the carrier. See features for additional information. This part can be used to replace Part Number 12-0801574.
This Miller Industries product is the left hand side tail light housing for Century or Vulcan 10, 15, 20 or 30 Series Car Carriers 2005-Current. Its painted black steel shell houses all the left hand side tail light components, as well as the face plate. It bolts onto the mounting bracket (12-0710783) which is attached to the subframe of the carrier. See features for additional information. This part can be used to replace Part Number 12-0801573.
This Miller Industries product is the right hand side tail light housing for
Century or Vulcan LCG Series Car Carriers (Generation I or II). Its painted
black steel shell houses all the right hand side tail light components, as well
as the face plate. It bolts onto the mounting bracket (12-0710784) which is
attached to the subframe of the carrier. See features for additional
information.
This is a stainless steel tail light face plate for the right hand side of the
Century Generation II LCG car carriers. The light configuration for this bezel
is horizontal. Does not include lights or license plate mounting hardware as
pictured in photo. All that is included is the stainless steel face plate.
This Miller Industries tail light mounting bracket connects the left hand tail
like housing to the subframe of the car carrier. It is bolt-on and is painted
steel black. It will work for any Century or Vulcan car carrier. See Features
for additional information.
This Miller Industries tail light mounting bracket connects the right hand tail
like housing to the subframe of the car carrier. It is bolt-on and is painted
steel black. It will work for any Century or Vulcan car carrier. See Features
for additional information.
This 4" Round Back Up Alarm from Miller Industries can be installed in the rear
tail light panel of Century, Champion, and Vulcan Car Carriers. Please see the
brochure tab for a list of breakdowns.
This is a Hose Tray used on 21' bed car carriers by Miller Industries.
This hose tray is 9' long x 3.5" wide. The channel where the hose lays in is
2" wide. This hose tray will fit 21' beds from Century, Champion and Vulcan.
See Features Below to see which models it will fit. This part can be used to
replace Part Number 12-0720283. This part will be cut into three sections in
all cases for economical shipment.
Update the wiring for the exterior DOT lighting on your Century car carrier
with this new harness from Miller Industries. Wiring fits up to 21'6" decks.
Replaces 0302217.
This Miller Industries product is the left hand side tail light housing for
Century or Vulcan LCG Series Car Carriers (Generation I or II). Its painted
black steel shell houses all the left hand side tail light components, as well
as the face plate. It bolts onto the mounting bracket (12-0710783) which is
attached to the subframe of the carrier. See features for additional
information.
This is a stainless steel tail light face plate for the left hand side of the
Century Generation II LCG car carriers. The light configuration for this bezel
is horizontal. Does not include lights or back up alarm pictured in photo. All
that is included is the stainless steel face plate.
This Miller Industries product is the right hand side tail light housing for Century or Vulcan 10, 15, 20 or 30 Series Car Carriers 2005-Current. Its painted black steel shell houses all the right hand side tail light components, as well as the face plate. It bolts onto the mounting bracket (12-0710783) which is attached to the subframe of the carrier. See features for additional information. This part can be used to replace Part Number 12-0801574.
This Miller Industries product is the left hand side tail light housing for Century or Vulcan 10, 15, 20 or 30 Series Car Carriers 2005-Current. Its painted black steel shell houses all the left hand side tail light components, as well as the face plate. It bolts onto the mounting bracket (12-0710783) which is attached to the subframe of the carrier. See features for additional information. This part can be used to replace Part Number 12-0801573.
This Miller Industries product is the right hand side tail light housing for
Century or Vulcan LCG Series Car Carriers (Generation I or II). Its painted
black steel shell houses all the right hand side tail light components, as well
as the face plate. It bolts onto the mounting bracket (12-0710784) which is
attached to the subframe of the carrier. See features for additional
information.
This is a stainless steel tail light face plate for the right hand side of the
Century Generation II LCG car carriers. The light configuration for this bezel
is horizontal. Does not include lights or license plate mounting hardware as
pictured in photo. All that is included is the stainless steel face plate.
This Miller Industries tail light mounting bracket connects the left hand tail
like housing to the subframe of the car carrier. It is bolt-on and is painted
steel black. It will work for any Century or Vulcan car carrier. See Features
for additional information.
This Miller Industries tail light mounting bracket connects the right hand tail
like housing to the subframe of the car carrier. It is bolt-on and is painted
steel black. It will work for any Century or Vulcan car carrier. See Features
for additional information.
This 4" Round Back Up Alarm from Miller Industries can be installed in the rear
tail light panel of Century, Champion, and Vulcan Car Carriers. Please see the
brochure tab for a list of breakdowns.
This is a Hose Tray used on 21' bed car carriers by Miller Industries.
This hose tray is 9' long x 3.5" wide. The channel where the hose lays in is
2" wide. This hose tray will fit 21' beds from Century, Champion and Vulcan.
See Features Below to see which models it will fit. This part can be used to
replace Part Number 12-0720283. This part will be cut into three sections in
all cases for economical shipment.
Update the wiring for the exterior DOT lighting on your Century car carrier
with this new harness from Miller Industries. Wiring fits up to 21'6" decks.
Replaces 0302217.