0 Item(s)
You have no items in your shopping cart.
Customers who bought this item also bought
B/A Products Replacement "Dog Bone" Strap with Sewn Eye Loop
B/a Products replacement "dog bone" strap are featured in many tiedown systems.
These straps feature reinforced eyes and abrasion resistant edged webbing.
$11.99
–
$13.99
Access Tools Super Air Wedge
The Super Air Jack from Access Tools is the industry's best. The bladder is made out
of ballistic nylon, not rubber, which is important because rubber stretches and
nylon doesn't. The air wedge is meant for smaller vehicles. A built-in
stiffener further aids insertion by preventing the wedge from bending.
$42.39
Access Tools Store-N-Go Handle Replacement Tips
This 12-count package of replacement long-reach tool tips is a must have item
for any professional. Place a few back-up tips in your Store-N-Go handle and save the rest for future use. Fits most
Access Tools Long-Reach Tools, including the most popular Quick Max.
$8.79
Collins Dolly Rail Plunger Replacement
This is a replacement rail plunger for aluminum rails from Collins Dolly.
$14.99
Collins Dolly Replacement Flat Rail Spring
This is a replacement compression spring for the dolly rails.
$5.99
Collins Safety Lock Rebuild Kit
This is a dolly safety lock rebuild kit by Collins Manufacturing. This rebuild kit includes the safety lock grease zerk, safety lock roll pin, safety lock spring, safety lock ball, and safety lock handle.
$19.99
New Style Collins SLZ Dolly Ratchet Right Side Assembly
Don't neglect worn or damaged safety ratchets on your Collins SLZ Hi-Speed
Dolly Set. Replace them today with new assemblies from Zip's AW Direct. We
supply zinc-plated replacement ratchets for the left or right side of your
Collins dollies for 2006 and newer models. With spring-assisted lever action,
the safety ratchets keep the dolly's pry bar in check in case it slips or if
you lose your footing on loose gravel or on slippery surfaces. They also allow
for greater mobility in tight spaces and give you peace of mind while towing
down the road.
$71.99
Collins Manufacturing Shoulder Bolt Assembly For Spindle
This is a replacement shoulder bolt assembly for the spindle assembly used on
the Collins Dollies.
$27.99
Carlstar (Carlisle) Replacement Tire Only - 4.80in x 8in
Replacement 4.80-8 C rated tire. Make sure to use steel valve stem and inflate tire to suggested PSI on sidewall to achieve maximum
load rating capacity.
$34.99
In The Ditch 4 Lug Aluminum Wheel Rim
This machined-aluminum wheel is an exclusive design from In The Ditch. The rim is a replacement part for the ITD Speed Dolly and has met all of the DOT requirements.Rim comes with a high pressure valve stem installed.
$74.99
Collins Load Range D 4.80in x 8in - Dolly Tire Only
- Load Range D (992 lbs)
- 4.80 x 8
- Sold as Each
$89.99
Collins Steel Wheel Assembly 5.70in x 8in
This is a replacement painted steel wheel assembly from Collins Manufacturing. This wheel is a 5.70x8 tire with a load range of "D" that is rated at 1070 lbs. This wheel assembly comes with a painted steel rim.
$153.99
Collins Wheel Assembly Dust Cover
This is a replacement dust cover for the wheel assembly on a Collins dolly hub by Collins Manufacturing. This cover keeps all dirt and filth out of the wheel bearing of the dolly wheel.
$13.99
Collins Aluminum Dolly Hub Complete Kit
This is a complete aluminum hub assembly for a Collins Dolly by Collins Manufacturing. This is a 5-lug hub that is made in the USA. This kit includes all races, bearings, spindle nut, washer, cotter pin, grease seal, bolts and dust cover that you will need to complete your hub assembly.
$79.99
Carlstar (Carlisle) All-Purpose Rubber Replacement Tire for Dollies, Trailers, Hand Trucks and Carts
This is an all-purpose rubber replacement tire for Dollies, Trailers, Hand Trucks & Carts. This is the tire only.
$34.99
–
$59.99
Related products
Carlstar (Carlisle) Replacement Tire Only - Load Range D 5.70in x 8in
Replacement 5.70 -8 D rated tire. Make sure to use steel valve stem and inflate tire to suggested PSI on sidewall to achieve maximum load rating capacity.
$79.99
In The Ditch Tire with Aluminum Wheel 5.70in x 8in
This machined aluminum wheel is an exclusive design from In The Ditch. The rim is a replacement part for the ITD Speed Dolly and has met all of the DOT requirements. Rim comes with a high-pressure valve stem installed.
$192.99
Redneck Trailer Bearing Kit for 1" Hub
This bearing kit is for a trailer hub with a diameter of 1". Bearing kit comes complete with bearings, seals, and cotter pins. Each kit does one wheel.
$22.40
Collins Steel Dolly Hub Complete Kit
This is a complete steel hub assembly for a Collins Dolly by Collins Manufacturing. This is a 5-lug hub that is made in the USA. This kit includes all races, bearings, spindle nut, washer, cotter pin, grease seal, and dust cover that you will need to complete your hub assembly.
$69.99
Collins Aluminum Tire and Wheel Assembly Diamond Cut 4.80in x 8in
This is a replacement aluminum wheel assembly from Collins Manufacturing. This wheel is a 4.80 x 8 tire with a load range of "D" that is rated at 992 lbs. This wheel assembly comes with a diamond-cut aluminum rim. The aluminum rim won't rust and will prolong the life of your wheel. This is a good replacement option for your current Collins Dolly set up.
$159.99
In The Ditch Lug Nut Acorn Style Chrome
This Chrome Acorn Style Lug Nut from In The Ditch is for both aluminum and steel wheels.
$2.59
Collins Aluminum Tire and Wheel Assembly 5.70in x 8in
This is a replacement aluminum wheel assembly from Collins Manufacturing. This wheel is a 5.70x8 tire with a load range of "D" that is rated at 1070 lbs. This wheel assembly comes with a diamond-cut finish aluminum rim.
$185.99
Collins Aluminum "C" Tire and Wheel Assembly Diamond Cut 4.80in x 8in
This is a replacement aluminum wheel assembly from Collins Manufacturing. This wheel is a 4.80 x 8 tire with a load range of "C" that is rated at 760 lbs. This wheel assembly comes with a diamond-cut aluminum rim. The aluminum rim won't rust and will prolong the life of your wheel. This is a good replacement option for your current Collins Dolly set up.
$137.99
In The Ditch Wheel Hub Assembly Replacement
Prolong the life of and prevent maintenance issues on your In The Ditch Speed Dolly with this replacement 4 on 4" cast hub and bearing assembly. 1250-lb. capacity when assembled. This hub is for the SLX (Greaseable) style dollies. These are NOT interchangeable with the XL (Sealed Hub) dollies
$61.99
Carlstar (Carlisle) All-Purpose Rubber Replacement Tire for Dollies, Trailers, Hand Trucks and Carts
This is an all-purpose rubber replacement tire for Dollies, Trailers, Hand Trucks & Carts. This is the tire only.
$34.99
–
$59.99
Collins Aluminum Dolly Hub Complete Kit
This is a complete aluminum hub assembly for a Collins Dolly by Collins Manufacturing. This is a 5-lug hub that is made in the USA. This kit includes all races, bearings, spindle nut, washer, cotter pin, grease seal, bolts and dust cover that you will need to complete your hub assembly.
$79.99
In The Ditch Tire with Aluminum Wheel 4.8in x 8in
This machined-aluminum wheel is an exclusive design from In The Ditch. The rim is a replacement part for the ITD Speed Dolly and has met all of the DOT requirements.Rim comes with a high pressure valve stem installed.
$138.99
In The Ditch 4 Lug Aluminum Wheel Rim
This machined-aluminum wheel is an exclusive design from In The Ditch. The rim is a replacement part for the ITD Speed Dolly and has met all of the DOT requirements.Rim comes with a high pressure valve stem installed.
$74.99
Carlstar (Carlisle) Replacement Tire Only - 4.80in x 8in
Replacement 4.80-8 C rated tire. Make sure to use steel valve stem and inflate tire to suggested PSI on sidewall to achieve maximum
load rating capacity.
$34.99
Collins Wheel Assembly Dust Cover
This is a replacement dust cover for the wheel assembly on a Collins dolly hub by Collins Manufacturing. This cover keeps all dirt and filth out of the wheel bearing of the dolly wheel.
$13.99
In the Ditch Towing Sealed Hub Assembly
In The Ditch Towing Products provides a replacement sealed hub assembly.
$67.99
Carlstar (Carlisle) Replacement Tire Only - Load Range D 5.70in x 8in
Replacement 5.70 -8 D rated tire. Make sure to use steel valve stem and inflate tire to suggested PSI on sidewall to achieve maximum load rating capacity.
$79.99
In The Ditch Tire with Aluminum Wheel 5.70in x 8in
This machined aluminum wheel is an exclusive design from In The Ditch. The rim is a replacement part for the ITD Speed Dolly and has met all of the DOT requirements. Rim comes with a high-pressure valve stem installed.
$192.99
Redneck Trailer Bearing Kit for 1" Hub
This bearing kit is for a trailer hub with a diameter of 1". Bearing kit comes complete with bearings, seals, and cotter pins. Each kit does one wheel.
$22.40
Collins Steel Dolly Hub Complete Kit
This is a complete steel hub assembly for a Collins Dolly by Collins Manufacturing. This is a 5-lug hub that is made in the USA. This kit includes all races, bearings, spindle nut, washer, cotter pin, grease seal, and dust cover that you will need to complete your hub assembly.
$69.99
Collins Aluminum Tire and Wheel Assembly Diamond Cut 4.80in x 8in
This is a replacement aluminum wheel assembly from Collins Manufacturing. This wheel is a 4.80 x 8 tire with a load range of "D" that is rated at 992 lbs. This wheel assembly comes with a diamond-cut aluminum rim. The aluminum rim won't rust and will prolong the life of your wheel. This is a good replacement option for your current Collins Dolly set up.
$159.99
In The Ditch Lug Nut Acorn Style Chrome
This Chrome Acorn Style Lug Nut from In The Ditch is for both aluminum and steel wheels.
$2.59
Collins Aluminum Tire and Wheel Assembly 5.70in x 8in
This is a replacement aluminum wheel assembly from Collins Manufacturing. This wheel is a 5.70x8 tire with a load range of "D" that is rated at 1070 lbs. This wheel assembly comes with a diamond-cut finish aluminum rim.
$185.99
Collins Aluminum "C" Tire and Wheel Assembly Diamond Cut 4.80in x 8in
This is a replacement aluminum wheel assembly from Collins Manufacturing. This wheel is a 4.80 x 8 tire with a load range of "C" that is rated at 760 lbs. This wheel assembly comes with a diamond-cut aluminum rim. The aluminum rim won't rust and will prolong the life of your wheel. This is a good replacement option for your current Collins Dolly set up.
$137.99
In The Ditch Wheel Hub Assembly Replacement
Prolong the life of and prevent maintenance issues on your In The Ditch Speed Dolly with this replacement 4 on 4" cast hub and bearing assembly. 1250-lb. capacity when assembled. This hub is for the SLX (Greaseable) style dollies. These are NOT interchangeable with the XL (Sealed Hub) dollies
$61.99
Carlstar (Carlisle) All-Purpose Rubber Replacement Tire for Dollies, Trailers, Hand Trucks and Carts
This is an all-purpose rubber replacement tire for Dollies, Trailers, Hand Trucks & Carts. This is the tire only.
$34.99
–
$59.99
Collins Aluminum Dolly Hub Complete Kit
This is a complete aluminum hub assembly for a Collins Dolly by Collins Manufacturing. This is a 5-lug hub that is made in the USA. This kit includes all races, bearings, spindle nut, washer, cotter pin, grease seal, bolts and dust cover that you will need to complete your hub assembly.
$79.99
In The Ditch Tire with Aluminum Wheel 4.8in x 8in
This machined-aluminum wheel is an exclusive design from In The Ditch. The rim is a replacement part for the ITD Speed Dolly and has met all of the DOT requirements.Rim comes with a high pressure valve stem installed.
$138.99
In The Ditch 4 Lug Aluminum Wheel Rim
This machined-aluminum wheel is an exclusive design from In The Ditch. The rim is a replacement part for the ITD Speed Dolly and has met all of the DOT requirements.Rim comes with a high pressure valve stem installed.
$74.99
Carlstar (Carlisle) Replacement Tire Only - 4.80in x 8in
Replacement 4.80-8 C rated tire. Make sure to use steel valve stem and inflate tire to suggested PSI on sidewall to achieve maximum
load rating capacity.
$34.99
Collins Wheel Assembly Dust Cover
This is a replacement dust cover for the wheel assembly on a Collins dolly hub by Collins Manufacturing. This cover keeps all dirt and filth out of the wheel bearing of the dolly wheel.
$13.99
In the Ditch Towing Sealed Hub Assembly
In The Ditch Towing Products provides a replacement sealed hub assembly.
$67.99
