Collins Manufacturing Corp
Experience the reliability of Collins Manufacturing towing solutions. From Hi-Speed and G7 tow dollies to dolly axles and mounts, we carry everything you need for safe vehicle transport. Shop our selection of Collins dollies and replacement parts to keep your recovery equipment functioning at its best.
Showing 130 items
Your Filters
Clear All
Filter
Sort by
Loading...
Loading...
Collins Wheel Assembly Dust Cover
This is a replacement dust cover for the wheel assembly on a Collins dolly hub by Collins Manufacturing. This cover keeps all dirt and filth out of the wheel bearing of the dolly wheel.
$13.99
Collins Locking Dolly Axle Mounts
This is a locking dolly axle mounting system, by Collins Manufacturing, will ensure safe storage for your cross rails and pry bar. It can be mounted to the deck for easy accessibility. This system allows you to pad lock your axles to prevent theft. These mounts come factory powder coated black.
$139.99
Collins Dolly Replacement Flat Rail Spring
This is a replacement compression spring for the dolly rails.
$5.99
Collins Short Dolly Mounts
These are deck mounted spindle mount brackets for Collins Manufacturing Dollies. These mounts come in 2 different sizes depending on the tire size of your dolly. Please select your tire size from the dropdown menu to select the correct mount you will need for your application. These mounts are sold as pairs.
$199.99
–
$219.99
Collins Load Range D 4.80in x 8in - Dolly Tire Only
- Load Range D (992 lbs)
- 4.80 x 8
- Sold as Each
$89.99
Collins Dolly Rail Plunger Replacement
This is a replacement rail plunger for aluminum rails from Collins Dolly.
$14.99
Collins G7 Hi-Speed Dolly HERO T12 Aluminum Cross Rails, Hubs, Wheels & Pry Bar
When you have a car that just can't keep up, you'll need a dolly that can go the distance. Thanks to its lack of towing distance regulations, you can take a car just about anywhere with the Hero Line Hi-Speed Dolly by Collins. Whether it be down the road or onto the interstate, you can count on this dolly to carry the car.
$2,879.99
–
$2,939.99
Collins Dolly Replacement Wheel Aluminum Slotted Diamond Cut Finish 8" x 3.75" - Wheel Only
Collins Manufacturing aluminum, diamond cut wheel is lightweight and stylish.
$81.99
Collins Steel Dolly Hub Complete Kit
This is a complete steel hub assembly for a Collins Dolly by Collins Manufacturing. This is a 5-lug hub that is made in the USA. This kit includes all races, bearings, spindle nut, washer, cotter pin, grease seal, and dust cover that you will need to complete your hub assembly.
$69.99
Collins Car Carrier Dolly System
The Carrier Dolly System from Collins Manufacturing is a damage free solution to loading car carriers. It helps lift the front of the vehicle to give you more clearance. Or if the vehicle has locked wheels you can roll it up the bed instead of dragging it. The Carrier Dolly also doubles as a motorcycle dolly. Tow cradles sold separately.
$1,499.99
–
$2,599.99
Collins Hi-Speed Dolly (G7) Ratchet Assembly
This is a replacement ratchet assembly for the G7 dollies. See drop-down menu to make sure you get the correct side that you need.
$69.99
Collins Locking Dolly Combination Mount
This is a replacement locking dolly combination mounting brackets by Collins Manufacturing. This mount accommodates your dolly, cross rail (axle), and pry bar (break-over bar).
$359.99
Collins Hi-Speed Dolly Tie Down Straps
These Safety Tie-Down Straps are hook style with ratchet buckles. These are designed for SLX and SLZ Hi-Speed Dollies. These are the replacements for the lasso style tie-down straps (P/N: DF-TDS).
$29.99
Collins Aluminum Pry Bar Rubber Grip
This is the replacement rubber grip for the Collins Pry Bar.
$3.99
Collins Hi-Speed Dolly (G7) Spindle Assembly
This is a replacement spindle assembly for the G7 models.
$129.99
Collins Replacement Cross Rail - G7 Model T12 Axle
Note: Special Handling Fees Apply
This is a replacement aluminum cross rail for the G7 model that measures 104" when expanded and 66" when collapsed. Sold Individually.
This is a replacement aluminum cross rail for the G7 model that measures 104" when expanded and 66" when collapsed. Sold Individually.
$439.99
Collins Aluminum "C" Tire and Wheel Assembly Diamond Cut 4.80in x 8in
This is a replacement aluminum wheel assembly from Collins Manufacturing. This wheel is a 4.80 x 8 tire with a load range of "C" that is rated at 760 lbs. This wheel assembly comes with a diamond-cut aluminum rim. The aluminum rim won't rust and will prolong the life of your wheel. This is a good replacement option for your current Collins Dolly set up.
$137.99
Collins Dolly Wheel Steel 8" 5 Lug
This is a replacement wheel (rim) for your Collins Dollies by Collins Manufacturing. This is an 8" rim with a 5-lug bolt pattern. This rim is matte black finish and E-Coated to help prevent rust and corrosion. These wheels are sold as each.
$47.99
Collins Self Loading Dolly Mount (Pair)
Note: Special Handling Fees Apply for Specific Items
The Self Loading Dolly Mounts from Collins is ideal for trucks with a higher bed height. These mounts drop down over the body side about 11" were it is then loaded and then they swing up and back to the storage position. Reduces driver fatigue and back injuries from lifting the side frames over the side of the truck bed. Please select from the dropdown the tire size of your dollies you will use with this mount.
- No more climbing up on the truck. The dollies come down to you
- Chances reduced for any back injuries and accidents, less chance for liability claims, more time on job
- Encourages dolly tows due to ease of operation; generates more revenue!
- Self Loading Dolly Mounts assists in lifting the dollies on and off the truck - the gas shock does the work!
- No more scratching and denting truck's paint, or hand rails or dollies hub caps
- Self Loading Dolly Mounts fold back into place while dollying car
Replacement Parts
- DM-BSS - Collins Ball Stud Self Loading Dolly Mount
- DM-FLS - Collins Front Latch Assembly
- DM-CLS - Collins Dollies Cup Latch for DM-SL Dolly Mount
- DM-GSS - Collins Gas Strut 20" Self Load Dolly Mount
- DM-BH - Collins Dollies Dolly Mount Hinge Bolt
- DM-LS - Collins Dollies Latch Spring
- DM-RL - Collins Dollies Rear Latch Assembly
- DM-RL-G2 - Collins Dollies Rear Latch Assembly
- DM-SLTC - Collins Dollies Dolly Tire Cradle Set of 4
- DM-TCU - Collins Dollies Dolly Tire Cradle Set
- DM-LP - Collins Dollies Lynch Pin (10 Pack)
$679.99
Collins Replacement Steel Rail End for Cross Rails
Collins replacement steel rail end for aluminum cross rails.
$59.99
Collins Hi-Speed G7X Dollies with T12 Hybrid Cross Rails
Collins is super excited to introduce the new Collins Hi-Speed G7X Dolly. The G7X was initially designed specifically for Canadian tow operators. Dollies have been getting lighter; Canadian tow operators asked for a heavier duty dolly, built for the harsh winters, ice and snow, and off-road use of rural Canada.
$3,509.99
Collins Gas Strut 20" Self Load Dolly Mount
This is a replacement gas strut for the self-loading dolly mount by Collins Manufacturing. This strut measures 20" long, and is a direct replacement. This strut is sold as each.
$51.99
Collins G7 Hi-Speed Dolly PRO T10 Aluminum Cross Rails, Hubs, Wheels & Pry Bar
When you come across a wreck, you should be able to get that car where it needs to be, even when all you have is a wrecker. If you're on the interstate, this can be difficult as not many dollies aren't capable of handling interstate travel. Lucky for you, Collins has the Pro Line Hi-Speed Dolly to help you.
$2,819.99
–
$2,879.99
Collins Carrier Dolly Bed Ramps
Note: Due to size of product, additional handling charges may apply.
$55.99
Collins Dolly Tow Cradles
Maximize your dolly towing capabilities with these dolly tow cradles from Collins. When towing a vehicle with missing wheels these tow cradles are a must. Easy to use with a lightweight, heavy duty aluminum construction. Sold as a pair.
$349.99
Collins Dollies T10 Cross Rails Extended ID 90" - Collapsed OD 59"
This is a replacement cross rail for the G7 model that measures 90" when expanded and 59" when collapsed.
$399.99
Collins Dollies Hi-Speed Dolly Frame (SLZ) Body w/Components, Bare Spindles
This is a replacement frame body with components and bare spindles for the z-series model.
$464.99
Collins Replacement Breakover Bar, Zinc Plated
Replacement breakover bar for Collins Dollies. 1" round zinc-plated steel construction. 60"L
$69.99
Collins Dolly Replacement Left Trip Spring
This is a replacement left trip spring for Collin's Dollies. This spring will work with the SLX dollies.
$9.99
Collins Dolly Replacement Flat Rail Spring, Old Style
This is a replacement flat rail spring for the old style dolly rails.
$5.99
Collins Grease Seal
This is a replacement grease seal used in the hub assembly for Collins dollies by Collins Manufacturing. This grease seal is used to keep the grease in the bearing allowing the wheel assembly to stay lubricated properly to allow free rotation of the hub on the spindle.
$17.99
Collins Dollies Axle Bolt, Fits Carrier Dolly System
This is a replacement axle bolt for the Collins Carrier Dolly System, part number CD-S, by Collins Dollies.
$5.99
Collins Valve Stem Chrome
This is a replacement valve stem for the dolly wheel by Collins Manufacturing. This valve stem has a chrome finish.
$29.99
Collins Parallel Motion Dolly Mount (Pair)
The Parallel motion Dolly Mount from Collins is ideal for trucks with a lower bed height. The PM-DM is designed to be loaded on the outside of the truck bed and then swings up and back to the storage position. Reduces driver fatigue and back injuries from lifting the side frames over the side of the truck bed.
$499.99
Collins Dolly Rail Plunger Replacement
This is a replacement rail plunger for aluminum rails from Collins Dolly.
$13.99
Collins Dolly Bunks
Optimize your wrecker’s efficiency with the Collins Dolly Bunks—an underbody dolly storage solution designed to enhance safety, accessibility and organization. Engineered from high-strength, corrosion-resistant aluminum, these heavy-duty bunks are built for long-lasting performance in demanding environments.
$514.99
–
$529.99
Collins Dollies G7 T12 Cross Rail - Male Rail Aluminum (Inner Axle Tube)
This is a replacement of the T12 aluminum male (inner axle tube) component of the cross rail for the G7 model.
It is slightly bent in the middle to help the strength of the cross rail
$133.99
Collins Dollies Hi-Speed Dolly Frame (G7) Complete w/Aluminum Hubs Only
This replacement frame is intended for the G7 model. It only comes with aluminum hubs.
$899.99
Collins Ball Stud Self Loading Dolly Mount
This is a replacement ball stud used to mount the shock on the self-loading dolly mount by Collins Manufacturing. It is used with part numbers DM-SL4 and DM-SL5.
$24.99
Collins Aluminum Pry Bar Orange Rubber Grip
This is the replacement rubber grip for the Collins Pry Bar.
$3.99
Collins Dollies G7 Cross Rail - Female Rail Aluminum (T-12 Outer Axle Tube)
This is a replacement of the aluminum female (outer axle tube) component of the cross rail (T12) in the G7 series. Sold as a pair.
$185.99
Collins Dollies Hi-Speed Dolly (G7) Ratchet Spring
This is a replacement ratchet spring for the G7 model.
$10.99
Collins Dollies G7 Cross Rail - Female Rail Aluminum (T-10 Outer Axle Tube)
This is a replacement of the aluminum female (outer axle tube) component of the cross rail (T10) in the G7 series. Sold as a pair.
$165.99
Collins Male Rail Aluminum Inner Axle Tube for T10
T10 Cross Rail Aluminum Inner/Male Tube (CR-MRA-T10)
G7 Cross Rail - Male Rail Aluminum (Inner Axle Tube) for T10. 50.75" length, and compatible with the 4.8 tires. Replacement T10 Male Inner Axle Aluminum from Collins Manufacturing for our Cross Rails.
$120.99
Collins Gas Strut 10" Self Load Dolly Parallel Motion Mount
This is a replacement gas strut for the self-load dolly parallel motion mount by Collins Manufacturing. This strut measures 10" long, and is a direct replacement. This strut is sold as each.
$51.99
Filter
1 - 60 of 130 items
Collins Manufacturing Corp is a pioneer in the towing industry, known for producing heavy-duty dollies that offer exceptional stability on the road. Our inventory features genuine Collins parts, including mounts and straps, to ensure your equipment is always road-ready. Trust the innovative design and durable construction of Collins Hi-Speed and Carrier dollies to handle your most challenging towing tasks with ease.
