Winch Replacement Parts

This OEM Factory Replacement Cable Tensioner, from Miller Industries, will keep constant pressure against your winch drum, which mak es your wire rope wind smoother. This 11" wide tensioner is easy to install and keeps your cable from free spooling. It will fit Ram sey 8,000 lb. worm style winches on Century Car Carriers. This part can be used to replace Part Number 124001329.

This is a replacement Parker winch motor from Miller Industries. It is used on the hydraulic assembly of car carriers and wreckers equipped with 8,000 lb. winches. This winch motor is commonly used on hydraulic worm winches, such as Ramsey Winches. This motor is used on Century, Chevron, Champion, Challenger, Holmes, and Vulcan Car Carriers. It is also used on Century, Challenger, Champion, and Eagle light duty wreckers. To view what specific models this winch motor will fit, See Features below. To view the part schematics, see the Brochures tab.

This 8.5" Heavy Duty Roller Fairlead from Miller Industries is for Century, Challenger, Champion and Vulcan Carrier Beds with a Ramsey Worm Style Winch. This fairlead fits 10 Series, 15 Series, 20 Series, 12 Series LCGs and 16 Series LCGs. This roller fairlead is designed to reduce cable wear, especially on sharp angle pulls. To view specific models of carrier this fairlead will fit see Features below. To view part schematics click on the Brochures tab.

Avoid conflict with passing motorists when free spooling your car carrier or side puller winch line with Zip's Custom Ditch Side Drum Release. This mechanical device allows the operator to safely engage or dis-engage the winch drum from the passenger side of the truck, keeping the driver out of the lane of travel. This kit includes a lever, T-handle, bracket and mounting hardware and works with side puller and car carrier winches. See below for fitment applications.

This Roller Tensioner Kit from Ramsey Winch Company has been made special for the H-200 Series Winches used on Century Car Carriers by Miller Industries. It is Underwound Style only.

This is a replacement air bag used on DP winch tensioners on all DP Winches.

Use this Winch Level Winder to tightly respool your unloaded cabled onto the cable drum of your wrecker or car carrier winch. Tensioners prevent wire rope from kinking, backlashing and birdnesting by putting constant tension against the winch drum. This level winder fits Ramsey model 200 and 300 Series Winches.

This is a replacement stage 3 carrier assembly in the winch. This replacement carrier fits a 9 Series Warn Winch.

This 11" Cable Tensioner is for use with 1/4" - 1/2" wire rope and drum sizes 10" - 11". Cable tensioners have a spring-loaded design that provides constant tension on the winch cable. This eliminates a slack cable condition and improves the winding of the cable on the drum. The rollers are high carbon steel with bronze bushings for long service life. The vertical rollers prevent the cable from rubbing the sides of the drum.

This is a warn winch 8" tension plate from Miller Industries.

Gasket Kit for the gear box of Holmes 480,500,600, and 750 wreckers.

This Warn Industries cable tensioner plate fits 8" drum.

Ramsey Winch shifter assembly for RPH-8000 winches. This is a manual operation shifter.

This 18 Tooth Chain Drive Socket is used on Holmes 500, 600, and 750 trucks.

These paintable Cable Tensioners keep constant pressure against your winch drum, allowing your cable to wind more smoothly. Include mounting hardware and instructions.

This is a carrier, stage 2 and series 9.

12' Remote Control for the Ramsey DC-200 and most Ramsey Recreational Winches. Previously listed under part numbers: RW-251110, RMR12.

This is a seal kit for a Ross MK series Short Winch Motor on a Century Carrier.

This is a replacment warn roller 8".

Pinion gear for Holmes 750 to drive the winch drum. Only works on Holmes 750.

Keep wire rope wound tightly and neatly on the winch drum with this Wire Rope Tension Kit. Designed for all industrial winches with 10" drums, this kit prevents wire rope tangling and assists in uniform wire rope spooling. Installation is fast and easy.

OEM Factory Replacement Cable Tensioners. These Cable Tensioners keep constant pressure against your winch drum, which makes your wire rope wind smoother.

Complete Roller Guide and Tensioner kit for Jerr Dan carriers that have Ramsey 8,000 lb and 10,000 lb worm gear winches.

Replacement Ring Gear for a Series 9 Winch by Warn Industries.

This is a cable tensioner kit for DP winches with a 13-3/4" wide drum.

Ramsey Winch manual shifter assembly for RPH-12000 and RPH-15000 winches.

Sprocket, 28 tooth for Holmes 480,500,600, and 750

This is a sun gear, it is series 9.

This Cable Tensioner from Diversified Products is 11" wide and will fit 8,000 lb. winches from Ramsey. The tensioner keeps constant pressure against your winch drum, making your wire rope wind smoother. It's also very easy to install and it keeps your cable from free spooling.

This 9" Cable Tensioner is for use with 1/4" - 1/2" wire rope and drum sizes 8" - 9". Cable tensioners have a spring-loaded design that provides constant tension on the winch cable. This eliminates a slack cable condition and improves the winding of the cable on the drum. The rollers are high carbon steel with bronze bushings for long service life. The vertical rollers prevent the cable from rubbing the sides of the drum.

This is a replacement right hand worm gear for the H-800 Winch by Ramsey Winch Company.

This is a replacement S/P Disc Brake. This replacement brake fits a 9 Series Warn Winch.

Ramsey Winch level winder for Model 400 Ramsey Winch. The level winder is used to help prevent winch cables from bird nesting on the winch drum.

This Cable Tensioner is designed for rear mount winches with a 6"-7" wide drum. The tensioner guides wire rope evenly and tightly back into your winch drum.

This is a Miller spade weldment dock stabilizer tube. It measures 5 x 4.

This is a replacement Series 9 gear housing.

A 13-3/4" half round rub bar on the tensioner plate for DP winches.

Prevent damage to the sidewalls of your front mount winch! This rugged bolt-on roller fairlead keeps wire rope wound evenly on the drum while preventing damage to the side walls of the winch.

This replacement seal kit is used on Parker winch motors commonly found on Century Carriers.

Miller dp winch tensioner replacement.

Zip's Custom Winch Free Wheel Lever Extensions. These extensions are designed specifically for the Century 2465 and Vulcan V-24 12 Ton Wreckers by Miller Industries. When mounted on a Medium Duty Chassis the winches are just too tall for most operators to quickly and safely reach the standard winch clutch release levers. Add these extensions and you will be able to easily reach the levers and engage or disengage the free wheel on both winches. Simple to install using the existing lever pins and handle hardware found standard on the winch free wheel levers.

This is a replacement hydraulic winch motor that runs the hydraulic assembly on most light duty modular wreckers equipped with 8,000 lb. winches from Miller Industries. This hydraulic motor is 4 cubic inches and is commonly used with 8,000 lb. winches. To view which specific models this motor will fit, see Features below. To view the part schematics, see the Brochure tab.

This is a stainless steel plate tensioner rod from Miller Industries.

Positive Clutch for Holmes 750,600,500,480 and 440 Holmes Gear Boxes on Wreckers.

This is a replacement stage 3 carrier assembly in the winch. This replacement carrier fits a 9 Series Warn Winch.

Roller chain for size 60 chain.

This is a replacement cable tensioner from Mile Marker Industries.

This Roller Tensioner Kit from Ramsey Winch Company is used on HD-P 8,000 and 10,000 Planetary Hydraulic Winches. It fits a Standard Drum and has Over or Underwound Styles.

This is a replacement Seal Kit for a Ramsey model H-200 winch.

Chain connecting link for size 60 chain.

This is a replacement air cylinder for the winch on heavy duty wreckers by Miller Industries. This air cylinder is what lets your winch be able to free spool at the push of a button. This cylinder has a 2" bore and a 2" stroke. To see which models this cylinder fits please see Features below. To view the part schematics click on the Brochure tab above.

This is a replacement solenoid assembly for a Ramsey winch. This assembly comes with the housing and runs off 12 volts. This solenoid assembly works with the DC-200 & DC-300 Series Winches from Ramsey Winch.

Ramsey Winch cable anchor. This anchor holds the winch cable into the drum of the Ramsey H-800 Winch.

A 12" half round rub bar on the tensioner plate for DP Model # 52864 winches and other DP winches with a 12" wide drum.

A 14-1/2" half round rub bar on the tensioner plate for DP winches.