0 Item(s)
You have no items in your shopping cart.
Customers who bought this item also bought
B/A Products Underlift Tie Downs w/ Protective Sleeves Heavy Duty 2"
Underlift Tie-Down Straps will give you a secure tie-down and help you avoid
damage that is commonly associated with chain straps. These 2" wide tie-downs
are 76" long and come with ratchets and protective sleeves.
$77.99
3M Acrylic Foam Tape
3M Acrylic Foam Tape 4229P is a 0.76mm thick, medium-density, dark grey acrylic foam double sided adhesive tape with high performance acrylic adhesives. Double Sided Acrylic foam adhesive tape is grey with red polyethylene release liner. General purpose double sided adhesive tape with superior adhesive bonding strength for a wide variety of surfaces. Can be used to stick neodymium magnets to non-ferrous material surfaces like plastic, copper, stainless steel, wood, glass, tiles, concrete as these materials does not work directly with magnets. The acrylic foam of 0.76mm thick allows the adhesive to mould to slightly rough surfaces like concrete.
$1.25
FVP Brake Cleaner 13 oz. Can
The pros know that you don't mess around when it comes to brakes. FVP Brake Cleaner meets or exceeds OE quality with a price so competitive it will stop you in your tracks. FVP Non-Chlorinated Brake Part Cleaner removes oil, grease, brake fluid and containments quickly, with no residue.
$4.49
Temflex Vinyl Insulating Electrical Tape
Temflex vinyl insulating electrical tape. It is flame retardant, lead free,
cold and sunlight resistant, suitable for use at not more than 600V and not
more than 80?C (176?F).
$2.99
Howes Lubricator and Penetrating Oil 12 oz.
Howes Lubricator heavy-duty, multi-purpose Lubricator and Penetrating Oil is guaranteed to loosen rusted nuts and bolts. The lubricant can be sprayed on wires, leads and distributor caps and is safe to use on almost any surface.
$16.99
Cable Tie, Black, 11.1"
Fastenal 11.1" 50 lbs. tensile UV black nylon 6.6 Power Phase cable tie.
Cable ties secure wire bundles, harnesses and components quickly without
slipping. Sold Each (Individually)
$0.19
Phoenix Alcoa HD Hub Cover Ford
No lugnut removal is required for installation. Phoenix ABS Axle Hub Cover
with Popout for 10 bolt [33 mm hex lugnut] pattern on 285 mm bolt circle.
$54.99
–
$150.99
Phoenix Rear Hub Cover Kit Alcoa Rims Ford
Rear chromed ABS hub and lug nut cover kit. 10 lug on 285mm bolt circle, 22mm
diameter lug stud. Kit includes ribbed jamnuts that are screwed over top of OE
lug nuts. The hub cover then snaps securly to the ribbed jam nuts. Pop out
centers for hub access. Snaps securely to the OE lug nut. Includes 2 hub covers
and mounting hardware.
$150.99
Tork Advanced ShopMax Centerfeed Shop Towels
Tork Advanced ShopMax Wiper 450 Center-feed shop towels are highly absorbent, offering excellent wipe-dry capabilities. Their strong construction offers durability and the self-dispensing pop-up box offers controlled dispensing. They contain 85% paper content (60% recycled, 40% postindustrial) and 15% synthetic emulsion. Sold in a box of 200.
$21.99
Fastenal 1/4" - 28 Grease Fitting w/ Ball Check
This straight grease fitting is used to dispense grease into a mating part using a grease gun. It is made from steel with a zinc finish and comes with a ball check. This part has replaced part number
$0.29
2 Wire Cable 14Ga
Premium quality primary wire cable manufactured to meet or exceed ATA
specifications. Color coded PVC cover resists weather and protects the
individual color coded, annealed copper conductor strands. Commonly used to
install or repair marker/ID light circuits.
$0.86
Pin Pivot Cable Hold Down For DP Model # 13968 Winches
Cable hold down pivot pin for DP model # 13968 winches.
$39.99
Related products
Cable Tensioner for Vulcan Wheel Snatcher, Laser, H400 Winch Drums
These paintable Cable Tensioners keep constant pressure against your winch drum, allowing your cable to wind more smoothly. Include mounting hardware and instructions.
$132.99
Miller Warn Winch 8" Tensioner
OEM Factory Replacement Cable Tensioners. These Cable Tensioners keep constant
pressure against your winch drum, which makes your wire rope wind smoother.
$244.99
Jerr-Dan 8,000 lbs Cable Guide/Tensioner Assembly
Complete Roller Guide and Tensioner kit for Jerr Dan carriers that have Ramsey
8,000 lb and 10,000 lb worm gear winches.
$722.99
Miller DP Winch 13 3/4" Wide Drum Cable Tensioner Kit
This is a cable tensioner kit for DP winches with a 13-3/4" wide drum.
$880.99
Miller Spade Weldment Dock Stabilizer Tube 5" x 4"
This is a Miller spade weldment dock stabilizer tube. It measures 5 x 4.
$226.99
B/A Products 9" Cable Tensioner
This 9" Cable Tensioner is for use with 1/4" - 1/2" wire rope and drum sizes 8" - 9". Cable tensioners have a spring-loaded design that provides constant tension on the winch cable. This eliminates a slack cable condition and improves the winding of the cable on the drum. The rollers are high carbon steel with bronze bushings for long service life. The vertical rollers prevent the cable from rubbing the sides of the drum.
$198.99
Diversified 11" Drum Cable Tensioner
This Cable Tensioner from Diversified Products is 11" wide and will fit 8,000
lb. winches from Ramsey. The tensioner keeps constant pressure against your
winch drum, making your wire rope wind smoother. It's also very easy to install
and it keeps your cable from free spooling.
$132.99
Miller 11" Cable Tensioner
This OEM Factory Replacement Cable Tensioner, from Miller Industries, will keep constant pressure against your winch drum, which mak
es your wire rope wind smoother. This 11" wide tensioner is easy to install and keeps your cable from free spooling. It will fit Ram
sey 8,000 lb. worm style winches on Century Car Carriers. This part can be used
to replace Part Number 124001329.
$168.99
Miller Heavy Duty 8.5" Fairlead Roller
This 8.5" Heavy Duty Roller Fairlead from Miller Industries is for Century,
Challenger, Champion and Vulcan Carrier Beds with a Ramsey Worm Style Winch.
This fairlead fits 10 Series, 15 Series, 20 Series, 12 Series LCGs and 16
Series LCGs. This roller fairlead is designed to reduce cable wear, especially
on sharp angle pulls. To view specific models of carrier this fairlead will fit
see Features below. To view part schematics click on the Brochures tab.
$210.99
Ramsey 200 Series Century Car Carrier Roller Tensioner Kit
This Roller Tensioner Kit from Ramsey Winch Company has been made special for
the H-200 Series Winches used on Century Car Carriers by Miller Industries. It
is Underwound Style only.
$154.99
Ramsey 200 Series Winch Level Winder
Use this Winch Level Winder to tightly respool your unloaded cabled onto the
cable drum of your wrecker or car carrier winch. Tensioners prevent wire rope
from kinking, backlashing and birdnesting by putting constant tension against
the winch drum. This level winder fits Ramsey model 200 and 300 Series Winches.
$200.99
B/A Products 11" Cable Tensioner
This 11" Cable Tensioner is for use with 1/4" - 1/2" wire rope and drum sizes 10" - 11". Cable tensioners have a spring-loaded design that provides constant tension on the winch cable. This eliminates a slack cable condition and improves the winding of the cable on the drum. The rollers are high carbon steel with bronze bushings for long service life. The vertical rollers prevent the cable from rubbing the sides of the drum.
$234.99
Cable Tensioner for Vulcan Wheel Snatcher, Laser, H400 Winch Drums
These paintable Cable Tensioners keep constant pressure against your winch drum, allowing your cable to wind more smoothly. Include mounting hardware and instructions.
$132.99
Miller Warn Winch 8" Tensioner
OEM Factory Replacement Cable Tensioners. These Cable Tensioners keep constant
pressure against your winch drum, which makes your wire rope wind smoother.
$244.99
Jerr-Dan 8,000 lbs Cable Guide/Tensioner Assembly
Complete Roller Guide and Tensioner kit for Jerr Dan carriers that have Ramsey
8,000 lb and 10,000 lb worm gear winches.
$722.99
Miller DP Winch 13 3/4" Wide Drum Cable Tensioner Kit
This is a cable tensioner kit for DP winches with a 13-3/4" wide drum.
$880.99
Miller Spade Weldment Dock Stabilizer Tube 5" x 4"
This is a Miller spade weldment dock stabilizer tube. It measures 5 x 4.
$226.99
B/A Products 9" Cable Tensioner
This 9" Cable Tensioner is for use with 1/4" - 1/2" wire rope and drum sizes 8" - 9". Cable tensioners have a spring-loaded design that provides constant tension on the winch cable. This eliminates a slack cable condition and improves the winding of the cable on the drum. The rollers are high carbon steel with bronze bushings for long service life. The vertical rollers prevent the cable from rubbing the sides of the drum.
$198.99
Diversified 11" Drum Cable Tensioner
This Cable Tensioner from Diversified Products is 11" wide and will fit 8,000
lb. winches from Ramsey. The tensioner keeps constant pressure against your
winch drum, making your wire rope wind smoother. It's also very easy to install
and it keeps your cable from free spooling.
$132.99
Miller 11" Cable Tensioner
This OEM Factory Replacement Cable Tensioner, from Miller Industries, will keep constant pressure against your winch drum, which mak
es your wire rope wind smoother. This 11" wide tensioner is easy to install and keeps your cable from free spooling. It will fit Ram
sey 8,000 lb. worm style winches on Century Car Carriers. This part can be used
to replace Part Number 124001329.
$168.99
Miller Heavy Duty 8.5" Fairlead Roller
This 8.5" Heavy Duty Roller Fairlead from Miller Industries is for Century,
Challenger, Champion and Vulcan Carrier Beds with a Ramsey Worm Style Winch.
This fairlead fits 10 Series, 15 Series, 20 Series, 12 Series LCGs and 16
Series LCGs. This roller fairlead is designed to reduce cable wear, especially
on sharp angle pulls. To view specific models of carrier this fairlead will fit
see Features below. To view part schematics click on the Brochures tab.
$210.99
Ramsey 200 Series Century Car Carrier Roller Tensioner Kit
This Roller Tensioner Kit from Ramsey Winch Company has been made special for
the H-200 Series Winches used on Century Car Carriers by Miller Industries. It
is Underwound Style only.
$154.99
Ramsey 200 Series Winch Level Winder
Use this Winch Level Winder to tightly respool your unloaded cabled onto the
cable drum of your wrecker or car carrier winch. Tensioners prevent wire rope
from kinking, backlashing and birdnesting by putting constant tension against
the winch drum. This level winder fits Ramsey model 200 and 300 Series Winches.
$200.99
B/A Products 11" Cable Tensioner
This 11" Cable Tensioner is for use with 1/4" - 1/2" wire rope and drum sizes 10" - 11". Cable tensioners have a spring-loaded design that provides constant tension on the winch cable. This eliminates a slack cable condition and improves the winding of the cable on the drum. The rollers are high carbon steel with bronze bushings for long service life. The vertical rollers prevent the cable from rubbing the sides of the drum.
$234.99
