Free shipping is only valid on total purchases of $199 or more and ground shipments within the contiguous 48 states for products weighing less than 150 lbs. Special handling fees may be required for some products.Shipping fees will be added for all orders under $199 or that include oversized items or any item of 150 lbs or more. Please contact customer service if you have any questions.
National has built a reputation as one of the most respected names in the
industry. We have offered premium sealing solutions for more than 75 years. Our
design team keeps pace with the industry and provides advanced solutions for
today's vehicles. * Temperature range: -40?F to 225?F / -40?C to 107?C *
Abrasion-resistant nitrile with spring-loaded main lip for positive sealing
with reduced shaft interference * Red 37 Series oil bath seals deliver
dependable point contact seal * Unitized construction provides greater
structural integrity, easier installation and main lip protection * Unique
rubber I.D. and O.D. includes patented SURE-LOCK? ribs that prevent shaft leaks
and bore contamination
AW Direct Elite Series Winch Cables can also be known as: winch line, wire rope
carrier cables, and rollback cables. The Fiber Core Winch Cables provide superior flexibility. When pressure is exerted on the working winch cable, the lubricant
reservoir gives off lubricant to minimize the wear of wire on wire, assuring
longer service life. These winch cables also come with an Alloy Self-Locking
Swivel Hook that will not open when under load, providing a secure, safe
connection. This swivel hook will rotate as it is reeled into the drum so that
it will wrap and lay better.
Winch Cables can also be known as: winch line, wire rope, wrecker cables, car carrier cables, and rollback cables. The Elite Series winch cables from AW Direct provide strength and flexibility.
Each of these axle straps comes with a d-ring attached at each end. These 3 ply
straps consist of B/A's Classic Web with protective polyester edges, making
this the heaviest, most durable style of axle strap. For the tower that uses
axle straps frequently or on a daily basis.
The pros know that you don't mess around when it comes to brakes. FVP Brake Cleaner meets or exceeds OE quality with a price so competitive it will stop you in your tracks. FVP Non-Chlorinated Brake Part Cleaner removes oil, grease, brake fluid and containments quickly, with no residue.
These are LED Ultra-Thin Strobe Lights from Buyers Products. These are lights run off of
12 volts and draw 0.5 amps. They also have 23 flash patterns that let you
customize the look of your equipment. These lights include retail packaging and
a 5 year warranty.
In The Ditch Peg Board Mounted Aerosol Can Holders come in 3 different sizes: (1) Can (3) Can and (6) Can holders. Our spray can holders are a great way to not only store your aerosol cans, they work great to keep your aerosols organized and easy to access. Our peg board spray can storage racks are made from steel and are powder coated in a black finish. The hole spacing for mounting our aerosol storage racks are made so you can install them in peg board using our Quick Mount Peg Board Screw . Installing your spray can rack is simple, just line up the mounting holes with the peg board holes and install our peg board screws. It s that simple! No drilling, no measuring, no leveling and best of all you can reuse the peg board screw over and over with no damage to the peg board hole. If you want to install the aerosol holder on any flat surface, just the type of hardware for each mounting surface. You can mount
with pegboard mounting screws, dry wall screws, metal screws or mount to wood with a wood screw, it s your choice. We designed these for use in our manufacturing facility and put a lot of thought into getting everything just right. Like most of the products we make, we designed them because no one seemed to build what we wanted that actually worked.
The Revolution Boom Head from In The Ditch is a direct replacement for the
Holmes 440, SP8000, SP12000 Side Puller and the Century Midnight Express. This
wire rope guide cover comes off with one hand, allowing for easy wire rope
installation.
Note: Special Handling Fees Apply for Specific Items
This zinc-plated mild steel L-Arm from Miller Industries fits the Vulcan 10
Series car carriers and 800 Series light-duty wheel lifts with option of driver
or passenger side fit. Sometimes called a tire restraint or wheel retainer, the
2 x 2.5 tube is designed to work with the driver side outer crosstube 8800900.
This strapless system offers a Working Load Limit of 4,000 lbs. This scoop also
features adjustment holes for proper tire fitment and a grated pan for improved
grip.
2 x 2.5 aluminum tube
Opton of driver or passenger positioning
Adjustment holes
Grated scoop tire pan
Use with 8800900 outer crosstube
WLL: 4,000 lbs.
Fits:
2003-Current Vulcan 10 Series Steel & Aluminum Carriers
2001-Current Vulcan 10 Series Extreme Angle Steel Carriers
"LED" represent the cutting edge of lighting technology, LED lights operate on
a totally different concept than traditional incandescent or bulb style lights.
Instead of using a brittle metal filament that is susceptible to road shock and
vibration. LEDs are solid-state devices utilizing an electronic chip that is
encapsulated in an epoxy substrate. This design provides increased durability
and a protective seal from road elements like dirt moisture and other corrosive
agents.
Endless synthetic slings are made from a continuous loop of polyester and jacketed in a double layer of polyester. Internal red warning fibers alert you of damage should the sling become torn or damaged.
These paintable Cable Tensioners keep constant pressure against your winch drum, allowing your cable to wind more smoothly. Include mounting hardware and instructions.
OEM Factory Replacement Cable Tensioners. These Cable Tensioners keep constant
pressure against your winch drum, which makes your wire rope wind smoother.
This 9" Cable Tensioner is for use with 1/4" - 1/2" wire rope and drum sizes 8" - 9". Cable tensioners have a spring-loaded design that provides constant tension on the winch cable. This eliminates a slack cable condition and improves the winding of the cable on the drum. The rollers are high carbon steel with bronze bushings for long service life. The vertical rollers prevent the cable from rubbing the sides of the drum.
This Cable Tensioner from Diversified Products is 11" wide and will fit 8,000
lb. winches from Ramsey. The tensioner keeps constant pressure against your
winch drum, making your wire rope wind smoother. It's also very easy to install
and it keeps your cable from free spooling.
This OEM Factory Replacement Cable Tensioner, from Miller Industries, will keep constant pressure against your winch drum, which mak
es your wire rope wind smoother. This 11" wide tensioner is easy to install and keeps your cable from free spooling. It will fit Ram
sey 8,000 lb. worm style winches on Century Car Carriers. This part can be used
to replace Part Number 124001329.
This 8.5" Heavy Duty Roller Fairlead from Miller Industries is for Century,
Challenger, Champion and Vulcan Carrier Beds with a Ramsey Worm Style Winch.
This fairlead fits 10 Series, 15 Series, 20 Series, 12 Series LCGs and 16
Series LCGs. This roller fairlead is designed to reduce cable wear, especially
on sharp angle pulls. To view specific models of carrier this fairlead will fit
see Features below. To view part schematics click on the Brochures tab.
This Roller Tensioner Kit from Ramsey Winch Company has been made special for
the H-200 Series Winches used on Century Car Carriers by Miller Industries. It
is Underwound Style only.
Use this Winch Level Winder to tightly respool your unloaded cabled onto the
cable drum of your wrecker or car carrier winch. Tensioners prevent wire rope
from kinking, backlashing and birdnesting by putting constant tension against
the winch drum. This level winder fits Ramsey model 200 and 300 Series Winches.
This 11" Cable Tensioner is for use with 1/4" - 1/2" wire rope and drum sizes 10" - 11". Cable tensioners have a spring-loaded design that provides constant tension on the winch cable. This eliminates a slack cable condition and improves the winding of the cable on the drum. The rollers are high carbon steel with bronze bushings for long service life. The vertical rollers prevent the cable from rubbing the sides of the drum.
These paintable Cable Tensioners keep constant pressure against your winch drum, allowing your cable to wind more smoothly. Include mounting hardware and instructions.
OEM Factory Replacement Cable Tensioners. These Cable Tensioners keep constant
pressure against your winch drum, which makes your wire rope wind smoother.
This 9" Cable Tensioner is for use with 1/4" - 1/2" wire rope and drum sizes 8" - 9". Cable tensioners have a spring-loaded design that provides constant tension on the winch cable. This eliminates a slack cable condition and improves the winding of the cable on the drum. The rollers are high carbon steel with bronze bushings for long service life. The vertical rollers prevent the cable from rubbing the sides of the drum.
This Cable Tensioner from Diversified Products is 11" wide and will fit 8,000
lb. winches from Ramsey. The tensioner keeps constant pressure against your
winch drum, making your wire rope wind smoother. It's also very easy to install
and it keeps your cable from free spooling.
This OEM Factory Replacement Cable Tensioner, from Miller Industries, will keep constant pressure against your winch drum, which mak
es your wire rope wind smoother. This 11" wide tensioner is easy to install and keeps your cable from free spooling. It will fit Ram
sey 8,000 lb. worm style winches on Century Car Carriers. This part can be used
to replace Part Number 124001329.
This 8.5" Heavy Duty Roller Fairlead from Miller Industries is for Century,
Challenger, Champion and Vulcan Carrier Beds with a Ramsey Worm Style Winch.
This fairlead fits 10 Series, 15 Series, 20 Series, 12 Series LCGs and 16
Series LCGs. This roller fairlead is designed to reduce cable wear, especially
on sharp angle pulls. To view specific models of carrier this fairlead will fit
see Features below. To view part schematics click on the Brochures tab.
This Roller Tensioner Kit from Ramsey Winch Company has been made special for
the H-200 Series Winches used on Century Car Carriers by Miller Industries. It
is Underwound Style only.
Use this Winch Level Winder to tightly respool your unloaded cabled onto the
cable drum of your wrecker or car carrier winch. Tensioners prevent wire rope
from kinking, backlashing and birdnesting by putting constant tension against
the winch drum. This level winder fits Ramsey model 200 and 300 Series Winches.
This 11" Cable Tensioner is for use with 1/4" - 1/2" wire rope and drum sizes 10" - 11". Cable tensioners have a spring-loaded design that provides constant tension on the winch cable. This eliminates a slack cable condition and improves the winding of the cable on the drum. The rollers are high carbon steel with bronze bushings for long service life. The vertical rollers prevent the cable from rubbing the sides of the drum.