Tail Light Assemblies & Wiring Harnesses

This 4" Round Back Up Alarm from Miller Industries can be installed in the rear tail light panel of Century, Champion, and Vulcan Car Carriers. Please see the brochure tab for a list of breakdowns.

6" LONG ID-1/4" SHRINK ID-3/32".

* (2) hydraulic hoses for the winch* Wiring harness for the light bar* Pre-assembled* 3/8" thick.

This is a Miller Industries license plate light. It is designed to fit any Century or Vulcan LCG Series Car Carrier. Fits into the Tail Light.

Miller Industries' winch loop harness assembly for 17', 16' and 19' Century, Champion and Vulcan carrier beds.

This is a Hose Tray used on 21' bed car carriers by Miller Industries. This hose tray is 9' long x 3.5" wide. The channel where the hose lays in is 2" wide. This hose tray will fit 21' beds from Century, Champion and Vulcan. See Features Below to see which models it will fit. This part can be used to replace Part Number 12-0720283. This part will be cut into three sections in all cases for economical shipment.

Update the wiring for the exterior DOT lighting on your Century car carrier with this new harness from Miller Industries. Wiring fits up to 21'6" decks. Replaces 0302217.

This Miller Industries product is the right hand side tail light housing for Century or Vulcan 10, 15, 20 or 30 Series Car Carriers 2005-Current. Its painted black steel shell houses all the right hand side tail light components, as well as the face plate. It bolts onto the mounting bracket (12-0710783) which is attached to the subframe of the carrier. See features for additional information. This part can be used to replace Part Number 12-0801574.

This Miller Industries product is the left hand side tail light housing for Century or Vulcan LCG Series Car Carriers (Generation I or II). Its painted black steel shell houses all the left hand side tail light components, as well as the face plate. It bolts onto the mounting bracket (12-0710783) which is attached to the subframe of the carrier. See features for additional information.

This Miller Industries product is the left hand side tail light housing for Century or Vulcan 10, 15, 20 or 30 Series Car Carriers 2005-Current. Its painted black steel shell houses all the left hand side tail light components, as well as the face plate. It bolts onto the mounting bracket (12-0710783) which is attached to the subframe of the carrier. See features for additional information. This part can be used to replace Part Number 12-0801573.

This is a stainless steel tail light face plate for the right hand side of the Century Generation II LCG car carriers. The light configuration for this bezel is horizontal. Does not include lights or license plate mounting hardware as pictured in photo. All that is included is the stainless steel face plate.

This Miller Industries product is the right hand side tail light housing for Century or Vulcan LCG Series Car Carriers (Generation I or II). Its painted black steel shell houses all the right hand side tail light components, as well as the face plate. It bolts onto the mounting bracket (12-0710783) which is attached to the subframe of the carrier. See features for additional information.

This is a stainless steel tail light face plate for the left hand side of the Century Generation II LCG car carriers. The light configuration for this bezel is horizontal. Does not include lights or back up alarm pictured in photo. All that is included is the stainless steel face plate.

This Miller Industries tail light mounting bracket connects the left hand tail like housing to the subframe of the car carrier. It is bolt-on and is painted steel black. It will work for any Century or Vulcan car carrier. See Features for additional information.

This is a stainless steel tail light mounting plate for car carriers. It is for the right hand side of the tail light assembly. The mounting holes are cut out vertically, to allow your tail lights to be mounted vertically. This part can be used to replace Part Number 12-0720031.

This Miller Industries tail light mounting bracket connects the right hand tail like housing to the subframe of the car carrier. It is bolt-on and is painted steel black. It will work for any Century or Vulcan car carrier. See Features for additional information.

This is a Miller Industries tail light face plate for the right hand side of any car carrier excluding the LCG Series. It is available in either black painted steel or stainless steel. This polished stainless steel will not rust and it uses a new style grommet type of back-up alarm. The light configuration is horizontal but vertical is also available (see part # 12-0721340).

This is a stainless steel tail light mounting plate for car carriers. It is for the left hand side of the tail light assembly. The mounting holes are cut out vertically, to allow your tail lights to be mounted vertically. This part can be used to replace Part Number 12-0720030.

Miller Industries' winch loop harness assembly for 21' Century and Vulcan 16 Series Generation 2 LCG Car Carriers.

This is a Miller Industries tail light face plate for the left hand side of any car carrier excluding the LCG Series. It is available in either black painted steel or stainless steel. This polished stainless steel will not rust and it uses a new style grommet type of back-up alarm. The light configuration is horizontal but vertical is also available (see part # 12-0721339).

This Miller Industries product is a full assembly of the right hand side of a tail light section on a car carrier. It is designed fo r any Century 10, 12, 15, 20, or 30 Series. It includes all the necessary parts to replace the entire tail light section. This produ ct bolts onto the mounting bracket (12-0710784) which is attached to the subframe of the carrier. The replacement faceplate part number is 12-07000562. See features for additional inform ation. This part can be used to replace Part Number 12-0905007.

This Miller Industries products is a full assembly of the left hand side of a tail light section on a car carrier. It is designed for any Century 10, 12, 15, 20, or 30 Series. It includes all the necessary parts to replace the entire tail light section. This product bolts onto the mounting bracket which is attached to the subframe of the carrier. See features for additional information. This part can be used to replace Part Number 12-0905006.

This Miller Industries LED side light is a dual-purpose light that will operate as a marker light and when the docking light function is activated, the light will operate as an LED flood light. Included with this is the flasher control power unit which allows it to function as a marker light and flasher light.