Truck Light Parts
Showing 40 items
Your Filters
Clear All
Filter
Sort by
Loading...
Loading...
Phoenix 3 Wire Clip On Pig Tail
This three-prong, right angle clip pigtail provides power connection for sealed
lights, specifically combination stop, turn and tail lights. The red and black
lead wires are bare for making power connection. Red is turn signal, and black
is tail signal. The white ground wire has #10 ring terminal at the end.
$2.79
Maxxima Continuous Harness
These are Continuous Wire Harness Rolls, by Maxxima. These Harnesses come with
various connects an different length leads. These light harness leads are sold
as each. Enter the number of leads into the quantity field then add to your
cart.
$1.39
–
$2.29
Maxxima Electrical PL-3 Right Angle Stop / Tail / Turn
3-Pin Right Angle STT Plug with 10" Leads from Maxxima. This part can be used to replace Part Number M50900-X.
$1.79
United Safety Tow Light Extension One Female and One Male Connector Cable 4 Wire
Extension tow light cable assembly for use as an extension for those "long
loads."
$60.99
–
$82.99
Maxxima Electrical Resistor Load Equalizer
3-Pin Load Equalizer by Maxxima. When replacing an incandescent turn signal or
other flashing light with an LED light, the amp draw of the LED light is so low
that sometimes it will flash too slow or too fast, or not flash at all. This
load equalizer will level out the amp draw with the flasher module to allow the
LED light to flash at the correct speed.
$10.89
Truck-Lite Stop/Turn/Tail Fit 'N Forget S.S. Plug
Keeps water, salt and other corrosives from LED lamps. 8" 16 gauge GPT wire;
tin plated brass terminals. Stripped end and ring terminal Fit 'N Forget S.S.
plug.
$4.99
Maxxima 3 Pin Delphi Connector Freightliner LED Replacement Side Lights
3-Pin Delphi Connector for M63123 Series Side Turn/Marker Light from Panor
Corp.
$5.09
Headlight Replacement Strobe Tube, 10 Joule, 20W, 5-prong Pin
This 10 Joule, 14W Replacement Strobe Tube features 5-prong pin. Fits 90% of all Star Headlight Strobe Beacons, including SX17 and SXP4.
$26.99
Truck-Lite Marker Clearance Fit 'N Forget M/C .180 Bullet Plug
Keeps water, salt and other corrosives from LED lamps. Combine with LED lamps
for Lifetime Lighting Warranty eligibility. 5" 16 gauge GPT wire with tin
plated brass bullets/receptacles. Built as a Fit 'N Forget M/C .180 bullet
terminal plug.
$3.79
Truck-Lite Stop/Turn/Tail PL-3 Stripped End/Ring Terminal Plug
For use with double contact sealed incandescent lamps. Built as an 11" 16 gauge
GPT wire with tin plated brass terminals. PL-3 stripped end and ring terminal
plug.
$2.49
Truck-Lite Stop/Turn/Tail Stripped End/Ring Terminal Plug
For use with double contact sealed incandescent lamps. Plug is a 11" of 16
gauge GPT wire with tin plated brass terminals.
$2.49
Custer Products Tow Light Extension Cable 4-Wire Male Connectors
Extension tow light cable assembly with male plugs on both ends. For use as
an extension for those "long loads."
$73.99
Truck-Lite Marker Clearacne Fit 'N Forget M/C .180 Bullet/Ring Plug
Keeps water, salt and other corrosives from LED lamps. Combine with LED lamps
for Lifetime Lighting Warranty eligibility. 5" 16 gauge GPT wire with tin
plated brass bullets/receptacles. Built as a Fit 'N Forget M/C .180 bullet
terminal and ring terminal plug.
$3.09
Maxxima 3-Pin Male / Male Electrical Grote Adapter
3 Pin Male to Male Grote Adapter Harness, from Maxxima.
$4.99
Truck-Lite Marker Clearance Stripped End/Ring Terminal Plug
Marker clearance plug is used in space limited areas. Built as a 7" 16 gauge
GPT wire with tin plated brass terminals.
$1.99
Truck-Lite Marker Clearance .180 Bullet/Ring Terminal Fit 'N Forget Plug
Keeps water, salt and other corrosives from LED lamps. 8" 16 gauge GPT wire;
tin plated brass terminals. The connector is a .180 bullet and ring terminal
Fit 'N Forget S.S. plug.
$2.79
Truck-Lite Marker Clearance PL-10 Right Angle Stripped End/Ring Terminal Plug
Right angle design for use in limited space areas. 6.5" 16 gauge GPT wire with
tin plated brass terminals. Built as a marker clearance PL-10 right angle plug
with a stripped end and ring terminal connection.
$2.79
Truck-Lite Stop/Turn/Tail PL-3 Fit 'N Forget Plug
Keeps water, salt and other corrosives from LED lamps. 8.5" 16 gauge GPT wire
with tin plated brass terminals. Built with PL-3 Fit 'N Forget connections.
$18.09
Truck-Lite Stop/Turn PL-2 Stripped End/Ring Terminal Plug
For use with single contact sealed incandescent lamps. Built as an 11" 16 gauge
GPT wire with tin plated brass terminals. PL-2 stripped end and ring terminal
plug.
$2.29
Truck-Lite Marker Clearance Female PL-10 Fit 'N Forget Plug
Keeps water, salt and other corrosives from LED lamps. Combine with LED lamps
for Lifetime Lighting Warranty eligibility. Used to Adapt LED lamps to
conventional plug harness systems. 4" 16 gauge GPT wire with tin plated brass
terminals. Built with Fit 'N Forget M/C and female PL-10 connections.
$5.09
Maxxima 3-Pin Male / Female Electrical Extension Harness
3 Pin Male/Female Extension Harness, from Maxxima.
$4.09
Power Up Products Resistor Load Kit (Pair)
Power Up Products resistor load kit produces the same draw as an incandescent
lamp. Set to flash at a rate determined by the direct current drawn by the
lamp load. Flashes at a rapid rate to indicate the burned out lamp. Each
resistor is rated to 30 watts. Mounting brackets included.
$34.99
Truck-Lite Marker Clearance PL-10 Stripped End/Ring Terminal
For use in space limited areas. 16 gauge GPT wire with tin plated brass
terminals. Built as a PL-10 stripped end & ring terminal plug.
$2.39
Race Sport Side Marker Light Box
Race Sport Universal Rectangular Light Cluster for round Side Marker
Lights, Stainless Steel or powder coated steel. This product is made of
high-quality materials to serve you for years to come. This product designed
using state-of-the-art technology.
$24.99
Maxxima Grey Mounting Bracket for M25302L
Introducing the Maxxima Grey Mounting Bracket for M25302L, the perfect solution for a DOT FMVSS 108 compliant 1-light system. This top-of-the-line mounting bracket offers a range of features designed to enhance your vehicle's lighting system.
$4.89
Truck-Lite Stop/Turn/Tail Fit 'N Forget S.S. Plug
Keeps water, salt and other corrosives from LED lamps. 8" 16 gauge GPT wire;
tin plated brass terminals. Female PL-3 Fit 'N Forget plug.
$7.19
MAXXIMA Adhesive Double-Sided Mounting Tape for M42205 Series Lights
3M double sided mounting tape.
$2.89
Maxxima 9" Medium Link for Linkable MSLS LNK Series Electrical Connector
Maxxima 9" Medium Link for Linkable MSLS LNK Series Electrical Connector for
use in tight corners or when additional length is needed. 12.8V DC Voltage, 11
A Amp Draw, 5 Year Warranty (Interior Application), 2 Year Warranty (Exterior
Application).
$6.19
Plug Adapter for 10256 Marker Light
Self sealing plugs keep water, salt and other corrosives from LED lamps. Single
plug w/.156 bullet and #6 ground terminal.
$6.99
Maxxima Head Light Load Equilizer Modules 36" Lead
Maxxima headlight load equilizer modules. Will work with 4" x 6" and 7" x 5"
lights.
$15.69
Maxxima 3" x 5" Rectangular Black Grommet
Rectangular Black Vinyl Grommet for Stop Tail Turn LED Lights and Back Up
Lights, by Maxxima. Rubber grommet for M42200R & M42200Y lights.
$2.39
Miller Tail Light Grommet 96500 and 95500
This tail light grommet fits the Century and Vulcan 16 Series LCG '09 to '14.
$7.99
Filter
1 - 40 of 40 items
