D-Rings & Tie Down Anchors

Weldable Grab Hooks are specially made to weld on to any flat surface that you need a place to hook a chain.

These Weld-On Grab Hooks from Buyers Products are perfect for use with safety chains. Just weld these hooks on to the back of your wheel grids, or anywhere else you need an extra hook.

Weld these D-Rings to your Wrecker, Carrier, or Trailer to assist you with all of your tie-down and hauling needs. Includes a weld-on mounting bracket made of AISI-1025 steel for 5/8" and AISI-1045 on 3/4" and 1".

This is a strong, weldable Grade 70 grab hook. With the ability to handle a working load limit of 11,300 pounds, check the drop-down menu for more information, the All-Grip Weldable Grab Hook is strong enough for your job. Plus this grade 70 hook comes in three sizes so you can find what you need.

This Keyhole Plate from Miller Industries has a Double Banjo Eye that will provide an additional tie-down point. The keyhole plate can be bolted or welded into place. This plate is 5-7/8" x 7-1/2" x 3/8" thick steel that will accept up to 3/8" chain. This part can be used to replace Part Number 12-0720078.

Weld these D-Rings to your Wrecker, Carrier, or Trailer to assist you with all of your tie-down and hauling needs.

These Bolt on D-Rings come with a two hole mounting bracket, which adds an extra tie down point without welding. The brackets are 1-5/8" wide and 3/16" thick with square mounting holes that accept 3/8" Carriage Bolts.

The Gunnebo-Johnson Anchor Hook allows you to weld onto any surface for an added anchor point. Spring-loaded latch is very strong, made from alloy steel, same as the hook. Welding instructions are supplied. Proof-tested and certified.

Bolt on Banjo Eyes make it easier to replace worn or broken chain tie downs. Used on aluminum or steel car carrier beds.

This Keyhole Plate from Miller Industries has a Banjo Eye that will accept 3/8" chain. This keyhole plate is perfect if you need to add a tie-down or replace an existing tie-down. This keyhole plate can be bolted or welded into place. This plate is 3-1/2" x 3-1/2" x 5/16" thick steel that will accept 3/8" chain.

This is a Car Carrier Approach Plate Kit from Miller Industries. It comes with four plates, and all of the hardware to attach. This hardware includes bolts, nuts and washers. The kit is used on aluminum or steel car carriers and it makes it easier to replace worn or broken chain tie downs.

The All-Grip Horizontal E Track 10' Pc is made of steel to ensure additional durability. Plus it is galvanized in order to prevent it from getting corroded.

Banjo Eyes provide Additional Tie Down Points

These handy banjo eyes are stamped from 5/16" material and will accept 5/16" chain. These are perfect if you need to add chain tie downs or if you are repairing or replacing your existing tie downs.

Versatile surface and recessed Rope Rings provide durable anchoring points to help keep cargo in place.

Double Banjo Eyes provide additional tie down points.

Zips Weldable Grab Hooks are specially made to weld on to any flat surface that you need a place to hook a chain.

Secure your load with confidence using this weld-on 1/2" forged D-ring from Buyers Products. The D-ring and 2" bracket feature C-1045 forged steel construction and offer a working load limit of 4,080 lb. D-rings are not approved for overhead use.

Buyers Products Bolt-On 5/8 Inch Forged D-Ring spreads the "pull" to the entire mounting plate instead of concentrating it on a single point. Its bolt-on design means you don't have to weld, so it's great for flat surfaces where welding is not an option. The 5/8 in. diameter D-ring comes with a forged mounting bracket welded onto a steel plate. A black powder-coated finish adds durability and corrosion protection. Mounting hardware and two back support bars are included. Be sure to check the capacity of the surface you are mounting prior to use.

The Heavy Duty Recessed Rope Ring from Buyers Products features high capacity holding power for your service body or other commercial work truck. It carries a working load limit of 2,000 lb. Designed for exterior use, this ductile iron rope ring is available with several mounting/finish options, including an optional back plate.

Made of high-strength steel, the forged steel heavy-duty D-ring with weld-on clip provides a durable and reliable tie-down method that will last for years. The D-ring can add versatility and options for utility trailer applications since it can be placed almost anywhere along your flatbed truck or trailer.

The Stake Pocket 1/2 Inch Forged D-Ring with 2-1/2 Inch I.D. from Buyers Products can be quickly drop-mounted into a stake body pocket as an anchor point for chains or straps.

Ancra's series E & A fitting with round ring is manufactured to provide you with a solid and reliable connection point for your tie-down hooks. Inserting the series E or A track fitting into the track only takes a few seconds. Once it clicks in, it provides a strong attachment point that you can trust to support the rest of the tie-down assembly. The gold chromate coated fitting is designed to resist rust and corrosion and is equipped with a durable 1-in. steel round ring that can mate with most tie-down hooks. Our series E & A fitting with round ring is sold as eaches in bulk cartons of 100.

Add extra tie down points by bolting or welding these Heavy Duty Flush Mounted D-Rings.

This forged D-ring from Buyers Products come with a U-shaped bracket so you can weld into place making them perfect for medium or heavy duty tie down anchors. Commonly used on the rails of large trailers for outside of the rail tie points. The lower half of the 1" dia. ring is formed at a 55? angle to extend from the mounting surface. Ring is supplied with a 2-1/8" wide forged mounting bracket.