Toolbox Repair Parts

This is a complete Latch assembly

This stainless steel Paddle Latch is for use with new style toolboxes that have a striker pin for a latch. The latch locks over the striker pin. This latch comes with a lock and is lockable by key, which is included.

Add some flash to your Zip's Custom Toolboxes with these custom trim piece. These trim pieces will give your toolbox a custom appearance with a professional finish. These stainless steel Zip's Custom trim pieces get mounted to outside of the Zip's Custom toolbox with double sided 3M tape.

This is a positive locking latch from Buyers Products. This latch is lockable by key and is made from stainless steel. It will fit most underbody toolboxes. Mounting holes, included gasket, and flush-mount design provide a snug installation. The cam adjusts from 1-1/4 in. to 2 in. to accommodate varying door thicknesses. The latch is shaped and sized to accommodate standard-size cut-outs.

Buyers Products Replacement Lock Cylinder with Key for Buyers Products Truck Box Latches fits the following Buyers Products latches (see "Related Products" below for more information): L1883, L1980, L8815, L8816, L8816R, L8825, L8835, L8855, L8915, LL9000, and LL90003.

This is a Jerr-Dan latch, it is an ergo t-handle. It is for the driver's side.

18" Lanyard Cable is a replacement part for In The Ditch Pro Series Toolboxes. When installed on each end of a toolbox, the door in its open position is capable of holding 400 lbs.

This Hansen Door Latch from Miller Industries is used on the Body Assembly Toolbox Doors of Century 1040B / SDU3 Wreckers. The latch replaces your new style push button latch. See the brochure tab for breakdowns.

Latch Handle Only

This Replacement Lock Cylinder with Key from RC Industries fits standard T-handles on truck storage tool boxes. The cylinder is designed to fit below the handle and comes with two keys.

This stainless steel rotary style latch from Miller Industries is used on the new style toolboxes with a striker pin for a latch. It comes with a lock and key. This part can be used to replace part number 9048750. This latch uses striker part number 12-0803703 and gasket part number 12-0304425.

This Stainless Steel Paddle Latch from Buyers Products comes with keys included. This part can be used to replace Part Number MM-529.

Replacement Cylinder Lock and Key for Tri-Mark Latches.

This is a In The Ditch stainless steel replacement toolbox door panel.

Left Rotary Latch (Fits All Models) Serial # 500657 or newer,

RC Industries Anchor Latch Pawl Kit

This is a replacement T-Handle Latch from Buyers Products. This latch is powder coated and has a chrome handle.

Close up any gaps on your truck's storage compartments with a new door seal kit from Buyers Products. The system includes enough material to seal up any 24" to 60" toolbox.

This replacement Latch from Hanson is typically used on Century Heavy Duty Wreckers. It is made from aluminum and has a lock over striker pin. The latch is lockable with the provided key.

Buyers Products Standard Size Flush Mount Non-Locking Paddle Latch is a single point latch built to handle the demands of daily use. The non-locking, rectangular latch is designed to mount into a 3-3/8 in. by 4-5/8 in. recess and is available in rust-resistant steel (welded on) or stainless steel (bolted on).

Keep the doors on your storage boxes in good working order with replacement cables from Phoenix.

This is a replacement toolbox center bonded mount.

Latch mechanism and hardware for D-paddle latches for storage doors on Vulcan Heavy Duty wrecker bodies.

This 49" long stainless steel hinge is used on the 49" aluminum toolbox assembly of Chevron Car Carriers. These include Chevron 16, 20 and 30 Series Car Carriers. The hinge is used with the 49" Toolbox

Bolt on striker pin for new style striker type paddle latch

This is a replacement T-handle latch that will fit RC toolboxes. This latch is stainless steel which makes it resistant to rust.

Buyers Products Standard Size Rectangular Rotary Paddle Latch is a single-point rotary latch with installed gasket and is designed to handle the demands of daily use. Constructed from polished stainless steel, this rectangular latch has hidden studs to add an extra level of security. Simply close the latch and go, or use the included keys to lock it.

Toolbox Door Protector Trim Kit for All of The Side Doors On The Road Service Body.

This is a standard size 2 point T-Handle latch with mounting holes by Buyer's Products. This latch features 2 point construction and includes rods that make this latch a great option for long doors. This is a flush mounted latch that offers a smooth, perfessional look. It is corrosion resistant with mounting holes to make installation quick and easy.

Phoenix T-Handle Latch with a Stainless Steel Finish. Latch is Flush Mounted with a Right Hand Mounting Application. This Latch is Supplied with 2 Keys.

Ensure that the door on your truck's storage compartment doesn't open too far and prevent it from swinging back at you or falling down with a door check from Austin Hardware. This mechanism works great on utility bodies, and the spring tension adjusts from 15 to 30 lbs. to hold a variety of door sizes and weights.

Note: Special Handling Fees Apply

This is a Buyers hinge, it is stainless steel. Comes in 6' length only.

• This stainless steel hinge is sold per 6' piece.
• Product Dimensions: 72"L x 2"W x .35"H

This Replacement Key from Buyers Products is for the Buyers Cylinder

This is a universal lock cylinder and key CH501 from Allegis Corp.

This Cylinder and Key is from Buyers Products. It is a 39 Cylinder and a LL71 Key, they are both included in this order.

This is a latch lock clip works with (TM700).

This is the RC replacement toolbox door with the new latch with a black base.

This Stainless Steel Paddle Latch for Jerr-Dan toolboxes holds up well to the elements.

Buyers Products Tall Flush Mount T-Handle Latch with Blind Studs comes with a lock and key set installed, and gasket. The latch is constructed from stainless steel for durability and corrosion-resistance, and features a durable, folding T-handle. Blind studs, included gasket, and flush-mount design provide for a water-tight installation. The cam can adjusts from 1-1/4 in. to 2 in to accommodate varying door thicknesses. The latch is shaped and sized to accommodate tall T-handle cut-outs, and many Buyers Products rotary paddle latch cut outs.

Buyers Product Standard Size Flush Mount T-Handle Latch with Blind Studs comes with a lock and key set installed, and gasket. The latch is constructed from stainless steel for durability and corrosion-resistance. Blind studs, included gasket, and flush-mount design provide for a water-tight installation. The cam can adjust from 1-1/4 in. to 2 in to accommodate varying door thicknesses. The latch is shaped and sized to accommodate most common cut-outs.

This replacement Latch from Hanson is typically used on Century Heavy Duty Wreckers. It is made from aluminum and has a lock over striker pin. The latch is lockable with the provided key. ***New style lighted handle***

Phoenix toolbox latch with key 01 crome handle and blakc Hansen housing

Includes cylinder with dust cover, key, straight cam, and clip.

This is a Locking Cylinder nut works with (TM700).

Mount this Grab Pull Handle anywhere on your truck or trailer where an extra handhold is needed. Comes with four pre-drilled holes to accept 1/4"-dia. nuts and bolts (not included). 13"L x 1/2" dia. with a 7"L x 1-9/16"D grab s

This Replacement Lock Cylinder with Key from Buyers Products fits standard and junior sized latches. The cylinder is designed to fit flush with the latch and comes with two keys.

Buyers Products Junior Flush Mount Rectangular Non-Locking Paddle Latch is a single point latch built to handle the demands of daily use. The non-locking, rectangular latch is designed to mount into a 2-3/4 in. by 3-3/4 in. recess and is available in rust-resistant steel (welded on) or stainless steel (bolted on).

Buyers Products Co. rods for a two or three point latch. Measures 34". Can purchase as each or as a pair.

Buyers Products Replacement Poly Underbody Flush Mount T-Handle Latch has four mounting studs to mount flush with the surface for a smooth and professional finish. The 3-point latch is constructed from polished stainless steel for maximum corrosion resistance. The roller cam adjusts from .25 in. to 1.6 in. to accommodate varying door thickness. The latch is designed to work on Buyers Products polymer underbody truck boxes and will not work with other truck boxes.

This 1/8" Gas Strut from Miller Industries is rated for 90 PSI. Gas Struts making lowering, lifting, moving and adjusting easier and safer. This strut is used on the toolbox assembly of Vulcan Wreckers. Please see the features below for a list of wreckers, and see the brochure tab for breakdowns.

Phoenix stainless steel door assembly for a steel toolbox. These style doors hinge about 1" away from the body.

These are replacement gas spring set of two.

Phoenix Lock and Key Cylinder for a T-Handle Latch.

Keep the working parts of the D-latch door handle on your truck's storage box free from moisture with this replacement foam gasket from Miller Industries.

Standard Paddle Latches are 4-1/4"W x 5-1/2"H and mount in a 3-3/8"W x 4-5/8"H recess. Junior Paddle Latches are 3-5/8"W x 4-3/4"H and mount in a 2-3/4"W x 3-3/4"H recess. BL9000 T-Handle Latch is 5-3/4"W x 6"H. TH800 T-Handle Latch is 4-3/4"W x 4-7/8"H x 2-1/8"D. BL8816 T-Handle Latch is 4-3/4"W x 5-1/2"H and mounts in a 3-3/4"W x 4"H recess opening.

This 49" Long Aluminum Hinge is used on the 49" Toolbox Assembly of Chevron Car Carriers. These include Chevron 16, 20 and 30 Series Car Carriers. The hinge is used with the 49" Toolbox

This Mini Hinge from Miller Industries is made of chrome. This old style hinge measures 2.5" x 2.5" x 1".