Free shipping is only valid on total purchases of $199 or more and ground shipments within the contiguous 48 states for products weighing less than 150 lbs. Special handling fees may be required for some products.Shipping fees will be added for all orders under $199 or that include oversized items or any item of 150 lbs or more. Please contact customer service if you have any questions.
These Hi-Amp Circuit Breakers are ideal for cranes, dump hoists, lift gates,
plows, spreaders, switch panels and power distribution panels. Choose from 50,
80, 100, or 150 Amp Circuit Breakers. These circuit breakers double as a master
disconnect as well. In the event of a "short circuit" the circuit breaker will
"trip" to the off position. Unlike an automatic reset, the manual version stays
open until it is manually reset. By pushing the reset button you can also
disconnect the entire system. This is extremely helpful when servicing the
electrical system.
3M Acrylic Foam Tape 4229P is a 0.76mm thick, medium-density, dark grey acrylic foam double sided adhesive tape with high performance acrylic adhesives. Double Sided Acrylic foam adhesive tape is grey with red polyethylene release liner. General purpose double sided adhesive tape with superior adhesive bonding strength for a wide variety of surfaces. Can be used to stick neodymium magnets to non-ferrous material surfaces like plastic, copper, stainless steel, wood, glass, tiles, concrete as these materials does not work directly with magnets. The acrylic foam of 0.76mm thick allows the adhesive to mould to slightly rough surfaces like concrete.
This 12 volt air compressor is a great way to prevent having to return home early from riding a dirt bike in your favorite remote location simply because you have a flat tire. Our 12 volt compressor can be a very useful tool for tire inflation, operating air tools, or many other camping, off-roading, or racing purposes. Can easily be stored in your toolbox, camper, or four-wheeler trailer.
LED Light Strips are ideal for compartment and cargo work spaces of trucks,
trailers, toolboxes, RV's and more. Space saving low profile design is 1/2"
wide and only 0.2" tall. Self adhesive backing for easy installation on any
surface. Includes clips and screws for alternate mounting. IP68 rated
completely sealed waterproof electronics. 12 volt DC.
Every year more fleet managers, tradesmen, and fire chiefs outfit their trucks
with Dri-Dek. Why? Because it works. Dri-Dek cushions equipment and when it
gets wet, the raised flow-through surface lets air flow for fast drying. It
stands up to oils, grease, alkalies and solvents. It supports the weight in any
climate without cracking or buckling. Installs in minutes, lasts for years.
Sold by square foot. Also available in 3'x4' Sheets
and 3'x12' Rolls. Complete your area with the Dri-Dek corner and edge pieces to
smooth and round out your full body mat.
Temflex vinyl insulating electrical tape. It is flame retardant, lead free,
cold and sunlight resistant, suitable for use at not more than 600V and not
more than 80?C (176?F).
This Axle Slide Tunnel Box Mount from In The Ditch has become a best seller. This mount is easy to install and easy to use; just bolt the mount to the top of your tunnel box. Axles have a tab factory installed that fits the slot in the mount. All you do is start the axle into the mount, push across, and your axle automatically locks into place. This mount will hold two axles and one break over bar. Shop for your
These In The Ditch tow dollies hold up well against road grime, while the lightweight aluminum axle and ergonomic handle make it simple to maneuver on the recovery site. Bolt-on spindles are easy to replace with basic hand tools, and the speed-lube design (SLX) makes packing bearings effortless with a center grease zerk on this assembly. These dollies feature best in class capacity, and are available in powder coat black or zinc plated finish. They are also available with a tire size of 4.80 or 5.70.
In The Ditch now has Galvanized Steel Trash Cans. Made from galvanized steel, these trash cans are guaranteed to last for years. You can choose from a 6 gallon trash can or a 4 gallon trash can. Each of these sizes comes with a lid included. The 4 gallon trash can and lid can be used to replace miller part number 124002700.
In The Ditch's Trash Can Mounts are made from aluminum and can be easily
mounted to the deck of a wrecker or any flat surface. You can choose from
either a 4 gallon trash can mount or a 6 gallon trash can mount. Both are made
from 1/8" thick aluminum and are easy to install with pre-drilled mounting
holes. These mounts do not include a trash can or the bungee cords. Shop for
your new
This Universal Mount system is a perfect choice for those wanting a low profile all-in-one mount that holds a Speed Dolly frame, axle and break over bar. The Universal Mount uses the same bolt pattern that is pre-drilled in Jerr-Dan MPL, MPL40 and Element wrecker bodies but can be used on any brand wrecker body. The Kit comes complete with everything needed to hold 2 Dolly frames, 1 break over bar and 2 axles and comes in our Tuff Coat Black Finish. Pick from the Standard or the XD Mounts. The Standard Mount is made for 2 Speed Dollies with 4.80 Tires. The XD Mount is made for 2 XD Dollies with 5.70 Tires. Sold as set.
Fastenal 11.1" 50 lbs. tensile UV black nylon 6.6 Power Phase cable tie.
Cable ties secure wire bundles, harnesses and components quickly without
slipping. Sold Each (Individually)
Phoenix electrical junction blocks are high-quality, easy-to-use terminal
blocks that allow you to connect multiple electrical sources in your car,
truck, trailer, or RV. They feature a two-piece design and are available with a
range of poles to accommodate a variety of wiring requirements. These blocks
ensure that your wires stay in place and don't contact other leads, keeping all
of your electrical devices organized and safe from short circuiting.
Phoenix QuickTrim Stainless Steel Single Rear Axle Hub Cover Kit for Medium Duty
Trucks.10lug on 285mm bolt. Hub Cover is 6.25" Diameter Axle with 2.88" Long spinner bolt and bracket which mounts under two axle end plate nuts on 5.25" and 5.5" bolt circle axle end plates.
B/A Products tarp straps are a quick and easy way to secure items in place.
These straps are sold as individuals of various lengths. Made from
Ethylene Propylene Diene Monomer (EPDM), these tarp straps offer excellent
resistance ozone, acids and bases and are ideal for hot climates and for summer
use in all climates where they will be exposed to heat and sunlight.
This replacement Latch from Hanson is typically used on Century Heavy Duty
Wreckers. It is made from aluminum and has a lock over striker pin. The latch
is lockable with the provided key.
Buyers Products Standard Size Flush Mount Non-Locking Paddle Latch is a single
point latch built to handle the demands of daily use. The non-locking,
rectangular latch is designed to mount into a 3-3/8 in. by 4-5/8 in. recess and
is available in rust-resistant steel (welded on) or stainless steel (bolted
on).
This stainless steel Paddle Latch is for use with new style toolboxes that have
a striker pin for a latch. The latch locks over the striker pin. This latch
comes with a lock and is lockable by key, which is included.
This is a positive locking latch from Buyers Products. This latch is lockable
by key and is made from stainless steel. It will fit most underbody toolboxes.
Mounting holes, included gasket, and flush-mount design provide a snug
installation. The cam adjusts from 1-1/4 in. to 2 in. to accommodate varying
door thicknesses. The latch is shaped and sized to accommodate standard-size
cut-outs.
This Hansen Door Latch from Miller Industries is used on the Body Assembly
Toolbox Doors of Century 1040B / SDU3 Wreckers. The latch replaces your new
style push button latch. See the brochure tab for breakdowns.
This stainless steel rotary style latch from Miller Industries is used on the
new style toolboxes with a striker pin for a latch. It comes with a lock and
key. This part can be used to replace part number 9048750. This latch uses
striker part number 12-0803703 and gasket part number 12-0304425.
This replacement Latch from Hanson is typically used on Century Heavy Duty
Wreckers. It is made from aluminum and has a lock over striker pin. The latch
is lockable with the provided key.
Buyers Products Standard Size Flush Mount Non-Locking Paddle Latch is a single
point latch built to handle the demands of daily use. The non-locking,
rectangular latch is designed to mount into a 3-3/8 in. by 4-5/8 in. recess and
is available in rust-resistant steel (welded on) or stainless steel (bolted
on).
This stainless steel Paddle Latch is for use with new style toolboxes that have
a striker pin for a latch. The latch locks over the striker pin. This latch
comes with a lock and is lockable by key, which is included.
This is a positive locking latch from Buyers Products. This latch is lockable
by key and is made from stainless steel. It will fit most underbody toolboxes.
Mounting holes, included gasket, and flush-mount design provide a snug
installation. The cam adjusts from 1-1/4 in. to 2 in. to accommodate varying
door thicknesses. The latch is shaped and sized to accommodate standard-size
cut-outs.
This Hansen Door Latch from Miller Industries is used on the Body Assembly
Toolbox Doors of Century 1040B / SDU3 Wreckers. The latch replaces your new
style push button latch. See the brochure tab for breakdowns.
This stainless steel rotary style latch from Miller Industries is used on the
new style toolboxes with a striker pin for a latch. It comes with a lock and
key. This part can be used to replace part number 9048750. This latch uses
striker part number 12-0803703 and gasket part number 12-0304425.