Free shipping is only valid on total purchases of $199 or more and ground shipments within the contiguous 48 states for products weighing less than 150 lbs. Special handling fees may be required for some products.Shipping fees will be added for all orders under $199 or that include oversized items or any item of 150 lbs or more. Please contact customer service if you have any questions.
Tow lights take a lot of abuse. Keep them looking and working like new with replacement parts from Zip’s AW Direct. We stock new poly housing shells for most sizes of tow lights as well as the stop/tail/turn light assemblies so your tow lights can continue to perform the way they were intended. We also carry replacement transmitters and wiring as well as magnetic mounts and rubber boots.
These Rubber Boots from TowMate are the perfect fit for your TM-MAG90 magnet.
It provides your TM-MAG90 magnet with a reliable scratch proof mounting option
for your wireless tow lights.
This Standard 4-PIN Round Transmitter from TowMate is used on TowMate Tow
Lights that do not use an external antenna. This transmitter does not have an
antenna and the electronics are injection molded to ensure that it will resist
the elements. If you are purchasing a transmitter for an existing light, you
will want to match the wire colors of the transmitter and receiver. A red wire
indicates the newest and most current series of electronics & will work with
the I-MON monitor; a green wire indicates an older style prior to the series of
electronics (Doesn't work with I-MON). Please check your wire, and choose your
color before ordering. Not sure which transmitter you need give one of our
Customer Services Reps a call @ (800) 222-6047 and they will be able to get you
what you need.
Extension tow light cable assembly for use with tow light bars or as an
extension for those "long loads." Use with tow light bar part number(s) 1100,
1100P, 1110, and 1100P-48.
This Standard 7-PIN Round Transmitter from TowMate is used on TowMate Tow Lights that do not use an external antenna. This transmitter does not have an antenna and the electronics are injection molded to ensure that it will resist the elements. If you are purchasing a transmitter for an existing light, you will want to match the wire colors of the transmitter and receiver. A red wire indicates the newest and most current series of electronics, and a green wire indicates an older style prior to the series of electronics. Please check your wire, and choose your color before ordering.
This is a Zip's Custom Towlight Hanger Bracket. You are able to store your
towlight when it is not in use. With this bracket you are able to customize
your toolbox by efficiently utilizing the space in your toolbox. This towlight
hanger bracket is designed to be used on the heavy duty wreckers.
This Suction Cup Kit from TowMate provides you with a conversion from magnetic
to suction cup base for tows requiring you to mount to a non-magnetic surface.
These fully adjustable suction cups provide a solid hold with their
press-and-lock base.
This Rocker Switch from TowMate I used on lighting systems and can easily
control your non Power-Link lights. Install into your dash along with the
existing controls for clean, factory look.
This Standard 7-PIN RV Style Transmitter from TowMate is used on TowMate Tow Lights that do not use an external antenna. This transmitter does not have an antenna and the electronics are injection molded to ensure that it will resist the elements. If you are purchasing a transmitter for an existing light, you will want to match the wire colors of the transmitter and receiver. A red wire indicates the newest and most current series of electronics, and a green wire indicates an older style prior to the series of electronics. Please check your wire, and choose your color before ordering.
This Standard Hardwired Transmitter from TowMate is used on TowMate Tow Lights that do not use an external antenna. This transmitter does not have an antenna and the electronics are injection molded to ensure that it will resist the elements. A hardwire transmitter can be hardwired into your tow light so you do not have to plug it in every time. If you are purchasing a transmitter for an existing light, you will want to match the wire colors of the transmitter and receiver. A red wire indicated the most current series of electronics, and a green wire indicates an older style prior to the series of electronics. Please check your wire, and choose your color before ordering.
Prevent scratches to customers' vehicles when using tow lights with these Rubber Magnet Boot Covers. Made from heavy-duty rubber, these covers fit all 3" to 3-1/4" dia. round magnets.
Replace any damaged or misplaced end caps on your TowMate Tow Lights with this
Black End Cap. This end cap can be used on TM2,TM22, TM21, TL31, TL48, or TM360
lights. End caps from TowMate are also available in Clear with Red LED
for side marker illumination.
Towmate's iMon Monitoring System- You will never have to worry about losing your
lights again with this easy to use interactive monitoring System. Operates with
any system equipped with iMon electronics. Purchase with a new unit or upgrade
your existing one easily to work with the iMon.
Monitor the functions of your light bar (LEFT TURN, RIGHT TURN, STOP, and
HAZARDS), be alerted when you leave your light bar behind (signal Strength from
wireless light bar), and monitor the battery level of your light bar all with
one easy to use device. Simply plug your iMon into your vehicles cigarette
lighter and be 100% aware of your wireless light bar abilities and location.
Towmate's "Short Range Monitor" can be mounted in the TM2 towlight to monitor
the signal. If the signal is lost then an alarm will sound to alert you of your
towlight not working properly or you have left it on the vehicle you just
towed.
These powerful 90 lb. pull magnets are all you need to secure your wireless tow light to the load you are hauling. They do not come with a rubber boot for anti-scratch protection.
This powerful 105 lb. pull magnet is all you need to secure your wireless
tow light to the load you are hauling. It comes with a protective rubber layer
to ensure that the magnet will not scratch the vehicles finish while in use.
Replacement round magnet assembly for the ZIP-10 or ZIP-10LED tow lights which
use the rubber housing truck-light style bulb. This is a 90 lbs. pull magnet
and includes the 3-1/8" magnetic base and an attached bracket.
This Standard 6-PIN Round Transmitter from TowMate is used on TowMate Tow Lights that do not use an external antenna. This transmitter does not have an antenna and the electronics are injection molded to ensure that it will resist the elements. If you are purchasing a transmitter for an existing light, you will want to match the wire colors of the transmitter and receiver. A red wire indicates the newest and most current series of electronics, and a green wire indicates an older style prior to the series of electronics. Please check your wire, and choose your color before ordering.
This is a stick on pad that goes on the bottom of the 100 lb. magnets on your
tow lights from TowMate. This pad helps prevent scratches and other damage
from the tow light.
Charge your battery quickly and safely with this automatic "smart" charger. This Wall charger will never harm or over charge your battery. Keep your battery conditioned with the float mode; once the battery is fully charged, the charger starts float mode which provides a small amount of current to keep your battery healthy and ready to provide you hours of power.
Vinyl covered metal pads allow your magnetic base tow lights to be used on a
vehicle with aluminum or composite hoods, deck lids, or body panels. Secure
by closing window, door, or deck lid. May be used with Zip's tow lights part
numbers SL-9, ZIP-10, or ZIP-10LED.
These powerful 100 lb. pull magnets from TowMate are all you need to secure
your wireless tow light to the load you are hauling. Fitted with a protective
rubber layer, these magnets will not scratch the vehicles finish while in use.
Adhesive backed scratch resistant pad for round magnets. This pad will minimize
the accumulation of rust around the magnet from scratching your customers
vehicle. The LMMC wil| fit the ZIP-10 or ZIP-10LED tow light kits or round
magnet part number 1160R.
These rubber boots help protect the paint of your vehicle by attaching to
magnetized Towmate lights. The rubber boot serves as a buffer between your
vehicle and the magnet. For 100-lb. magnets.
This Toggle Switch from TowMate works on your lighting systems and easily
controls your non Power-Link lights. Install into your dash with your existing
controls for a clean, factory look.
This Standard 4-PIN Flat Transmitter from TowMate is used on TowMate Tow Lights that do not use an external antenna. This transmitter does not have an antenna and the electronics are injection molded to ensure that it will resist the elements. If you are purchasing a transmitter for an existing light, you will want to match the wire colors of the transmitter and receiver. A red wire indicates the newest and most current series of electronics, and a green wire indicates an older style prior to the series of electronics. Please check your wire, and choose your color before ordering.
Kits feature (2) 4" stop/tail/turn lights, rubber housings to absorb road shock, magnetic bases, a 30'L cable with plug and a plastic storage case. Tow lights and magnets are also available separately (see chart).