Lighting

Rubber grommets help eliminate risk of wire, cord or hose chaffing on applications due to metal drill holes or cutouts. Each rubber grommet is flexible and allows for simple installation by easily snapping the rubber grommet directly into the drill hole. Effective and easy to use rubber grommets ensure your wiring projects and applications are protected and last longer.

Rubber GrommRubber grommets help eliminate risk of wire, cord or hose chaffing on applications due to metal drill holes or cutouts. Each rubber grommet is flexible and allows for simple installation by easily snapping the rubber grommet directly into the drill hole. Effective and easy to use rubber grommets ensure your wiring projects and applications are protected and last longer.

These Rubber Boots from TowMate are the perfect fit for your TM-MAG90 magnet. It provides your TM-MAG90 magnet with a reliable scratch proof mounting option for your wireless tow lights.

This sealed lead acid battery runs up to 10 hr. on a single charge. Replaces the battery for TM21/ TM22G.

This Standard 4-PIN Round Transmitter from TowMate is used on TowMate Tow Lights that do not use an external antenna. This transmitter does not have an antenna and the electronics are injection molded to ensure that it will resist the elements. If you are purchasing a transmitter for an existing light, you will want to match the wire colors of the transmitter and receiver. A red wire indicates the newest and most current series of electronics & will work with the I-MON monitor; a green wire indicates an older style prior to the series of electronics (Doesn't work with I-MON). Please check your wire, and choose your color before ordering. Not sure which transmitter you need give one of our Customer Services Reps a call @ (800) 222-6047 and they will be able to get you what you need.

TowMate Towlight Standard (6') cigarette lighter charge cord charges any TowMate wireless light that has the small silver DC charging port.

This three-prong, right angle clip pigtail provides power connection for sealed lights, specifically combination stop, turn and tail lights. The red and black lead wires are bare for making power connection. Red is turn signal, and black is tail signal. The white ground wire has #10 ring terminal at the end.

Rubber grommets help eliminate risk of wire, cord or hose chaffing on applications due to metal drill holes or cutouts. Each rubber grommet is flexible and allows for simple installation by easily snapping the rubber grommet directly into the drill hole. Effective and easy to use rubber grommets ensure your wiring projects and applications are protected and last longer.

Extension tow light cable assembly for use with tow light bars or as an extension for those "long loads." Use with tow light bar part number(s) 1100, 1100P, 1110, and 1100P-48.

Stainless Steel Grommet cover for M09300 Clearance Marker Series, by Maxxima.

The solid state flange assembly will be made of a grey polycarbonate then incased in a chrome plated finish or a black finish. The M6FC and the M6FB shall have the ability to surface mount any M6 Super-LED series warning lights. The M6 series warning light is sold separately.

This replacement Grommet Kit will house a 2-1/2" Round Marker Light. The kit includes a grommet and plug-in.

Plug socket contacts complete the electrical connection of the AT Series plug housing assembly. There are three different quality grades of contacts available. All feature a copper alloy base with a standard stamped/formed nickel plate, military solid crimp nickel, or gold-plate.

This Standard 7-PIN Round Transmitter from TowMate is used on TowMate Tow Lights that do not use an external antenna. This transmitter does not have an antenna and the electronics are injection molded to ensure that it will resist the elements. If you are purchasing a transmitter for an existing light, you will want to match the wire colors of the transmitter and receiver. A red wire indicates the newest and most current series of electronics, and a green wire indicates an older style prior to the series of electronics. Please check your wire, and choose your color before ordering.

6" Oval Black Vinyl Grommet for Standard Oval Stop Tail Turn LED Lights and Back-Up Lights, by Maxxima.

Lens for MX7000 upper outboard lights.

Option of amber or clear bulb.The Neutral White, High Intensity 12V, 180 Degree Illumination Landscape, Park Light, Number, License Plate Light, Trunk Light, Instrument/Gauge Light, Side Light 35 x Longer Life Time Compared with Traditional Incandescent Bulbs. Plus Less Heat Output and Extremely Low Power Consumption.

2.5" Chrome Plastic Grommet Cover for Clearance Markers, by Maxxima.

Replacement sealed lead acid battery for standard heavy duty Towmate Wireless Tow bars- Fits TM36/ TM48.

Oval cabinets are designed for standard 6 1/2" lights and round cabinets are designed for standard 4" lights. We offer single, double, and triple sized lighting cabinets with options of finish. Lightboxes are available in stainless steel, black powder coated steel, diamond tread aluminum and smooth.

This is a Zip's Custom Towlight Hanger Bracket. You are able to store your towlight when it is not in use. With this bracket you are able to customize your toolbox by efficiently utilizing the space in your toolbox. This towlight hanger bracket is designed to be used on the heavy duty wreckers.

These are Continuous Wire Harness Rolls, by Maxxima. These Harnesses come with various connects an different length leads. These light harness leads are sold as each. Enter the number of leads into the quantity field then add to your cart.

Rubber grommets help eliminate risk of wire, cord or hose chaffing on applications due to metal drill holes or cutouts. Each rubber grommet is flexible and allows for simple installation by easily snapping the rubber grommet directly into the drill hole. Effective and easy to use rubber grommets ensure your wiring projects and applications are protected and last longer.

This is a replacement 3/4" light grommet by Sadler Power Train. This grommet works with part number M09300.

Standard 6" Oval Chrome Plastic Grommet Cover for M50600-B, by Maxxima.

This grommet will fit any 2-1/2" round marker light.

This Suction Cup Kit from TowMate provides you with a conversion from magnetic to suction cup base for tows requiring you to mount to a non-magnetic surface. These fully adjustable suction cups provide a solid hold with their press-and-lock base.

This Rocker Switch from TowMate I used on lighting systems and can easily control your non Power-Link lights. Install into your dash along with the existing controls for clean, factory look.

This Standard 7-PIN RV Style Transmitter from TowMate is used on TowMate Tow Lights that do not use an external antenna. This transmitter does not have an antenna and the electronics are injection molded to ensure that it will resist the elements. If you are purchasing a transmitter for an existing light, you will want to match the wire colors of the transmitter and receiver. A red wire indicates the newest and most current series of electronics, and a green wire indicates an older style prior to the series of electronics. Please check your wire, and choose your color before ordering.

This is a set of replacement light bar fold down brackets by Miller Industries.These brackets will fit the tube style pylons for small wreckers. To shop forthe replacement pin this bracket uses, click

This Standard Hardwired Transmitter from TowMate is used on TowMate Tow Lights that do not use an external antenna. This transmitter does not have an antenna and the electronics are injection molded to ensure that it will resist the elements. A hardwire transmitter can be hardwired into your tow light so you do not have to plug it in every time. If you are purchasing a transmitter for an existing light, you will want to match the wire colors of the transmitter and receiver. A red wire indicated the most current series of electronics, and a green wire indicates an older style prior to the series of electronics. Please check your wire, and choose your color before ordering.

This is a replacement 4-up center LED module for a 21TR and 21TRP light bar.This is used on Torus style modules. This module is amber in color.

Lens for MX7000 upper center lights.

Replacement Lens

This is a replacement 4-up center LED module for a 21TR and 21TRP light bar.This is used on Torus style modules. This module is red in color.

4" Round 35 watt sealed beam flood light bulb with screw terminals. This part can be used to replace Part Number 12-0304152.

Standard Rectangular Chrome Plastic Grommet Cover for M49700, by Maxxima.

This is a direct replacement strobe tube for the new Whelen 9004-WB Corner Strobe.

4" Round 35 watt sealed beam flood light bulb with spade terminals.

2.5" Round Black Vinyl Grommet for Clearance Markers, by Maxxima.

Prevent scratches to customers' vehicles when using tow lights with these Rubber Magnet Boot Covers. Made from heavy-duty rubber, these covers fit all 3" to 3-1/4" dia. round magnets.

2 Pin Clearance Marker Connector, from Maxxima.

Replacement LED Light Module

Replace any damaged or misplaced end caps on your TowMate Tow Lights with this Black End Cap. This end cap can be used on TM2,TM22, TM21, TL31, TL48, or TM360 lights. End caps from TowMate are also available in Clear with Red LED for side marker illumination.

Towmate's iMon Monitoring System- You will never have to worry about losing your lights again with this easy to use interactive monitoring System. Operates with any system equipped with iMon electronics. Purchase with a new unit or upgrade your existing one easily to work with the iMon. Monitor the functions of your light bar (LEFT TURN, RIGHT TURN, STOP, and HAZARDS), be alerted when you leave your light bar behind (signal Strength from wireless light bar), and monitor the battery level of your light bar all with one easy to use device. Simply plug your iMon into your vehicles cigarette lighter and be 100% aware of your wireless light bar abilities and location. Towmate's "Short Range Monitor" can be mounted in the TM2 towlight to monitor the signal. If the signal is lost then an alarm will sound to alert you of your towlight not working properly or you have left it on the vehicle you just towed.

ECCO provides a replacement 21 & 27 Series lens clips.

These powerful 90 lb. pull magnets are all you need to secure your wireless tow light to the load you are hauling. They do not come with a rubber boot for anti-scratch protection.

Replacement 21TRP Flasher Board.

Power Up Products resistor load kit produces the same draw as an incandescent lamp. Set to flash at a rate determined by the direct current drawn by the lamp load. Flashes at a rapid rate to indicate the burned out lamp. Each resistor is rated to 30 watts. Mounting brackets included.

Replacement sealed lead acid battery for Towmate Wireless Medium Duty Tow bars for SPR16/SPR25/TM25.

This is a clear replacment halogen bulb form Whelen.

This is a 22" LED Light Strip that fits TowMate Wireless Light Bars. This upgraded light lens includes the receiver board built in.

This is a replacement 2 wire round LED light for the control box on car carrier by Miller Industries.

This 7-PIN plug from TowMate is used to charge Heavy Duty Tow Lights TM36 and TM48.

Universal 21 Series Front/Rear TR3 Red Replacement LED Module (EZ21CC3R) by ECCO?. TR3. Centrally controlled, this module is used on Torus Style Modules. This product is made of high-quality materials to serve you for years to come. Designed using state-of-the-art technology and with customers in mind. It will meet your needs and deliver great quality at an affordable cost.

Replacement LED PAR 46 lamp for Unity LED Post- and Roof-Mount Spotlights. Hard-coated, polycarbonate, sealed lens and an anodized aluminum die cast reflector. Screw terminal design fits model S6 and S04 roof lights, spotlights and deck lights.

The Ecco EZ1202 12+ Series light bar controller is an optional in-cab advanced control pad. This offers convenient control of the light bar's built in flash patterns and features with soft touch buttons and LED function indicator lights.

ECCO front/rear TR3 LED module for 21 series lights.

AT Series receptacle housings are considered to be the female end sealed connector of the AT series connector setup. The housings are made from a thermoplastic material that is durable and UV-resistant. Each receptacle includes a silicone elastomer wire seal to help prevent environmental ingress.