Wear Pad Kits

This is an inner tube slide pad for the top side of the wheel lift on all Century, Vulcan, Champion, & Challenger car carriers excluding the LCG Series. It is also compatible on Vulcan 810 Intruders and Century 411/412 & Midnight Express. See Features for quantities for each model needed. Each pad sold separately.

Replace the worn-out bed locks on your Jerr-Dan Standard Duty Car Carrier with one of these new blocks.

This Slide Pad from Miller Industries is used in the wheel lift, underlift, and tower assemblies of several Century, Challenger, and Holmes wreckers. This slide pad measures 7" long, 3" tall, and 3/8" wide.

This is a nylatron wear pad by Miller Industries. It measures 6" x 1-1/2" x 3/8". It will fit the following wreckers: Century Modular Express 300 Series, Modular Midnight Express, Modular 211, Modular 400 & 600 Series, Holmes 440SL, 600R, Vulcan Modular 804, Modular 806, Modular 807, 812 Intruder, Modular 880/890, and 896/897. See Features for related parts and Brochures for reference charts.

This is the outer tube slide pad for the bottom, inside of the wheel lift on the Vulcan 810 Intruders & Century Midnight Express. See Brochures for reference chart. Each pad sold separately.

Note: Special Handling Fees Apply

This is a Bearing Pad Kit by Miller Industries. It includes all the parts necessary to replace the wear pads on a 21' Steel Car Carrier prior to 2010. See Features for a list of parts that are included.

• (6) 12-0306007 1/4"x1 1/4"x54" Bearing Pads
• (2) 12-0306009 5/16"x1 1/4"x60" Bearing Pads
• (2) 12-0306032 1/4"x1 1/4"x11 1/4" Bearing Pads
• (2) 12-0306108 1/4"x1 1/4"x49 3/4" Bearing Pads
• (44) 12-0400367 1/4-20 Nylon Lock Nuts
• (44) 12-0403009 1/4-20x1" Hold Down Screws
• (10) 12-0403010 1-4-20x5/8" Self-Tapping Screws

This is a wheel lift wear pad for the inside, bottom of the outer stinger on Vulcan 800 Series Wreckers by Miller Industries. This wear pad will fit on the following models: Vulcan Modular 880/890, 880/890, 806, 896/897. See Features for related parts and Brochures for reference charts. This part can be used to replace Part Number, 9100112.

This is the cage plate of the wheel lift on the Vulcan 804/806/807, Century 211/300 Series, and Holmes 440SL by Miller Industries. They are located on the top, inside of the outer stinger. See Brochures for reference chart.

This is an inner & outer tube bearing pad for the wheel lift of a Century or Vulcan LCG Series car carrier. There are a total of 4 bearing pads for each equipped wheel lift. See Features for which years/models they are used on.

These are the spacer bars of the wheel lift on many light duty wreckers and a few medium duty wreckers by Miller Industries. They are located on the top, inside of the outer stinger and the top, outside of the inner stinger. These spacer bars will fit the following wreckers: Century Modular Express 300 Series, Modular Midnight Express, Modular 211, Modular 400 & 600 Series, Holmes 440SL, 600R, Vulcan Modular 804, Modular 806, Modular 807, 812 Intruder, Modular 880/890, and V-30. See Brochures for reference charts. Each pad is sold separately.

This is an inner tube slide pad for the top side of the auto-grip wheel lift option on the Century 12 & 16 Series LCG Generation II Car Carrier. Each pad sold separately.

This is a wheel lift wear pad for the outside, top of the inner stinger on Vulcan Modular 807, Modular 880/890, 806, 880/890, 896/897 Wreckers and also on the Century Express Modular 300 Series Wreckers by Miller Industries. See Features for related parts and Brochures for reference charts.

This Bearing Pad from Miller Industries is used on the outer boom of wheel lift and slide-in tire restraint assemblies of Miller Car Carriers. These include Century, Challenger, Champion, Holmes, and Vulcan Carriers. The Bearing Pad measures 6-3/8" long, 4" tall, and 3/8" thick. Please see the brochure tab for a list of breakdowns.

Wear Pad Kit, Vulcan 880 & 890 wheel lifts. Upper and Lower wear pads. Kit includes (1)

This is a Jerr-Dan Wheel Lift Wear Pad for the Inner Wheel Lift Boom. The dimensions of this wear pad are, 5.94" L x 3" W x .38" H.This wear pad is used on the Jerr-Dan HPL-30 and HPL-60 Wreckers.

This Slider Pad from Miller Industries is an inner tube slide pad for the bottom side of the wheel lift on Century, Challenger, Champion, Holmes, and Vulcan car carriers and wreckers. The pad measures 3" long, 2-3/8" tall, and 3/16" wide. Please see the brochure tab for a full list of breakdowns.

Note: Special Handling Fees Apply

This is a 96" long subframe bearing pad by Miller Industries. It is one of the replacement pads for a 2010 or newer 10 Series Car Carrier. This part is included in the Bearing Pad Kit 12-0940278.

• 5/16"x96" Subframe Pad
• 2010 & Newer 10 Series Car Carriers

These are the wear pads for the inner and outer booms of the wrecker. These Wear Pads will fit the following wreckers by Miller Industries: Century Express 300 Series, EB4 Express, EB4 6500, Modular Express 300 Series, Formula I, Duplex Tilt 411 & 412, Formula 6500 - 600 Series, Midnight Express, Challenger Express 4300 Series, 4700 Series, 4800 Series, Holmes 440 Series, DFT 400, HP 552, DFT 650, and Vulcan Modular 806 and 807. See Brochures for reference chart . Each Wear Pad sold separately.

This is an outer tube Spacer pad for the wheel lift the Century and Vulcan car carriers. It is a spacer pad for (2) Bearing Pads (Part# 12-0750505) mounted on the inside of the outer tube on the wheel lift.

This is a spacer bar that is located on the top, inside of the wheel lift outer stinger weldment by Miller Industries. This spacer bar will fit on the following wreckers: Vulcan 880/890, 805, 806, Modular 880/890, 896/897. See features for related hardware and see brochures for reference charts.

This 2-1/4" Slide Pad from Miller Industries is used on the outer tube Boom/Wheel Lift Assembly of Several Miller Wreckers.

Top wear pads for the underlift of a Vulcan V60 or V70 wrecker.

This is a Bearing Pad Kit by Miller Industries. It includes all the parts necessary to replace the wear pads on a 21' & 22' Aluminum Car Carrier. See Features for a list of parts that are included.

This is a wheel lift wear pad bar for the outer stinger on light duty Vulcan wreckers by Miller Industries. There are 2 wear pads per wheel lift and they are located on the upper, outside portion of the stinger. The Vulcan models this wear pad will fit are: Vulcan Modular 880/890, 880/890, 805, 896/897. See Brochures for reference charts.

This is a bearing pad by Miller Industries. It is one of the replacement pads for the bed of many different car carriers. See Features for dimensions and models it is equipped on. This part can be used to replace part number 12-0306108. This part is included in the following Bearing Pad Kits:

This is a replacement spacer pad that bolts to the underside of the underlift boom to help the boom slide in and out efficiently. This pad is used on Century and Challenger heavy duty wreckers by Miller Industries. To view specific models this pad fits see Features below. To view the part schematics click on the Brochure tab.

This is a 216" long bearing pad by Miller Industries. This is a full length slide-in type pad that inserts into the groove in the aluminum sub-frame. It is one of the replacement pads for all 17'6" & 19' Aluminum Car Carriers. This part is included in Bearing Pad Kits:

Bottom wear pads for the underlift on a Vulcan V60 or V70 wrecker.

Note: Special Handling Fees Apply

This is a replacement spacer pad for the second stage of the underlift boom on Century and Challenger heavy duty wreckers by Miller Industries. This pad bolts to the underside of the underlift boom. It helps slide the boom in and out efficiently. It also catches on the wear pad mounting bracket of the next stage of the underlift boom to slide that section out. To view specific models this spacer pad fits see Features below. To view the part schematics click on the Brochure tab.

This is a wheel lift wear pad for the lower tilt column on Holmes and Vulcan Wreckers. This wear pad will fit on the following wrecker models: Holmes 600R, Vulcan 880/890, Modular 880/890, 896/897. See Brochures for reference charts.

This is a stop pad for the wheel lift on a Century Midnight Express by Miller Industries. It is located on multiple locations on the boom assembly on the Midnight Express.

This Boom Bottom Slide Pad from Miller Industries is 15" long and 3" wide. It is used on the Boom and Outrigger Assembly of Century and Challenger Wreckers from Miller Industries. Please see the features below for a list of Wreckers and see the brochure tab for breakdowns.

This is a 36" 10 series wear pad from Miller Industries.

This is the outer tube shim pad for the side, inside of the wheel lift by Miller Industries. This Shim Pad will fit the following wreckers: Century Modular Express 300 Series, Modular Midnight Express, Modular 400 & 600 Series, Holmes 440SL, Vulcan Modular 806, Modular 807, 812 Intruder, and Modular 880/890. See Brochures for reference chart and Features for related hardware. Each pad sold separately.

This is a Bearing Pad Kit by Miller Industries. It includes all the parts necessary to replace the wear pads on a 17'6" & 19' Aluminum Car Carrier. See Features for a list of parts that are included.

This is an inner tube slide pad for the top side of the wheel lift on the Century 12 & 16 Series LCG Generation II Car Carrier. Each pad sold separately.

This is a Bearing Pad Kit by Miller Industries. It includes all the parts necessary to replace the wear pads on a 19' 10 Series Steel Car Carrier 1996 and later. See Features for a list of parts that are included.

This is a 66" long subframe bearing pad by Miller Industries. It is one of the replacement pads for a 2010 or newer 10 Series Car Carrier. This part is included in the Bearing Pad Kit

Note: Special Handling Fees Apply

This is a 96" long subframe bearing pad by Miller Industries. It is one of the replacement pads for a 21' Steel LCG Car Carrier. This part is included in the Bearing Pad Kit 12-0940277.

• 5/16"x96" LCG Subframe Pad
• 2010 & Newer 10 Series Car Carriers

Jerr Dan rollback wear pad kit that is compatible with AEL, RST and WAR carriers manufactured November 1991 through the current year. Also fits AWL, AVP and SVP beds manufactured October 1994 through the current year. This kit comes with all of the necessary mounting hardware and 12 total pads that have different measurements. See the features below for a list of measurements.

Note: Special Handling Fees Apply

Miller Industries wear pad for the wrecker boom.

Wear pad kit for a 19' Century 10 series aluminum carrier. The Kit includes parts for 1 side only. This is a full length slide-in type pad that iserts into the groove in the aluminum sub-frame.

This is a Vertical Boom Guide pad for Century 300 Express Series, Century Modular 211, Vulcan Modular 804, Vulcan Modular 806, Vulcan Modular 807, Vulcan 805, Vulcan 810 Intruder, and Vulcan 812 Intruder by Miller Industries. See Brochures for part schematics and Features to see related parts and to see what models this will fit.

Note: Special Handling Fees Apply

This is a Bearing Pad Kit by Miller Industries. It includes all the parts necessary to replace the wear pads on a 10 and 12 Series Steel LCG Car Carrier. See Features for a list of parts that are included.

• (2) 12-0308927-16 5/16"x16" LCG Subframe Bearing Pads
• (2) 12-0308927-66 5/16"x66" LCG Subframe Bearing Pads
• (2) 12-0308927-96 5/16"x96" LCG Subframe Bearing Pads
• (38) 12-0403114 1/4-20x1"x82 Deg Torx Scres
• (2) 12-0306009 5/16"x1 1/4"x60" Bearing Pads

Wear Pad Kit, Century Formula I, Holmes DFT-400, and Challenger I-400 wheel lifts. Kit includes stinger wear pads, and extend cylinder pins & hardware.

This is a 60" long bearing pad by Miller Industries. It is one of the replacement pads for the bed of many different car carriers. See Features for dimensions and models it is equipped on. This part is included in the following Bearing Pad Kits:

Miller Industries heavy duty slide pad for the Century 1075S / SDU/4 underlift.

This is a wear pad cage plate on the inside, bottom of the outer boom of a Century Formula I 411/412, and a Century 6500 600 Series Wrecker. This cage plate also fits Challenger 4700 and 4800 Series Wreckers. It will also fit Holmes 440 Series and HP552 Series by Miller industries. See Brochures for a reference chart and Features for related parts. This part can be used to replace Part Number 12-0703093.

This is a Bearing Pad Kit by Miller Industries. It includes all the parts necessary to replace the wear pads on a 21'6" & 22'2" Stee l Car Carrier. See Features for a list of parts that are included.

This is a wear pad retainer plate on the up/down portion of the wheel lift by Miller Industries. It is bolted on by 3 bolts. This retainer plate fits the following wreckers: Vulcan 880/890, Modular 880/890, and 896/897. See Features for related hardware and Brochures for reference charts.

Jerr Dan rollback wear pad kit for 19' Jerr Dan carriers. Fits BIC (Best In Class) carriers and should be compatible with the following bed model numbers: NGAF, NGAD, NGAR, WSRB, RRSB, SLPB, NGAT, STRB, WAVB, RAYB, PAVB, ATRB, AWLB

Wear Pad Kit, Century Formula 6500 and Holmes DFT-650 wheel lifts. Kit includes stinger wear pads, and extend cylinder pins & hardware.

This is a 66" long subframe bearing pad by Miller Industries. It is one of the replacement pads for a 21' Steel LCG Car Carrier. This part is included in the Bearing Pad Kit

This Heavy Duty Flat Socket Bolt measures 1/4" x 1" with a thread size of 20.

This is an inner tube slide pad for the bottom side of the wheel lift on Century, Vulcan, & Champion car carriers excluding the LCG Series. See Features for which years/models they are used on.

This is the spacer bar by Miller Industries that is located on the up/down portion of the outer stinger weldment on a Vulcan Light Duty Wreckers. This spacer bar will fit on the following models: Vulcan Modular 880/890, 880/890, 896/897. There are two of these spacer bars for each wheel lift. See features for related hardware and see brochures for reference charts. Sold as Each.

Jerr Dan rollback wear pad kit for 20' and 21' Jerr Dan carriers. Fits BIC (Best In Class) carriers and should be compatible with the following bed model numbers: NGAF, NGAD, NGAR, WSRB, RRSB, SLPB, NGAT, STRB, WAVB, RAYB, PAVB, ATRB, AWLB

This is a zinc plated 1/4"-10 Nylon Lock Nut used in the assembly of our Bearing Pad Kits.