0 Item(s)
You have no items in your shopping cart.
Customers who bought this item also bought
FVP Brake Cleaner 13 oz. Can
The pros know that you don't mess around when it comes to brakes. FVP Brake Cleaner meets or exceeds OE quality with a price so competitive it will stop you in your tracks. FVP Non-Chlorinated Brake Part Cleaner removes oil, grease, brake fluid and containments quickly, with no residue.
$4.49
Temflex Vinyl Insulating Electrical Tape
Temflex vinyl insulating electrical tape. It is flame retardant, lead free,
cold and sunlight resistant, suitable for use at not more than 600V and not
more than 80?C (176?F).
$2.99
Miller Wear Pad Top V60 and V70
Top wear pads for the underlift of a Vulcan V60 or V70 wrecker.
$26.49
Tork Advanced ShopMax Centerfeed Shop Towels
Tork Advanced ShopMax Wiper 450 Center-feed shop towels are highly absorbent, offering excellent wipe-dry capabilities. Their strong construction offers durability and the self-dispensing pop-up box offers controlled dispensing. They contain 85% paper content (60% recycled, 40% postindustrial) and 15% synthetic emulsion. Sold in a box of 200.
$21.99
Thrust Washer - V-60
This is a replacement Thrust Washer to be used together with a pivot pin.
$108.99
Miller Stop Pad for Folding Boom, Vulcan V-50
This is a replacement stop pad for the folding boom on the Vulcan V-50 wrecker
by Miller Industries.
$69.99
Vulcan Pivot Pin 5" Crossbar V60 Wheel Lift
This Pivot Pin from Miller Industries fits a V60 heavy duty Wheel Lift. The
pivot pin is 3.5" in diameter and 6.31" long.
$381.99
Fastenal 1/4" - 28 Grease Fitting w/ Ball Check
This straight grease fitting is used to dispense grease into a mating part using a grease gun. It is made from steel with a zinc finish and comes with a ball check. This part has replaced part number
$0.29
Century Cable Tie Back HD Wreckers
This spring secures winch cable hook on large wreckers. This spring is used on
Vulcans and late model Century units as a cable tie-back. This spring links to
the hook with a pear link #9048800. Uses a 12-0804054 cable tie-back mounting
tube. Compatible with 2004 Units and Newer.
$26.49
Miller Extend Front Cylinder Pin Heavy Duty Vulcan
This is a replacement front mounting pin weldment for the extend cylinder on
heavy duty Vulcan wreckers. This pin fits the V-60, V-70, V-90, and V-100 heavy
duty wreckers by Miller Industries. This pin attaches the wheel lift stinger
extend cylinder to the wheel lift folding boom weldment. To view part
schematics please click on the Brochure tab.
$274.99
Thrust Washer - V-40
This part can be used to replace Part Number 915150001. For use with the pivot pin on Challenger Wheel Lifts.
$241.99
Miller Bolt, Grade 8, 5/8" x 1-1/4"
This is a grade 8 bolt by Miller Industries. It measures 5/8" Diameter by
1-1/4" Long.
$7.49
Related products
Century Bearing Pad In / Out Boom LCG
This is an inner & outer tube bearing pad for the wheel lift of a Century or
Vulcan LCG Series car carrier. There are a total of 4 bearing pads for each
equipped wheel lift. See Features for which years/models they are used on.
$18.59
Miller Wheel Lift Spacer Bar Century / Holmes / Vulcan
These are the spacer bars of the wheel lift on many light duty wreckers and a
few medium duty wreckers by Miller Industries. They are located on the top,
inside of the outer stinger and the top, outside of the inner stinger. These
spacer bars will fit the following wreckers: Century Modular Express 300
Series, Modular Midnight Express, Modular 211, Modular 400 & 600 Series, Holmes
440SL, 600R, Vulcan Modular 804, Modular 806, Modular 807, 812 Intruder,
Modular 880/890, and V-30. See Brochures for reference charts. Each pad is sold
separately.
$23.09
Chevron Wear Pad 1/2" x 2" x 3" Nylatron
This is an inner tube slide pad for the top side of the auto-grip wheel lift
option on the Century 12 & 16 Series LCG Generation II Car Carrier. Each pad
sold separately.
$16.89
Miller Wear Pad Wheel Lift Inner Stinger Century 300 Series and Vulcan 800 Series
This is a wheel lift wear pad for the outside, top of the inner stinger on
Vulcan Modular 807, Modular 880/890, 806, 880/890, 896/897 Wreckers and also on
the Century Express Modular 300 Series Wreckers by Miller Industries. See
Features for related parts and Brochures for reference charts.
$15.39
Century Bearing Pad 6 3/8" x 4" x 3/8"
This Bearing Pad from Miller Industries is used on the outer boom of wheel lift
and slide-in tire restraint assemblies of Miller Car Carriers. These include
Century, Challenger, Champion, Holmes, and Vulcan Carriers. The Bearing Pad
measures 6-3/8" long, 4" tall, and 3/8" thick. Please see the brochure tab for
a list of breakdowns.
$43.99
Zips Wheel Lift Wear Pad Kit Vulcan 880 / 890
Wear Pad Kit, Vulcan 880 & 890 wheel lifts. Upper and Lower wear pads. Kit
includes (1)
$79.99
Mobile Lifts Wheel Lift Wear Pad Jerr-Dan HPL35 and HPL60
This is a Jerr-Dan Wheel Lift Wear Pad for the Inner Wheel Lift Boom. The
dimensions of this wear pad are, 5.94" L x 3" W x .38" H.This wear pad is used
on the Jerr-Dan HPL-30 and HPL-60 Wreckers.
$12.99
Century Slider Pad 3" x 2 3/8" x 3/16"
This Slider Pad from Miller Industries is an inner tube slide pad for the
bottom side of the wheel lift on Century, Challenger, Champion, Holmes, and
Vulcan car carriers and wreckers. The pad measures 3" long, 2-3/8" tall, and
3/16" wide. Please see the brochure tab for a full list of breakdowns.
$10.89
Century Wear Pad 3" x 3" Challenger Champion and Vulcan
This is an inner tube slide pad for the top side of the wheel lift on all
Century, Vulcan, Champion, & Challenger car carriers excluding the LCG Series.
It is also compatible on Vulcan 810 Intruders and Century 411/412 & Midnight
Express. See Features for quantities for each model needed. Each pad sold
separately.
$23.99
Jerr-Dan Replacement Bed Lock Wear Pad
Replace the worn-out bed locks on your Jerr-Dan Standard Duty Car Carrier with
one of these new blocks.
$9.19
Century Wheel Lift Inner Tube Wear Pad 6" x 1.5" Holmes and Vulcan
This is a nylatron wear pad by Miller Industries. It measures 6" x 1-1/2" x
3/8". It will fit the following wreckers: Century Modular Express 300 Series,
Modular Midnight Express, Modular 211, Modular 400 & 600 Series, Holmes 440SL,
600R, Vulcan Modular 804, Modular 806, Modular 807, 812 Intruder, Modular
880/890, and 896/897. See Features for related parts and Brochures for
reference charts.
$10.59
Century Slide Pad 7" x 3" x 3/8"
This Slide Pad from Miller Industries is used in the wheel lift, underlift, and
tower assemblies of several Century, Challenger, and Holmes wreckers. This
slide pad measures 7" long, 3" tall, and 3/8" wide.
$17.79
Miller Wheel Lift Outer Tube Slide Pad 810 / Midnight Express
This is the outer tube slide pad for the bottom, inside of the wheel lift on
the Vulcan 810 Intruders & Century Midnight Express. See Brochures for
reference chart. Each pad sold separately.
$14.19
Miller Bearing Pad Kit Steel 21' Prior '10
Note: Special Handling Fees Apply
This is a Bearing Pad Kit by Miller Industries. It includes all the parts necessary to replace the wear pads on a 21' Steel Car Carrier prior to 2010. See Features for a list of parts that are included.
This is a Bearing Pad Kit by Miller Industries. It includes all the parts necessary to replace the wear pads on a 21' Steel Car Carrier prior to 2010. See Features for a list of parts that are included.
- (6) 12-0306007 1/4"x1 1/4"x54" Bearing Pads
- (2) 12-0306009 5/16"x1 1/4"x60" Bearing Pads
- (2) 12-0306032 1/4"x1 1/4"x11 1/4" Bearing Pads
- (2) 12-0306108 1/4"x1 1/4"x49 3/4" Bearing Pads
- (44) 12-0400367 1/4-20 Nylon Lock Nuts
- (44) 12-0403009 1/4-20x1" Hold Down Screws
- (10) 12-0403010 1-4-20x5/8" Self-Tapping Screws
$561.99
Miller Wheel Lift Wear Pad Cage Plate 804 / 6 / 7 211 / 300S and 440SL
This is the cage plate of the wheel lift on the Vulcan 804/806/807, Century
211/300 Series, and Holmes 440SL by Miller Industries. They are located on the
top, inside of the outer stinger. See Brochures for reference chart.
$41.99
Miller Wear Pad Wheel Lift Outer Stinger Vulcan 800 Series
This is a wheel lift wear pad for the inside, bottom of the outer stinger on
Vulcan 800 Series Wreckers by Miller Industries. This wear pad will fit on the
following models: Vulcan Modular 880/890, 880/890, 806, 896/897. See Features
for related parts and Brochures for reference charts. This part can be used to
replace Part Number, 9100112.
$21.19
Century Bearing Pad In / Out Boom LCG
This is an inner & outer tube bearing pad for the wheel lift of a Century or
Vulcan LCG Series car carrier. There are a total of 4 bearing pads for each
equipped wheel lift. See Features for which years/models they are used on.
$18.59
Miller Wheel Lift Spacer Bar Century / Holmes / Vulcan
These are the spacer bars of the wheel lift on many light duty wreckers and a
few medium duty wreckers by Miller Industries. They are located on the top,
inside of the outer stinger and the top, outside of the inner stinger. These
spacer bars will fit the following wreckers: Century Modular Express 300
Series, Modular Midnight Express, Modular 211, Modular 400 & 600 Series, Holmes
440SL, 600R, Vulcan Modular 804, Modular 806, Modular 807, 812 Intruder,
Modular 880/890, and V-30. See Brochures for reference charts. Each pad is sold
separately.
$23.09
Chevron Wear Pad 1/2" x 2" x 3" Nylatron
This is an inner tube slide pad for the top side of the auto-grip wheel lift
option on the Century 12 & 16 Series LCG Generation II Car Carrier. Each pad
sold separately.
$16.89
Miller Wear Pad Wheel Lift Inner Stinger Century 300 Series and Vulcan 800 Series
This is a wheel lift wear pad for the outside, top of the inner stinger on
Vulcan Modular 807, Modular 880/890, 806, 880/890, 896/897 Wreckers and also on
the Century Express Modular 300 Series Wreckers by Miller Industries. See
Features for related parts and Brochures for reference charts.
$15.39
Century Bearing Pad 6 3/8" x 4" x 3/8"
This Bearing Pad from Miller Industries is used on the outer boom of wheel lift
and slide-in tire restraint assemblies of Miller Car Carriers. These include
Century, Challenger, Champion, Holmes, and Vulcan Carriers. The Bearing Pad
measures 6-3/8" long, 4" tall, and 3/8" thick. Please see the brochure tab for
a list of breakdowns.
$43.99
Zips Wheel Lift Wear Pad Kit Vulcan 880 / 890
Wear Pad Kit, Vulcan 880 & 890 wheel lifts. Upper and Lower wear pads. Kit
includes (1)
$79.99
Mobile Lifts Wheel Lift Wear Pad Jerr-Dan HPL35 and HPL60
This is a Jerr-Dan Wheel Lift Wear Pad for the Inner Wheel Lift Boom. The
dimensions of this wear pad are, 5.94" L x 3" W x .38" H.This wear pad is used
on the Jerr-Dan HPL-30 and HPL-60 Wreckers.
$12.99
Century Slider Pad 3" x 2 3/8" x 3/16"
This Slider Pad from Miller Industries is an inner tube slide pad for the
bottom side of the wheel lift on Century, Challenger, Champion, Holmes, and
Vulcan car carriers and wreckers. The pad measures 3" long, 2-3/8" tall, and
3/16" wide. Please see the brochure tab for a full list of breakdowns.
$10.89
Century Wear Pad 3" x 3" Challenger Champion and Vulcan
This is an inner tube slide pad for the top side of the wheel lift on all
Century, Vulcan, Champion, & Challenger car carriers excluding the LCG Series.
It is also compatible on Vulcan 810 Intruders and Century 411/412 & Midnight
Express. See Features for quantities for each model needed. Each pad sold
separately.
$23.99
Jerr-Dan Replacement Bed Lock Wear Pad
Replace the worn-out bed locks on your Jerr-Dan Standard Duty Car Carrier with
one of these new blocks.
$9.19
Century Wheel Lift Inner Tube Wear Pad 6" x 1.5" Holmes and Vulcan
This is a nylatron wear pad by Miller Industries. It measures 6" x 1-1/2" x
3/8". It will fit the following wreckers: Century Modular Express 300 Series,
Modular Midnight Express, Modular 211, Modular 400 & 600 Series, Holmes 440SL,
600R, Vulcan Modular 804, Modular 806, Modular 807, 812 Intruder, Modular
880/890, and 896/897. See Features for related parts and Brochures for
reference charts.
$10.59
Century Slide Pad 7" x 3" x 3/8"
This Slide Pad from Miller Industries is used in the wheel lift, underlift, and
tower assemblies of several Century, Challenger, and Holmes wreckers. This
slide pad measures 7" long, 3" tall, and 3/8" wide.
$17.79
Miller Wheel Lift Outer Tube Slide Pad 810 / Midnight Express
This is the outer tube slide pad for the bottom, inside of the wheel lift on
the Vulcan 810 Intruders & Century Midnight Express. See Brochures for
reference chart. Each pad sold separately.
$14.19
Miller Bearing Pad Kit Steel 21' Prior '10
Note: Special Handling Fees Apply
This is a Bearing Pad Kit by Miller Industries. It includes all the parts necessary to replace the wear pads on a 21' Steel Car Carrier prior to 2010. See Features for a list of parts that are included.
This is a Bearing Pad Kit by Miller Industries. It includes all the parts necessary to replace the wear pads on a 21' Steel Car Carrier prior to 2010. See Features for a list of parts that are included.
- (6) 12-0306007 1/4"x1 1/4"x54" Bearing Pads
- (2) 12-0306009 5/16"x1 1/4"x60" Bearing Pads
- (2) 12-0306032 1/4"x1 1/4"x11 1/4" Bearing Pads
- (2) 12-0306108 1/4"x1 1/4"x49 3/4" Bearing Pads
- (44) 12-0400367 1/4-20 Nylon Lock Nuts
- (44) 12-0403009 1/4-20x1" Hold Down Screws
- (10) 12-0403010 1-4-20x5/8" Self-Tapping Screws
$561.99
Miller Wheel Lift Wear Pad Cage Plate 804 / 6 / 7 211 / 300S and 440SL
This is the cage plate of the wheel lift on the Vulcan 804/806/807, Century
211/300 Series, and Holmes 440SL by Miller Industries. They are located on the
top, inside of the outer stinger. See Brochures for reference chart.
$41.99
Miller Wear Pad Wheel Lift Outer Stinger Vulcan 800 Series
This is a wheel lift wear pad for the inside, bottom of the outer stinger on
Vulcan 800 Series Wreckers by Miller Industries. This wear pad will fit on the
following models: Vulcan Modular 880/890, 880/890, 806, 896/897. See Features
for related parts and Brochures for reference charts. This part can be used to
replace Part Number, 9100112.
$21.19
