Custom Trim & Accessories

Trim-Lok's edge trim is flexible Poly Vinyl Chloride (PVC) trim with individual internal metal clips and gripping tongue to provide a stronger grip. As you likely already know, having the right rubber trim for metal edges can make an impact on any project. Whether you run an auto repair shop and need sewable upholstery trim for cars and trucks or manufacture furniture for a living and require decorative trim for your line of products, Trim-Lok manufactures flexible edge trim that can be used in many different industries. As an added bonus, each flexible edging strip purchased from Trim-Lok is manufactured with individual internal metal clips and a gripping tongue. These clips and tongue provide a stronger grip, meaning Trim-Lok's line of edge trim products will last longer than many alternatives available on the market. If you're looking for a flexible metal trim with strong gripping power, excellent resistance to sunlight, water, and the ozone, and a strong, outer coating material, look no further- build your own edge trim today and see the difference for yourself.

This fire retardant trim from Lavanture Products Co. is a flexible trim with metal clips to provide a permanent grip. It is manufactured out of a thermoplastic Vulcanizate (TPV) material formulated to pas the National Fire Protection Agency (NFPA) standards. This material also complies with the UL 94HB flame requirements most commonly needed in electrical enclosure applications.

Note: Special Handling Fees Apply for Specific Items

Note: Due to size of product, additional handling charges may apply.

Phoenix Stainless Steel Stanchion Kit. This kit includes two stainless steel tubing with four chrome plated end stanchions. Pick from the kit with or without the mounting screws. These hand rails are perfect when you need to grab a handle for balance.

• Low profile handrail kits
• Hand and grab rails are made of 7/8" or 1-1/4" stainless steel tubing
• The low profile posts or stanchions have a perma-plate chrome finish
• Packed in pairs that you can mix or match to create your own combinations
• Choose With or Without Mounting Screws
• Dont see the size you need? These can be cut down to size

Kit Includes:

• (2) Stainless Steel Tubing
• (4) Chrome Plated End Stanchions
• Center Stanchions Included in the 48"-96" Kits

Phoenix End Stanchion for 7/8" or 1 1/4" diameter handrail.

Phoenix Body Accessory Stainless Steel Tube.

This is a polished stainless steel dress-up kit for the SP9000 sidepuller by In the Ditch. This dress-up kit will set your truck off and give it the custom look you want. These accent panels are laser cut from polished stainless steel and have 3-M double sided tape already installed. Each kit includes two boom accent panels, two leg accent panels with pinch point decals installed on them.

Note: Special Handling Fees Apply for Specific Items

These Stainless Steel Door Guard Kits are from Miller. They are designed for a Century Box.

Note: Special Handling Fees Apply for Specific Items

This Stainless Steel Door Trim Kit from Miller Industries is used with a Century 3212, CXVX, or V30. Comes with two pieces of trim and a roll of adhesive to attach with.

Available in the following sizes

Item #	Size
124004574	V30-Tall-120"
124004575	V30-Tall-138"
124002613	CXVX/3212/V30 - 3 Door - 120"
124004761	CXVX/3212/V30 - 3 Door - 138"

Stainless Steel Door Guard Kit for Tunnel on Century Large Wrecker.

Trim-Lok's trim-seal is a flexible PVC trim with a sponge rubber bulb attached to provide a secure seal for a variety of applications. It protects against moisture and weather damage. With strong gripping tongues and resilient design, Trim-Lok's trim seals and bulb gaskets are sure to stay in place, even in extreme temperatures and erratic weather conditions. Regardless of the application, our extruded rubber bulb seals will seal and protect against weather damage so your products won't be affected by rain, snow, wind, or extreme heat.

Phoenix Center Stanchion for 7/8" or 1 1/4" diameter handrails.

Trimloc rubber edge trim seal 1/8" x 5/8" x 9/16". Use around truck cabs, RV doors, lids, golf carts, garage doors, tractors, ATV fenders, fiberglass, sheet metal and more. It prevents leaks, gaps and vibration. The flexible PVC trim with a metal clip inside provides a permanent grip.

Front Body Trim for Road Service Body, Aluminum Deck Plate.

Trim-Lok's bulb trim seals are manufactured from a flexible PVC trim with an attached EPDM sponge rubber tubing, ensuring a safe, secure seal for a variety of applications. With strong gripping tongues and resilient design, Trim-Lok's trim seals and bulb gaskets are sure to stay in place, even in extreme temperatures and erratic weather conditions. Regardless of the application, our extruded rubber bulb seals will seal and protect against weather damage so your products won't be affected by rain, snow, wind, or extreme heat. They are the product of choice for the automotive, marine, and transportation industries. It is used on the body assembly of Century and Vulcan wreckers.

Note: Special Handling Fees Apply

1-1/4" Hand Rail Kit from Miller Industries. This Kit includes 2 20' rail pieces, stanchions, and fasteners needed.

• 1-1/4" Hand Rail Kit
• Includes all rails, stanchions, and fasteners needed

This is a replacement Large Stanchion Gasket by Phoenix USA. This part can be used to replace Part Number 4000G.

This Aluminum Door Trim Seal is for the new style Miller Heavy Bodies.

This is a tailboard dress-up kit from Miller Industries. For this dress-up kit, you can choose from diamond plated or smooth finish accents. This aluminum dress-up kit includes the left tailgate panel, right tailgate panel, and tower panel. This dress-up kit will fit on a Century 5130 and 5230.

This Stainless Steel Cylinder Wrap Kit from Miller Industries is to be used on Century 9055 and 1140 trucks. The kit will include enough products to do up to 2 cylinder wraps.

These stainless steel screws are used with 7/8" stanchions. They measure 10/32" x 3/4", which is the correct size for low-profile handrail stanchions. These screws will maintain a clear, rust free appearance.

This stainless steel Trim Cover, from Miller Industries, is for each end of the H-Beam Outriggers. This will work with the present outriggers witht he horseshoe on the outside.

Tim-Lok's flap seal is a flexible PVC trim with an EPDM sponge rubber flap attachd to provide a secure seal in a variety of dynamic applications.

Aluminum Dress Up Kit (Tailgate Only) for the Body of a 7035, 9055. Includes Left Tailgate Panel, Right Tailgate Panel, and Tower Panel.

This Tailboard Dress Up Kit from Miller Industries can be used on Vulcan V-70 and V-100 trucks.

This Kenworth Dummy Stack is from Miller Industries. Mounts on Top of D.P.F.