In The Ditch

In The Ditch now has Galvanized Steel Trash Cans. Made from galvanized steel, these trash cans are guaranteed to last for years. You can choose from a 6 gallon trash can or a 4 gallon trash can. Each of these sizes comes with a lid included. The 4 gallon trash can and lid can be used to replace miller part number 124002700. These trash cans are approximately 22" tall and have a width of about 10".

This is a replacement custom snap button for the Speed Dolly aluminum telescoping axles by In The Ditch. This button is made from stainless steel to help prevent against corrosion.

In The Ditch Trash Can Mounts are made from aluminum and can be easily mounted to any carrier or vertical surface. These mounts are made from 1/8" aluminum and they come with pre-drilled mounting holes that will fit on their Pro Series Tool Boxes for easy installation. You can choose from a mount that will hold either a 4 gallon trash can or a 6 gallon trash can. The trash can and bungee cords are not included with these mounts. Shop for a

Note: Special Handling Fees Apply

This lightweight Breakover Bar from In The Ditch was designed to work with a Speed Dolly and XD Dolly. It has a soft grip handle, and it is the lightest dolly bar on the market.

• Lightweight hollow tubing
• CNC-machined solid steel end
• Soft grip handle
• Length produces leverage

These dolly sets from In The Ditch offfer the best capacity with either a powder-coated or zinc plated frame and aluminum axle. As with any X-Series model, the manufacturer has added a fifth adjustment hole to widen the dolly combination to 85 inches, and the wheels feature a patented cam-lock design to move from storage position to on-the-road use. The unit is also low maintenance as the sealed hub never needs to be greased and the bolt-on spindles are easy to replace. These dollies are available with either 4.80 or 5.70 tire size.

In The Ditch's Locking Simple Mount is a great low cost way to hold your Speed Dollies and keep them safe. This mount is the same as the Simple Mounts but now they feature the new speed lock on them. This mount is made from steel and comes in a tuff coat black finish. Choose from the Standard or the XD Mounts. The Standard is made for 4.8 Tires and the XD is made for 5.70 tires. Sold as Each.

In The Ditch's Trash Can Mounts are made from aluminum and can be easily mounted to the deck of a wrecker or any flat surface. You can choose from either a 4 gallon trash can mount or a 6 gallon trash can mount. Both are made from 1/8" thick aluminum and are easy to install with pre-drilled mounting holes. These mounts do not include a trash can or the bungee cords. Shop for your new

These In The Ditch tow dollies hold up well against road grime, while the lightweight aluminum axle and ergonomic handle make it simple to maneuver on the recovery site. Bolt-on spindles are easy to replace with basic hand tools, and the speed-lube design (SLX) makes packing bearings effortless with a center grease zerk on this assembly. These dollies feature best in class capacity, and are available in powder coat black or zinc plated finish. They are also available with a tire size of 4.80 or 5.70.

In the Ditch Pro Series Underbody Toolbox. The door on these boxes have a 400 lb rating so you can use it as a step. This series of boxes come with a single latch but has two internal rotary door strikers to keep the door securely closed and sealed from the weather. The In The Ditch Boxes come with pre-drilled holes just pop the plastic plug out of the pre-drilled hole to be able to us all the In The Ditch accessories.

Prolong the life of and prevent maintenance issues on your In The Ditch Speed Dolly with this replacement 4 on 4" cast hub and bearing assembly. 1250-lb. capacity when assembled. This hub is for the SLX (Greaseable) style dollies. These are NOT interchangeable with the XL (Sealed Hub) dollies

This is a replacement cam lock rebuild kit for the Speed Dolly. This kit includes a roll pin, plunger, and spring.

Please Note: Product Discontinued - ALL SALES FINAL!

Discontinued items are not eligible for return. View Returns Policy

These Box Top Trays from In The Ditch really increase storage for your truck and put things right where you need them. When you lower the deck, everything is out of the way of prying eyes. The Box Tops open bottom design uses the tool box for the base and also allows for drainage. These are a must have for any professional operator's truck. With seven different sizes we will have a Box Top to fit your needs. Many operators mix and match Box Tops to get the length that best fits their needs. All of these Box Tops are made from aluminum and come pre-drilled for easy installation.

• In The Ditch Box Top Tray
• Choose from seven different lengths:36", 48", 60", 65", and 70"
• All Box Tops are 16" wide
• Open bottom design uses to the toolbox as the base
• Open bottom allows for drainage
• Made from aluminum
• Pre-drilled for easy installation
• Sold as each

Available in the following sizes



Item #	Shelf Kits	Dimensions
ITD-1066	No Dividers	36"L x 16"D
ITD-1121	No Dividers	48"D x 16"W
ITD-1098	No Dividers	60"D x 16"W
ITD-1122	No Dividers	65"D x 16"W
ITD-1067	No Dividers	70"D x 16"W
ITD-1066-D	With Divider	36"D x 16"W
ITD-1121-D	With Divider	48"D x 16"W
ITD-1098-D	With Divider	60"D x 16"W
ITD-1098-D	With Divider	65"D x 16"W
ITD-1098-D	With Divider	70"D x 16"W

This "W" Mount from In The Ditch is great for those wanting an easy solution for quickly mounting and storing their break over bar and axles. This mount is ideal for mounting in the back of a pickup, on top of a tool box or on a wrecker deck. Mount can be locked by using a Pad-Lock, which is not included. The break over bar is secured in place with a thumbscrew. This mount is made from steel and comes with a black finish. Get your

This machined-aluminum wheel is an exclusive design from In The Ditch. The rim is a replacement part for the ITD Speed Dolly and has met all of the DOT requirements.Rim comes with a high pressure valve stem installed.

Note: Special Handling Fees Apply for Specific Items

Cut tool box installation time by more than half with this In The Ditch's Quick Mount. This Quick Mount has been the perfect choice for those who have one of the new low profile car carrier beds. In The Ditch made the mounting arms longer so you can drop the box down further to clear low profile beds. The Quick Mount has a unique low profile which will allow them to work with either inboard or outboard tilt cylinders. This Quick Mount is made from steel and come in a tuff coat black finish.

Recommend 2 mounts for 24" to 60" tool boxes and 3 mounts for 70" on up tool boxes

• The Ditch Tool Box Quick Mounts Only (Brackets sold separately)
• Works well with new Low Profile Car Carrier Beds
• Made from steel with a tuff coat black finish
• Sold as each (Not a pair)


Dimensions For Mounts:
• ITD-1581- Height: 14 9/16" Width: 7 1/8" Length: 27 3/4"
• ITD-1584- Height: 16 1/2" Width: 5 1/4" Length: 32 1/2"
• ITD-1588 and ITD-1588-GLV- Height: 18 1/2" Width: 5 1/4" Length: 32 1/2"
• ITD-1580 and ITD-1850-GLV- Height: 20 1/2" Width: 5 1/2" Length: 32 1/2"
Please see photos above for extra dimensions

Following Parts Sold Separately:

In In The Ditch Quick Mount Bracket - #ITD-6268
In The Ditch Mount Spacer (Only) - #ITD-6340

The In The Ditch Cycle Caddy is the easiest way to load a motorcycle onto the deck of a carrier. The innovative Speed Ramp on the Cycle Caddy makes loading a motorcycle smooth and nearly effortless. No more having your cycle loader jump out of the way as you try to load a motorcycle. Our Cycle Caddy stores in a folded, compact position saving you valuable room in your tool box. The Cycle Caddy not only stores easily it also assembles easily and has easy to follow instructions printed right on it. This Caddy is made from steel, comes in a tuff coat black finish, and is strong enough to support a motorcycle up to 950 lbs.

This machined-aluminum wheel is an exclusive design from In The Ditch. The rim is a replacement part for the ITD Speed Dolly and has met all of the DOT requirements.Rim comes with a high pressure valve stem installed.

This is a replacement Dolly Pin Kit for the X-Series Dollies by In The Ditch. Requires 2 pins per side frame.

This is a replacement sealed hub bearing kit for the X-Series dollies by In The Ditch.

This is a locking pin for the simple mounts for In The Ditch.

This cord holder is a great way to not only securely store your power cords and air hoses but also keep them organized and easy to access. These are also perfect for a variety of hammer types and sizes to keep them at the ready above your workbench. Aluminum alloy construction and our Endurance Black Powder Coat Finish keeps your Air Hose Mount looking sharp even after years of faithful service. Mounting to any surface in your garage or trailer is simple, just select proper mounting hardware for pegboard, wood, metal or even drywall. We designed these for use in our manufacturing facility and put a lot of thought into getting everything just right. Like most of the products we make, we designed them because no one seemed to build what we wanted that actually worked.

Update worn and tired straps on your In The Ditch Speed Tow dolly with this replacement strap. The black strap includes a ratchet and coated S-hooks for proper securement of a tire to the tow dolly.

This is a steel flange bushing.

Replacement tire for In The Ditch's Speed Tow Dolly. Make sure to use steel valve stem and inflate tire to suggested PSI on sidewall to achieve maximum load rating capacity.

In The Ditch designed their XD "Extreme Duty" Trash Can Mounts to hold up to 60 lbs. of weight. Not only will these mounts hold up to 60 lbs. of weight, but they look good and will last for years. You can choose from either a 6 gallon can XD mount or 4 gallon can XD mount. These mounts are made from 1/8" thick aluminum and they have a bungee cord already installed. Both of these mounts can easily be mounted to any vertical surface such as tool boxes, truck frames, or garage walls. There is no trash can included with these mounts but we do offer those too. Shop for your new

The Revolution Boom Head from In The Ditch is a direct replacement for the Holmes 440, SP8000, SP12000 Side Puller and the Century Midnight Express. This wire rope guide cover comes off with one hand, allowing for easy wire rope installation.

These completely redesigned Lumber Baskets from In The Ditch are available in three different lengths: 48", 60, and 70". All of these baskets are 11" tall and 8" deep. Mounting is a snap; just bolt the basket to the back of your tool box with six 5/16" bolts using the pre-drilled holes. In minutes you will have a great place to store extra lumber, tire chains or anything else that you can think of. These Lumber Baskets are made from aluminum and they have drain holes in the bottom that will help them last for decades.

This Deck Mounted Cone Holder from In The Ditch is an innovative cone mount that installs in minutes. Just interlock the sides and bolt to any flat surface using pre-drilled holes. This cone holder will hold up to six cones. Choose from the 18" Cone Holder or the 28" Cone Holder. We offer safety cones and variety of cone holders,

This patented design from In The Ditch has a universal fit that allows you to use one hitch on different trucks. This hitch will be a real money maker for your truck. Stop sending two trucks to do the job of one. With this power hitch you can bring the customers pickup in on the deck and bring the trailer in on the wheel lift. The power hitch fits any wheel lift with 3" x 3" up to 4" x 4" crossbars, and works perfect on wreckers or carriers. The power hitch includes a 5th wheel hitch and goose neck ball. The power hitch pins on and off in minutes and has a 12,500 lb. rating.

This Universal Mount system is a perfect choice for those wanting a low profile all-in-one mount that holds a Speed Dolly frame, axle and break over bar. The Universal Mount uses the same bolt pattern that is pre-drilled in Jerr-Dan MPL, MPL40 and Element wrecker bodies but can be used on any brand wrecker body. The Kit comes complete with everything needed to hold 2 Dolly frames, 1 break over bar and 2 axles and comes in our Tuff Coat Black Finish. Pick from the Standard or the XD Mounts. The Standard Mount is made for 2 Speed Dollies with 4.80 Tires. The XD Mount is made for 2 XD Dollies with 5.70 Tires. Sold as set.

These Pro Series Dolly Bunks from In The Ditch fit all sizes and all brands of dollies with either 4.80 x 8 or 5.70 x 8 tires. Dolly bunks are made from 3/16" thick aluminum and will last for years. This set includes two complete bunks and two lockable retaining chains.

This Tension Spring is a direct replacement for the ITD-1196 Universal Spring Tube. This part can be used to replace Part Number 12-0308733.

This is a replacement bolt on spindle kit for the right hand side of the X-Series Standard Duty Dolly by In The Ditch.

This In The Ditch 5 Gallon Gas Can Mount is made from aluminum and holds a 5 gallon plastic fuel can. The mount is made from aluminum and it is easy to install. Gas can and bungees are not included, but we also offer those. Shop for

This Broom and Shovel Rack is the perfect way to store your brooms and shovels. Mount this rack to the deck, wall, or roof for easy access. The angle of the mount can be adjusted to the angle that is most convenient for you. Come pre-drilled for bungee cords to make securing your brooms and shovels easy. The rack also comes with a bolt-on bracket that keeps your broom head or shovel head flat.

This Grease Cap is for use with the Speed Lube Spindle Speed Dollies from In The Ditch.

This Rubber Plug for ITD-7123 Grease Cap is for use with the Speed Lube Spindle Speed Dollies from In The Ditch.

The Speed Spacer from In The Ditch solves that age old problem of how to dolly a vehicle with a flat tire. They have designed the Speed Spacer as a tool to take up space that a tire full of air would have occupied. made from high strength aluminum the Speed Spacer is not only strong, it is light and easy to install. It is sold as an individual item so you need to order (2) in order to make a set for one side of your dolly.

This Angled Cone Mount from In The Ditch is a perfect way to mount your traffic cones on a carrier or flatbed truck. The angle of the mount allows you to quickly access cones from under a fixed deck. The angled cone mount will hold up to six 18" traffic cones. This mount is part painted steel and part aluminum that will hold up to years of abuse.

This is a replacement bolt on spindle kit for the left hand side of the X-Series Standard Duty Dolly by In The Ditch.

This Revolution Boom Head from In The Ditch is a direct replacement for the Holmes 440, SP8000, SP12000 Side Puller, and the Century Midnight Express. The head accepts 3/8" and 7/16" wire rope, and it has a 12,000 lb. rating. The guide cover comes off easily with one hand, which allows the wire rope to be installed with ease.

Dust cap for 4 bolt hub on Speed Dolly.

This Double Axle Rack from In The Ditch is perfect for those wanting to store their dolly axles and break over bear on one side of the truck. A great feature of the double axle rack is that it can be mounted on an incline; which is a big advantage when you have a wrecker with a rear sloping deck. The double axle rack comes with different mounting brackets, whether you have a flat mounting surface or a slopped deck you will have the right mounting bracket for you truck. With the AUTO-LOX system your axles easily fit in the mount and lock into place. The mounts are pre-drilled, lockable and come in a tuff coat black finish. We also offer a

In The Ditch Towing Products provides a replacement sealed hub assembly.

This is a replacement bolt on spindle kit for the right hand side of the X-Series Standard Duty Dolly by In The Ditch.

1" Grease Seal, used for Speed Dolly, 4 bolt hub.

This Spindle Nut Retainer is for use with the Speed Lube Spindle Speed Dollies from In The Ditch.

This Slide In Jack Bracket from In The Ditch is made from aluminum and it is 13" wide and 25" long, so most floor jacks will slide in easily. This bracket is really going to save your back. Stop wrestling with your floor jack and install this bracket today. Installation is easy; just remove the back panel of the tool box and bolt the Slide In Jack Bracket in using the included hardware kit.

Maximize the recovery capabilities of your car carrier rollback, light duty wrecker, or medium duty tow truck with the In the Ditch SP9000 Sidepuller. This is a SP9000 Sidepuller that is designed for those who want a more customized installation. Zip's provides you with the sidepuller, from In the Ditch, with everything except the valve body and hydraulic hoses. This gives you the option of providing your own custom hydraulic controls. Typically this application is for those who order their carrier or wrecker with factory installed sidepuller controls. When you order this SP9000 sidepuller it will come with the following: Center Recovery Boom Head, Outer Removable Recovery Boom Head, Light Bar Mounting Base, 9,000 lb Winch with Tensioner Plate, Winch Free Spool with Easy Reach Handle, 3/8" x 100' Wire Rope, Adjustable SP Mounting Base, Installation Hardware, Painted Tuff Coat Gloss Black Finish, Polished Stainless Steel Rear Panel, Decal Package, Operation Manual (also available online), and it will come on a shipping stand. To view a specifications sheet and operations manual, click on the brochure tab. Click on the video tab to see more about this amazing product.

This Universal Storage Bracket from In The Ditch is perfect for holding two small 2.5 gallon jugs, a 5 gallon jug, a small tool box or just about anything that will fit in its 11-1/4" x 16-1/2" mounting surface. Multiple slots have also been included so straps or bungee cords can be used to secure your items to the mount. This mount will bolt directly to a tool box.

This Axle Slide Tunnel Box Mount from In The Ditch has become a best seller. This mount is easy to install and easy to use; just bolt the mount to the top of your tunnel box. Axles have a tab factory installed that fits the slot in the mount. All you do is start the axle into the mount, push across, and your axle automatically locks into place. This mount will hold two axles and one break over bar. Shop for your

In The Ditch Peg Board Mounted Aerosol Can Holders come in 3 different sizes: (1) Can (3) Can and (6) Can holders. Our spray can holders are a great way to not only store your aerosol cans, they work great to keep your aerosols organized and easy to access. Our peg board spray can storage racks are made from steel and are powder coated in a black finish. The hole spacing for mounting our aerosol storage racks are made so you can install them in peg board using our Quick Mount Peg Board Screw . Installing your spray can rack is simple, just line up the mounting holes with the peg board holes and install our peg board screws. It s that simple! No drilling, no measuring, no leveling and best of all you can reuse the peg board screw over and over with no damage to the peg board hole. If you want to install the aerosol holder on any flat surface, just the type of hardware for each mounting surface. You can mount with pegboard mounting screws, dry wall screws, metal screws or mount to wood with a wood screw, it s your choice. We designed these for use in our manufacturing facility and put a lot of thought into getting everything just right. Like most of the products we make, we designed them because no one seemed to build what we wanted that actually worked.

These Shelf Kits from In the Ditch are available in three different sizes: 48" 60" and 70". Full length shelves will essentially double the useable space inside of your toolbox. Made from aluminum, these shelves are 14" deep. The shelves actually come as two half shelves with a vertical support, giving you the option to use them as a half shelf or full shelf. All necessary mounting hardware is included and there is no drilled required because of they come pre drilled.

In The Ditch's Locking Short Simple Mount is a great low cost way to hold your Speed Dollies. This mount is the same as the Short Simple Mounts but now they feature the new speed lock on them. This mount is made from steel and comes in a tuff coat black finish. Sold as Each.

This machined aluminum wheel is an exclusive design from In The Ditch. The rim is a replacement part for the ITD Speed Dolly and has met all of the DOT requirements. Rim comes with a high-pressure valve stem installed.

This pylon is designed to fit all SP series sidepullers. It is made from steel and comes standard with stainless steel mounting hardware. It features laser cut holes for mounting work lights and is painted in a tuff coat gloss black finish. This pylon will need to have the In the Ditch light pylon mounting base installed on the sidepuller in order to mount this pylon.

18" Lanyard Cable is a replacement part for In The Ditch Pro Series Toolboxes. When installed on each end of a toolbox, the door in its open position is capable of holding 400 lbs.

These In The Ditch Toolbox Dividers are the perfect way to organize your underbody box. They are made in several different lengths and come with pre-drilled holes so installation is a snap! Take the time to divide your box so things stay where they belong and not in one frustrating pile. Toolbox Dividers come in five different lengths so we will have one for your box. Get organized today!

This is a replacement bolt on spindle kit for the left hand side of the X-Series Standard Duty Dolly by In The Ditch.

This all new GoJak Mount from In The Ditch is for those who want to mount a GoJak to a flat surface. This mount is made from aluminum and will hold the 5,000 and 6,000 series GoJaks. Shop for your