Toolboxes
Store your on-the-go tools in an underbody toolboxes, pass through tunnel toolboxes, hand tool toolboxes, pickup bed toolboxes, pickup bed toolboxes or deck mounted toolbox from Zips.com! Made by B/A Products, Phoenix USA, Buyers Product Co., Ramsey Winch, American Eagle, RC Industries, In the Ditch and Bawer, you will be getting the best product attached to your commercial truck, tow truck, semi truck or other work vehicle. Not only do we carry toolboxes but lumber baskets, chain box, accessory bags made from aluminum, washable, stainless steel, steel, mesh bottoms.
In The Ditch Lumber Baskets
In The Ditch Full or Half Shelf Kit
In The Ditch Heavy Duty Storage Drawers
In The Ditch Floor Jack Tray
In The Ditch Pro Series Slide Out Drawer
In The Ditch Stainless Steel Quarter Fender Panels Panels Only
These are replacement stainless steel panels for In The Ditch Quarter Fender and Storage Fenders. They are available in 4 sizes: 16.75", 24.25", 34.75", and 42.75". Choose your size and which side you want from the drop down menus.
- Choose from 4 different sizes: 16.75", 24.25", 34.75", and 42.75"
- Choose which side you want: drivers side or passenger side
- Panels Only - Does Not Include Fender
Available in the following sizes
Item # Side Size ITD-1334-L DRIVER 34.75 ITD-1335-L DRIVER 42.75 ITD-1367-L DRIVER 24.24 ITD-1334-R PASSENGER 34.75 ITD-1335-R PASSENGER 42.75 ITD-1367-R PASSENGER 24.24
In The Ditch Storage Fenders Kit (Use with 20.5in Quick Mount)
In The Ditch Toolbox Dividers
In The Ditch Individual Storage Fenders (Use with 20.5in Quick Mount)
In The Ditch Workman Series Toolbox
The Workman Series Underbody Toolbox from In the Ditch is a reliable way to store your gear. Set off by a mirror polish finish, the 14-ga. stainless steel door panel gives it a showroom appearance while also being very tough. Plus, the latches and hinges are both made of stainless steel ensuring durability at every point. To protect against corrosion, there is a drip edge and gasket to protect against moisture. Choose your preferred size from the drop-down menu.
In The Ditch Tool Box Mount (Quick Mount)
- #ITD-QUICK MOUNTS
Product Highlights
Cost-Effective Solution
Like a lunch box and hard hat, the Workman Series is ready to go to work everyday. Don’t be fooled by the name though. This toolbox is just as effective as similarly-sized toolboxes but at a lower, more budget-friendly price point.
Heavy-Duty Construction
The 0.90 aluminum walls and the 14-ga. stainless steel door means this toolbox will be around for a long time. Rest assured, you won’t have to worry about corrosion compromising the strength and integrity of the box, causing you to replace it before its time. The durable steel hinges will also hold up to repeated door swings.
Professional Appearance
Stand out from the competition with the mirror finish on the stainless steel doors. You've worked hard to build a professional image. Keep it going with highly polished curb appeal.
Weatherproof Design
You’ve invested in quality equipment and tools. Now protect them from the elements with this weathertight box. The integrated drip edge and automotive-style gasket prevents road spray, rain and snow from entering the cavity and causing premature wear and corrosion to your gear.
Secure Storage
Make sure your tools stay put with stainless steel latches and keyed locks. Unlike plastic locks, the 3/16" custom latches are tamper-resistant and provide more secure storage for your expensive tools.
Versatile Sizing
Take advantage of the bonus space under your flat bed or trailer deck. Choose from several different lengths to fit within your wheelbase. The 48", 60" and 70" boxes come with dual locking latches, while the 36" size features a single latch.
Easy Installation
Cut your installation time in half with In The Ditch’s Quick Mounts. Just bolt the steel brackets to the frame rail and hang the toolbox in the frame. No more jacking up the box to install. Four sizes are available to allow for the perfect mounting height.
Flexible & Functional
Your tools of the trade will likely vary from the next guy. That’s why these Workman toolboxes are customizable with shelving, dividers and optional add-ons, like fender storage and box-top organizers.
Please note Workman Series toolboxes do not come with pre-drilled holes, giving you the flexibility to mount them where you want them.
Specifications
Available Sizes
| Item # | Length | Height | Depth | Latch Type |
|---|---|---|---|---|
| ITD25135 | 36" | 18" | 18" | Single Locking |
| ITD25112 | 48" | 18" | 18" | Dual Locking |
| ITD24617 | 60" | 18" | 18" | Dual Locking |
| ITD24620 | 70" | 18" | 18" | Dual Locking |
Accessories
In the Ditch Workman Storage Box
#ITD-WMSTORAGEB
Adjustable dividers keep tools upright, and drain holes prevent water from collecting and damaging equipment.
In the Ditch Full or Half Shelf Kit
#ITD-SHELFKITS
Customize the interior of your toolbox with this half shelf, creating more organization for smaller tools and accessories.
In the Ditch Heavy Duty Storage Drawers
#ITD-1685
Made from military grade aluminum, these drawers are rated at 500 lbs. to support heavy tools and accessories. Available in four widths, each slide has a lock in/out position to keep from closing as you’re trying to place an object in the drawer.
In the Ditch LED Toolbox Light Kit
#ITD-1728
Add a light so you can see what’s inside your toolbox, no matter the time of day. Thanks to a motion sensor, the timed light shuts off within 15 seconds of door closure, and installation requires no drilling.
In The Ditch Power Locking Toolboxes
Stop fumbling for keys in the dark or at hectic job sites. Secure your PRO Series Under Body Toolbox with the Power Lock remote control option from In The Ditch.
With this add-on, you can now easily lock or unlock your toolboxes with just a single push of a button. The Power Lock option can be wired into your truck’s electric
door locks, so you can auto-lock and auto-unlock your toolboxes when you unlock your truck doors. Scroll down for all the features and sizes available in the ITD PRO Series.
In The Ditch Tool Box Mount (Quick Mount)
- #ITD-QUICK MOUNTS
Product Highlights
Power Lock Remote Control
Easily lock or unlock your toolboxes with a single push of the wireless remote, saving time and effort. There is no need to walk around manually locking each box or struggle to see the lock at night, and frozen locks are no longer an issue. The power lock can also be integrated with your truck’s electric door locks for seamless operation and added convenience.
Heavy-Duty Construction
Built from .120" aluminum, the PRO Series toolbox is twice as thick as most competitor boxes. Its reinforced construction ensures long-lasting durability, making it ideal for demanding work environments where wear and tear are daily adversaries.
Fully Customizable
Pre-drilled for In The Ditch accessories such as shelving, tool brackets and organizers, the toolbox can be fully tailored to your workflow. Simply remove the plastic plug and bolt in your chosen accessory without any drilling. This flexibility allows operators to configure their toolbox exactly how they need it..
Step-Up Door
The weight-rated 400-lb. door doubles as a step, giving operators safe and stable access to rollback beds, truck beds or customer vehicles. This feature enhances efficiency on the job and adds practical functionality.
Waterproof Design
The integrated drip channel and automotive-style bulb seal provide superior protection against rain, snow and moisture. Your tools stay dry and secure, even in harsh outdoor conditions, preserving their longevity and reliability.
Maintenance-Free Hinges
Stainless steel hinges are built to last without requiring regular upkeep. This feature eliminates downtime for maintenance, reduces long-term costs and ensures smooth, dependable operation over the life of the toolbox.
Easy to Open Doors
The single paddle latch allows for effortless, one-handed opening, while the dual two-stage rotary latches ensure a secure seal when closing. This combination delivers both convenience and security, giving operators confidence that their tools are protected.
Air Line and Wire Routing Bracket
Pre-installed brackets provide easy access for air lines, wiring and other connections. This allows operators to quickly plug in tools and equipment without drilling, keeping plumbing and installation clean and efficient.
Specifications
Length, Depth and Height Options
Shelf Kits Options
No Shelf
Full Shelf
Half Shelf
Half Shelf and Jack Bracket
Installation
In The Ditch Mounting Plate for Miliwaukee Packouts
#ITD-23467 | In The Ditch Power Lock Install Kit is used for the Powerlock Toolboxes. You will need (1) ITD-23467 kit per truck build that will have the Powerlock Toolboxes on it. This one kit will control up to 12 boxes. Buy Now
- Kit Includes:
- (1) ITD-23465 Module with 2 Key Fobs
- (1) ITD-23466 Wiring Harness
- (2) ITD-6274 Wire Routing Bracket
- (1) ITD-23501 Module Mounting Plate
Accessories
In The Ditch Mounting Plate for Miliwaukee Packouts
#ITD-PACKMOUNT | The interlocking grid design attaches to any flat surface and allows multiple mounts to be connected together for scaleable storage. Buy Now
In The Ditch Toolbox Dividers
#ITD-1118 | Keep your tools organized with dedicated slots inside your toolbox. Buy Now
In The Ditch Heavy Duty Storage Drawers
#ITD-1685 | These drawers are the perfect size for small tools, preventing them from bouncing around and falling behind other equipment. Buy Now
In The Ditch Aluminum XD Trash Can Mounts
#ITD-1374 | No need to pick up trash twice with these canister brackets. The included bungee cord also keeps the lid tight. Buy Now
In The Ditch Utility Storage Step
In The Ditch 16in Storage Tray
In The Ditch Pro Series Dolly Box
In The Ditch Storage Fenders Stainless Steel Panels
In The Ditch Pro Series Rear Carrier Control Toolbox
In The Ditch Pro Series Rear Carrier Toolbox
ITD Toolbox Dolly Mount
ITD Pro Series Dolly Box
In The Ditch Mounting plate for Milwaukee Packouts
In The Ditch Workman Storage Box
In The Ditch Dolly Drop Down Box (XD Single) Scratched and Dented 2
In The Ditch XD Drop Down Dolly Boxes will save your back from heavy lifting off the deck. The XD drop down dolly box is weather resistant and protects your dollies from snow, ice and road debris. They are easy to use, just pull the aluminum tray out and tilt the tray down. The Box was specifically designed to hold the XD Speed Dolly with 5.70 tires perfectly keeping the hubs and valve stems facing up for easy servicing while in the box. New composite bearings for the sliding/tilting tray were designed to last for years. We also offer a Pro Series Dolly Bunk Kit, ITD-1023 , and a Dolly Box, ITD-1064.
- In The Ditch XD Drop Down Dolly Box
- Weather Resistant
- Protects Dollies from snow, ice and road debris
- Easy to use
- New composite bearings for the sliding/tilting tray were designed from years
- We also offer a Pro Series Dolly Bunk Kit, ITD-1023
- We also offer a Dolly Box, ITD-1064
- Weight: 80 lbs.
- Height: 13"
- Width: 18"
- Aluminum finish
- Sold as each
- For use with 5.70 Tires
In The Ditch Dolly Drop Down Box (XD Single) Scratched and Dented 1
In The Ditch XD Drop Down Dolly Boxes will save your back from heavy lifting off the deck. The XD drop down dolly box is weather resistant and protects your dollies from snow, ice and road debris. They are easy to use, just pull the aluminum tray out and tilt the tray down. The Box was specifically designed to hold the XD Speed Dolly with 5.70 tires perfectly keeping the hubs and valve stems facing up for easy servicing while in the box. New composite bearings for the sliding/tilting tray were designed to last for years. We also offer a Pro Series Dolly Bunk Kit, ITD-1023 , and a Dolly Box, ITD-1064.
- In The Ditch XD Drop Down Dolly Box
- Weather Resistant
- Protects Dollies from snow, ice and road debris
- Easy to use
- New composite bearings for the sliding/tilting tray were designed from years
- We also offer a Pro Series Dolly Bunk Kit, ITD-1023
- We also offer a Dolly Box, ITD-1064
- Weight: 80 lbs.
- Height: 13"
- Width: 18"
- Aluminum finish
- Sold as each
- For use with 5.70 Tires
In The Ditch Dolly Drop Down Box (XD Single) Scratched and Dented 3
Heavy Duty Steel Toolboxes provide superior security, convenience, and protection for whatever you want to store. These 20" tall x 24" deep boxes are great for the newer 102" wide carrier beds and the new Miller Ind. LCG carrier beds.
- Toolbox constructed from 10 ga. aluminum with a 14 ga. stainless steel door
- Features a unique water resistent door gasket
- Stainless steel T-handle latch with lock & key
- Automotive rubber bulb seal
- 4-Sided weather shielded door frame
- Unique gusseted, adjustable chain bracket
In The Ditch Storage Fender 42.75 Rh Scratched and Dented
Right 42-3/4" Storage Fender. Great Looks, great aerodynamics, and secure storage all in one package. We designed these Storage™ Fenders for those who want to keep their trash cans, fuel cans, tire chains, and tools out of sight and secure from theft. We offer these Storage™ Fenders in 4 different lengths. Each Storage™ Fender is made from 1/8" thick aluminum and is designed to hold up to years of abuse. Each Storage Fender has pre-drilled mounting holes that align perfectly with the predrilled holes in our Pro Series™ Tool Boxes. Installation is easy, just remove the plastic plugs in the pre-drilled holes on The ITD Pro Series™ Tool Box and bolt the Storage™ fender to the toolbox using the included bolt kit, it's that simple. Each fender has a replaceable Polished Stainless steel front panel that looks great. If you want to customize your Storage™ Fenders even more just add a gas can or trash can mount inside the storage area.
In The Ditch 16.75" Storage Fender Set, Use w/ 14.5" Quick Mount
In The Ditch Rubber Guard for Storage Fenders
In The Ditch Pro Series Toolboxes
The PRO Series Underbody Toolbox from In The Ditch is a durable and weatherproof storage solution for trucks and trailers with extra space available under their bed and decks. Available in eight lengths, this professional-grade series features a single paddle-latch door with two internal rotary door strikers to keep the door securely closed and sealed from the weather. Pre-drilled holes accommodate In The Ditch accessories so you can customize your storage to fit your tools and equipment. The door itself also boasts a 400-lb. capacity rating so it can double as a step for climbing up on the deck. Besides the length options, these toolboxes come in three heights and depths: 18"H x 18"D, 24"H x 24"D and 18"H x 24"D. Learn more below.
In The Ditch Tool Box Mount (Quick Mount)
- #ITD-QUICK MOUNTS
Product Highlights
Heavy-Duty Construction
Built from .120" aluminum, the PRO Series toolbox is twice as thick as most competitor boxes. Its reinforced construction ensures long-lasting durability, making it ideal for demanding work environments where wear and tear are daily adversaries.
Fully Customizable
Pre-drilled for In The Ditch accessories such as shelving, tool brackets and organizers, the toolbox can be fully tailored to your workflow. Simply remove the plastic plug and bolt in your chosen accessory without any drilling. This flexibility allows operators to configure their toolbox exactly how they need it.
Step-Up Door
The weight-rated 400-lb. door doubles as a step, giving operators safe and stable access to rollback beds, truck beds or customer vehicles. This feature enhances efficiency on the job and adds practical functionality.
Waterproof Design
The integrated drip channel and automotive-style bulb seal provide superior protection against rain, snow and moisture. Your tools stay dry and secure, even in harsh outdoor conditions, preserving their longevity and reliability.
Maintenance-Free Hinges
Stainless steel hinges are built to last without requiring regular upkeep. This feature eliminates downtime for maintenance, reduces long-term costs and ensures smooth, dependable operation over the life of the toolbox.
Easy to Open Doors
The single paddle latch allows for effortless, one-handed opening, while the dual two-stage rotary latches ensure a secure seal when closing. This combination delivers both convenience and security, giving operators confidence that their tools are protected.
Air Line and Wire Routing Bracket
Pre-installed brackets provide easy access for air lines, wiring and other connections. This allows operators to quickly plug in tools and equipment without drilling, keeping plumbing and installation clean and efficient.
Specifications
Length, Depth and Height Options
Shelf Kits Options
No Shelf
Full Shelf
Half Shelf
Half Shelf and Jack Bracket
Accessories
In The Ditch Mounting Plate for Miliwaukee Packouts
#ITD-PACKMOUNT | The interlocking grid design attaches to any flat surface and allows multiple mounts to be connected together for scaleable storage. Buy Now
In The Ditch Toolbox Dividers
#ITD-1118 | Keep your tools organized with dedicated slots inside your toolbox. Buy Now
In The Ditch Heavy Duty Storage Drawers
#ITD-1685 | These drawers are the perfect size for small tools, preventing them from bouncing around and falling behind other equipment. Buy Now
In The Ditch Aluminum XD Trash Can Mounts
#ITD-1374 | No need to pick up trash twice with these canister brackets. The included bungee cord also keeps the lid tight. Buy Now
Toolboxes: Durable Storage Solutions for Every Truck
Finding the right toolbox is more than just picking a storage container; it's about efficiency, security, and durability. At Zip’s, our selection of toolboxes for sale covers everything from automotive toolboxes and service truck toolboxes to heavy-duty tow truck storage solutions. Whether you’re outfitting a fleet, upgrading a single vehicle, or looking for a rugged everyday toolbox, having the right setup keeps your tools organized, protected, and ready for work.
Why Choose a Quality Toolbox
A reliable toolbox does more than hold your tools it helps improve workflow and protects your investment:
- Organization Made Easy – Compartments, drawers, and adjustable shelving make it simple to keep tools sorted and easy to find.
- Durability You Can Trust – Heavy-duty steel, aluminum, and powder-coated finishes withstand daily wear and tear on the job.
- Security – Lockable toolboxes provide peace of mind when leaving tools in vehicles or on the job site.
- Versatility – Available in a variety of sizes and mounting options for service trucks, pickup beds, trailers, and flatbeds.
No matter the type of truck or job, the right toolbox keeps your tools safe and accessible.
Top Brands and Options
We carry trusted brands like Buyers Product Co., Stellar, C-Tech, In The Ditch, Bawer, Phoenix, and Miller Industries. These brands are known for their rugged construction and innovative storage solutions. Some popular general toolbox types include:
- Truck Toolboxes – Ideal for pickup trucks and service vehicles, providing a balance of security and accessibility.
- Automotive Toolboxes – Compact, durable options for on-the-go repairs and maintenance.
- Service Truck Toolboxes – Designed for professionals who need organized storage on larger fleet vehicles.
For specific configurations and accessory options, check out our Toolbox Parts section.
Choosing the Right Toolbox
When selecting a toolbox, consider these key factors:
- Vehicle Type – Ensure the toolbox fits your truck bed, flatbed, or service truck dimensions.
- Material – Aluminum offers lightweight durability, while steel provides maximum strength.
- Accessibility – Drawers, shelves, and side-opening doors can improve efficiency depending on your workflow.
- Capacity – Choose a toolbox that accommodates your current tools and allows room for future additions.
With so many configurations available, it’s possible to tailor a toolbox system that matches your work style and storage needs.
FAQ: Toolboxes
What types of toolboxes are available for trucks?
Toolboxes come in various styles, including deck-mounted, underbody, pickup bed, topsider, pass-through tunnel, and drawer systems.
Can I use a toolbox for multiple vehicles?
Some toolboxes are designed to be vehicle-specific, while others are universal and can be moved between trucks with the right mounting hardware.
What materials are toolboxes made from?
Most toolboxes are made from aluminum or steel, with finishes like powder-coating or diamond tread to resist wear and corrosion.
Do toolboxes include accessories?
Many toolboxes can be customized with accessories like mats, dividers, drawers, and storage bins to improve organization and efficiency.
