Free Shipping!
Free shipping is only valid on total purchases of $199 or more and ground shipments within the contiguous 48 states for products weighing less than 150 lbs. Special handling fees may be required for some products.Shipping fees will be added for all orders under $199 or that include oversized items or any item of 150 lbs or more. Please contact customer service if you have any questions.
0 Item(s)
You have no items in your shopping cart.
-
- Shop Trucks & Trailers
- Shop Apparel
-
Shop Products
- Shop Products
- Towing Straps & Chains
-
Cargo Control
- Cargo Control
- Ratchet Straps & Tie Downs
- Winch Straps
- Flatbed Winches
- Winch Bars
- Transport Chain
- Transport Chain Hooks
- Chain Binders
- D-Rings & Tie Down Anchors
- Cargo Bars, Load Bars & Shoring Beams
- Utility Strap Assemblies
- Safety Flags
- Oversize & Wide Load Signs
- Measuring Sticks
- Cargo Accessories
- DOT Placards & Labels
- HD Truck Accessories
- Ratchets & Hardware
- Rigging & Recovery Supply
- Auto & Truck Service
- Battery Service
- Winch Lines & Hardware
- Towing Accessories
- Lockout Tools
- Tow Lights
- Emergency & Warning Lighting
- Work & Truck Lighting
- Hoses & Reels
- Safety Supplies
- Winches
- Toolboxes & Storage
-
Truck Chassis Accessories
- Truck Chassis Accessories
- Push Bumpers, Guide Lights, & Hardware
- Cameras
- Seat Covers
- Alarms & Horns
- Wheel Simulators & Hub Parts
- Tire & Wheel Supply
- Fenders
- Mico Brake Locks
- Mud Flaps
- Push Bumpers, Guide Lights, & Hardware
- Sunvisors & Mirrors
- Spring & Suspension Enhancement
- Throttle Controls
- Running Boards
- Aftermarket Fuel Tanks
- Mobile Office Vehicle Mounts
- Hitches & Accessories
- Cab Protectors & Truck Racks
- Snow Removal, Dump Bodies, & Lift Gates
- Shop Supplies
- Car Hauler Trailer Supply
- Clearance Products
-
Shop Repair Parts
- Shop Repair Parts
- Car Hauler Trailer Parts
-
Car Carrier Parts
- Car Carrier Parts
- Wheel Lift L-Arms, Outer Crosstubes & Hardware
- Pivot Pin Kits
- Wear Pad Kits
- Control Assemblies & Hardware
- Cylinder & Pin Replacement
- Tail Light Assemblies & Wiring Harnesses
- Hydraulic Valve Bodies & Service Parts
- Car Carrier Winch Repair Parts
- Removable Side Rail Replacement
- Bed Lock Hardware & Tie-Down Anchors
- Carrier Light Pylons
- Carrier Body Lighting
-
Light Duty Wrecker Parts
- Light Duty Wrecker Parts
- WheelLift L-Arms, Receivers & Hardware
- Fender Flares & Fender Flares HD
- Boom End Sheaves, Guides, & Hardware
- Cylinder and Pin Replacement
- Control Hardware
- Control Valve Bodies & Hardware
- Hydraulic Pumps, Outriggers & Repair Parts
- Control Cables & Cable Springs
- Body Lighting
- Wrecker Light Pylons
-
Medium / Heavy Wrecker Parts
- Medium / Heavy Wrecker Parts
- WheelLift L-Arms, Crossbars, Receivers & Hardware HD
- Boom End Sheaves, Guides & Hardware HD
- Cylinder and Pin Replacement HD
- Control Valve Bodies & Hardware HD
- Cable Storage Springs HD
- Remote Controls HD & Control Cables HD
- Body Lighting HD
- Wrecker Light Pylons HD
- Hydraulic Outriggers & Repair Parts HD
- Zacklift Main Body Repair Parts
- Zacklift Inner Main Repair Parts
- Zacklift Horizontal Repair Parts
- Zacklift Grid Head Repair Parts
- Zacklift Mounts & Hardware
- Snow Plow Repair Parts
- Lighting
- Tow Dolly Parts
- Automotive Positioning Dolly Parts
- Hydraulic Hardware
- Electrical Hardware
- Wheel Simulator Repair Parts
- Diesel Emission Products
- Winch Repair Parts
- Toolbox Repair Parts
- Cable & Hose Management Repair Parts
-
Shop by Parts Schematics
Order Direct from a parts diagram
-
- Shop Trucks & Trailers
- Shop Apparel
-
Shop Products
- Shop Products
- Towing Straps & Chains
-
Cargo Control
- Cargo Control
- Ratchet Straps & Tie Downs
- Winch Straps
- Flatbed Winches
- Winch Bars
- Transport Chain
- Transport Chain Hooks
- Chain Binders
- D-Rings & Tie Down Anchors
- Cargo Bars, Load Bars & Shoring Beams
- Utility Strap Assemblies
- Safety Flags
- Oversize & Wide Load Signs
- Measuring Sticks
- Cargo Accessories
- DOT Placards & Labels
- HD Truck Accessories
- Ratchets & Hardware
- Rigging & Recovery Supply
- Auto & Truck Service
- Battery Service
- Winch Lines & Hardware
- Towing Accessories
- Lockout Tools
- Tow Lights
- Emergency & Warning Lighting
- Work & Truck Lighting
- Hoses & Reels
- Safety Supplies
- Winches
- Toolboxes & Storage
-
Truck Chassis Accessories
- Truck Chassis Accessories
- Push Bumpers, Guide Lights, & Hardware
- Cameras
- Seat Covers
- Alarms & Horns
- Wheel Simulators & Hub Parts
- Tire & Wheel Supply
- Fenders
- Mico Brake Locks
- Mud Flaps
- Push Bumpers, Guide Lights, & Hardware
- Sunvisors & Mirrors
- Spring & Suspension Enhancement
- Throttle Controls
- Running Boards
- Aftermarket Fuel Tanks
- Mobile Office Vehicle Mounts
- Hitches & Accessories
- Cab Protectors & Truck Racks
- Snow Removal, Dump Bodies, & Lift Gates
- Shop Supplies
- Car Hauler Trailer Supply
- Clearance Products
-
Shop Repair Parts
- Shop Repair Parts
- Car Hauler Trailer Parts
-
Car Carrier Parts
- Car Carrier Parts
- Wheel Lift L-Arms, Outer Crosstubes & Hardware
- Pivot Pin Kits
- Wear Pad Kits
- Control Assemblies & Hardware
- Cylinder & Pin Replacement
- Tail Light Assemblies & Wiring Harnesses
- Hydraulic Valve Bodies & Service Parts
- Car Carrier Winch Repair Parts
- Removable Side Rail Replacement
- Bed Lock Hardware & Tie-Down Anchors
- Carrier Light Pylons
- Carrier Body Lighting
-
Light Duty Wrecker Parts
- Light Duty Wrecker Parts
- WheelLift L-Arms, Receivers & Hardware
- Fender Flares & Fender Flares HD
- Boom End Sheaves, Guides, & Hardware
- Cylinder and Pin Replacement
- Control Hardware
- Control Valve Bodies & Hardware
- Hydraulic Pumps, Outriggers & Repair Parts
- Control Cables & Cable Springs
- Body Lighting
- Wrecker Light Pylons
-
Medium / Heavy Wrecker Parts
- Medium / Heavy Wrecker Parts
- WheelLift L-Arms, Crossbars, Receivers & Hardware HD
- Boom End Sheaves, Guides & Hardware HD
- Cylinder and Pin Replacement HD
- Control Valve Bodies & Hardware HD
- Cable Storage Springs HD
- Remote Controls HD & Control Cables HD
- Body Lighting HD
- Wrecker Light Pylons HD
- Hydraulic Outriggers & Repair Parts HD
- Zacklift Main Body Repair Parts
- Zacklift Inner Main Repair Parts
- Zacklift Horizontal Repair Parts
- Zacklift Grid Head Repair Parts
- Zacklift Mounts & Hardware
- Snow Plow Repair Parts
- Lighting
- Tow Dolly Parts
- Automotive Positioning Dolly Parts
- Hydraulic Hardware
- Electrical Hardware
- Wheel Simulator Repair Parts
- Diesel Emission Products
- Winch Repair Parts
- Toolbox Repair Parts
- Cable & Hose Management Repair Parts
-
Shop by Parts Schematics
Order Direct from a parts diagram
Looking for apparel? Shop Zip's Outfitters
0 Item(s)
You have no items in your shopping cart.
Related products
Miller Tool Box and Oil Tank MTG. Bracket (Right)
Toolbox mounting bracket for right side with integrated reservoir mount.
$118.99
In The Ditch Air Line and Wiring Bracket
This Air Line and Wiring Bracket from In The Ditch connects to any tool box to
provide a covered channel to run wires out of the tool box for lighting. An
airline can also be run through the bracket to provide an easy to access
airline connection.
$35.99
Buyers Welded Black Structural Carbon Steel Toolbox Mount
Buyers Welded Black Structural Carbon Steel Toolbox Mount
$94.99
–
$131.99
Phoenix Heavy Duty Side Mount Brackets
One Pair of Heavy Duty Side-Mount Style Brackets for Phoenix ToolBox.
$155.99
Stellar Riser Kit
American Eagle 2" or 14" Riser Kit (2 per kit). The slotted mounting holes
allow quick installation. They are used in Zip's road service bodies.
$94.99
–
$110.79
In The Ditch Quick Mount Replacement
By using our Quick Hange Tab you will cut tool box installation time in half.
With our Innovative Quick Hang Tab you won t have to use jacks any more. Just
hang the mount on the frame rail and set the tool box on, it s that simple.
$20.79
In The Ditch LED Toolbox Light Kit
Having issues seeing inside your ITD toolbox? This In The Ditch LED Toolbox Light Kit is the perfect fit! Designed to make the users life easy! As soon as the toolbox door is opened, the 36” LED strip will light the entire box. Once you’re done you just shut the toolbox door and the timer will shut the light off (about 15 seconds), no more forgetting your toolbox lights on. This kit is so simple to install, there is no drilling or cutting required and its shipped out the ITD Air Fitting and Wire Routing Bracket so you have a nice clean finished look after you install. This LED Light Kit will light up any toolbox or dark space with 12-volt access.
$160.99
Zip's Toolbox Mount Bracket Galvanized LR-2
These Galvanized Toolbox Mounting Bracket easily mounts toolboxes on
rollbacks or carriers. It is used for 20" or 24" deep underbody toolboxes on car
carrier beds. Sold as a pair.
$127.99
–
$189.99
Zip's Special Toolbox Mounting Bracket LR-5
Note: Special Handling Fees Apply for Specific Items
Easily mount toolboxes on rollbacks or carriers. Used for 24" X 24" toolboxes on car carrier beds.
Easily mount toolboxes on rollbacks or carriers. Used for 24" X 24" toolboxes on car carrier beds.
- 24"X24" or 24"X30"
- Pre drilled holes
- Sturdy steel angle iron
- Sold as each
Available in the following sizes
Item # Size Finish LR-2G 24" x 24" Galvanized LR-5 24" x 24" Powder Coated Black LR-5TG 24" X 30" Tall Galvanized LR-5T 24" X 30" Tall Powder Coated Black
$178.99
–
$240.99
Zip's Toolbox Mount Bracket LR-1
Easily mount toolboxes on rollbacks or carriers. Used for underbody
toolboxes on car carrier beds.
$132.99
–
$190.99
Zip's LR-6G Galvanized Center Toolbox Mount Bracket
Available in the following sizes
| Item # | Size | Finish |
|---|---|---|
| LR-6G | 20" X 24" | Galvanized |
| LR-6 | 20" X 24" | Powder Coated Black |
| LR-6TG | 24" x 24" | Tall Galvanized |
| LR-6T | 24" x 24" | Tall Powder Coated Black |
$208.99
–
$256.99
In The Ditch Tool Box Mount (Quick Mount)
Note: Special Handling Fees Apply for Specific Items
Cut tool box installation time by more than half with this In The Ditch's Quick Mount. This Quick Mount has been the perfect choice for those who have one of the new low profile car carrier beds. In The Ditch made the mounting arms longer so you can drop the box down further to clear low profile beds. The Quick Mount has a unique low profile which will allow them to work with either inboard or outboard tilt cylinders. This Quick Mount is made from steel and come in a tuff coat black finish.
Recommend 2 mounts for 24" to 60" tool boxes and 3 mounts for 70" on up tool boxes
In The Ditch Mount Spacer (Only) - #ITD-6340
Cut tool box installation time by more than half with this In The Ditch's Quick Mount. This Quick Mount has been the perfect choice for those who have one of the new low profile car carrier beds. In The Ditch made the mounting arms longer so you can drop the box down further to clear low profile beds. The Quick Mount has a unique low profile which will allow them to work with either inboard or outboard tilt cylinders. This Quick Mount is made from steel and come in a tuff coat black finish.
Recommend 2 mounts for 24" to 60" tool boxes and 3 mounts for 70" on up tool boxes
- The Ditch Tool Box Quick Mounts Only (Brackets sold separately)
- Works well with new Low Profile Car Carrier Beds
- Made from steel with a tuff coat black finish
- Sold as each (Not a pair)
- ITD-1581- Height: 14 9/16" Width: 7 1/8" Length: 27 3/4"
- ITD-1584- Height: 16 1/2" Width: 5 1/4" Length: 32 1/2"
- ITD-1588 and ITD-1588-GLV- Height: 18 1/2" Width: 5 1/4" Length: 32 1/2"
- ITD-1580 and ITD-1850-GLV- Height: 20 1/2" Width: 5 1/2" Length: 32 1/2" Please see photos above for extra dimensions
Dimensions For Mounts:
Following Parts Sold Separately:
In The Ditch Mount Spacer (Only) - #ITD-6340
$178.99
–
$216.99
Zip's Toolbox Mounting Bracket LR-4
This is a special toolbox mount that is used when the toolbox needs to be slid
forward to miss the leaf spring mounts. Still easily mount toolboxes on
rollbacks or carriers. Used for 18" X 18" toolboxes. Sold as each.
$147.99
–
$183.99
Zip's Galvanized Center Tool Mount Bracket LR-3
Easily mount (2) toolboxes side by side (1) LR-1 and (1) LR-3. Used for
underbody toolboxes on car carrier beds.
$209.99
–
$242.99
Miller Tool Box and Oil Tank MTG. Bracket (Left)
Toolbox mounting bracket for left side with integrated reservoir mount.
$118.99
Miller Tool Box and Oil Tank MTG. Bracket (Right)
Toolbox mounting bracket for right side with integrated reservoir mount.
$118.99
In The Ditch Air Line and Wiring Bracket
This Air Line and Wiring Bracket from In The Ditch connects to any tool box to
provide a covered channel to run wires out of the tool box for lighting. An
airline can also be run through the bracket to provide an easy to access
airline connection.
$35.99
Buyers Welded Black Structural Carbon Steel Toolbox Mount
Buyers Welded Black Structural Carbon Steel Toolbox Mount
$94.99
–
$131.99
Phoenix Heavy Duty Side Mount Brackets
One Pair of Heavy Duty Side-Mount Style Brackets for Phoenix ToolBox.
$155.99
Stellar Riser Kit
American Eagle 2" or 14" Riser Kit (2 per kit). The slotted mounting holes
allow quick installation. They are used in Zip's road service bodies.
$94.99
–
$110.79
In The Ditch Quick Mount Replacement
By using our Quick Hange Tab you will cut tool box installation time in half.
With our Innovative Quick Hang Tab you won t have to use jacks any more. Just
hang the mount on the frame rail and set the tool box on, it s that simple.
$20.79
In The Ditch LED Toolbox Light Kit
Having issues seeing inside your ITD toolbox? This In The Ditch LED Toolbox Light Kit is the perfect fit! Designed to make the users life easy! As soon as the toolbox door is opened, the 36” LED strip will light the entire box. Once you’re done you just shut the toolbox door and the timer will shut the light off (about 15 seconds), no more forgetting your toolbox lights on. This kit is so simple to install, there is no drilling or cutting required and its shipped out the ITD Air Fitting and Wire Routing Bracket so you have a nice clean finished look after you install. This LED Light Kit will light up any toolbox or dark space with 12-volt access.
$160.99
Zip's Toolbox Mount Bracket Galvanized LR-2
These Galvanized Toolbox Mounting Bracket easily mounts toolboxes on
rollbacks or carriers. It is used for 20" or 24" deep underbody toolboxes on car
carrier beds. Sold as a pair.
$127.99
–
$189.99
Zip's Special Toolbox Mounting Bracket LR-5
Note: Special Handling Fees Apply for Specific Items
Easily mount toolboxes on rollbacks or carriers. Used for 24" X 24" toolboxes on car carrier beds.
Easily mount toolboxes on rollbacks or carriers. Used for 24" X 24" toolboxes on car carrier beds.
- 24"X24" or 24"X30"
- Pre drilled holes
- Sturdy steel angle iron
- Sold as each
Available in the following sizes
Item # Size Finish LR-2G 24" x 24" Galvanized LR-5 24" x 24" Powder Coated Black LR-5TG 24" X 30" Tall Galvanized LR-5T 24" X 30" Tall Powder Coated Black
$178.99
–
$240.99
Zip's Toolbox Mount Bracket LR-1
Easily mount toolboxes on rollbacks or carriers. Used for underbody
toolboxes on car carrier beds.
$132.99
–
$190.99
Zip's LR-6G Galvanized Center Toolbox Mount Bracket
Available in the following sizes
| Item # | Size | Finish |
|---|---|---|
| LR-6G | 20" X 24" | Galvanized |
| LR-6 | 20" X 24" | Powder Coated Black |
| LR-6TG | 24" x 24" | Tall Galvanized |
| LR-6T | 24" x 24" | Tall Powder Coated Black |
$208.99
–
$256.99
In The Ditch Tool Box Mount (Quick Mount)
Note: Special Handling Fees Apply for Specific Items
Cut tool box installation time by more than half with this In The Ditch's Quick Mount. This Quick Mount has been the perfect choice for those who have one of the new low profile car carrier beds. In The Ditch made the mounting arms longer so you can drop the box down further to clear low profile beds. The Quick Mount has a unique low profile which will allow them to work with either inboard or outboard tilt cylinders. This Quick Mount is made from steel and come in a tuff coat black finish.
Recommend 2 mounts for 24" to 60" tool boxes and 3 mounts for 70" on up tool boxes
In The Ditch Mount Spacer (Only) - #ITD-6340
Cut tool box installation time by more than half with this In The Ditch's Quick Mount. This Quick Mount has been the perfect choice for those who have one of the new low profile car carrier beds. In The Ditch made the mounting arms longer so you can drop the box down further to clear low profile beds. The Quick Mount has a unique low profile which will allow them to work with either inboard or outboard tilt cylinders. This Quick Mount is made from steel and come in a tuff coat black finish.
Recommend 2 mounts for 24" to 60" tool boxes and 3 mounts for 70" on up tool boxes
- The Ditch Tool Box Quick Mounts Only (Brackets sold separately)
- Works well with new Low Profile Car Carrier Beds
- Made from steel with a tuff coat black finish
- Sold as each (Not a pair)
- ITD-1581- Height: 14 9/16" Width: 7 1/8" Length: 27 3/4"
- ITD-1584- Height: 16 1/2" Width: 5 1/4" Length: 32 1/2"
- ITD-1588 and ITD-1588-GLV- Height: 18 1/2" Width: 5 1/4" Length: 32 1/2"
- ITD-1580 and ITD-1850-GLV- Height: 20 1/2" Width: 5 1/2" Length: 32 1/2" Please see photos above for extra dimensions
Dimensions For Mounts:
Following Parts Sold Separately:
In The Ditch Mount Spacer (Only) - #ITD-6340
$178.99
–
$216.99
Zip's Toolbox Mounting Bracket LR-4
This is a special toolbox mount that is used when the toolbox needs to be slid
forward to miss the leaf spring mounts. Still easily mount toolboxes on
rollbacks or carriers. Used for 18" X 18" toolboxes. Sold as each.
$147.99
–
$183.99
Zip's Galvanized Center Tool Mount Bracket LR-3
Easily mount (2) toolboxes side by side (1) LR-1 and (1) LR-3. Used for
underbody toolboxes on car carrier beds.
$209.99
–
$242.99
Miller Tool Box and Oil Tank MTG. Bracket (Left)
Toolbox mounting bracket for left side with integrated reservoir mount.
$118.99
Newsletter
Information
Product Support
Customer service
Copyright © 2025 Zip's. All Rights Reserved. Seller reserves the right to adjust prices or correct errors. Privacy Policy