Side Pullers and Recovery Tools

The ITD Wire Rope Tie-Back Spring Tube is perfect for securing the winch-line from your central boom, and prevents the line from dangling or bouncing around. Can be used on both the SP9000 and the SP12000.

This pylon is designed to fit all SP series sidepullers. It is made from steel and comes standard with stainless steel mounting hardware. It features laser cut holes for mounting work lights and is painted in a tuff coat gloss black finish. This pylon will need to have the In the Ditch light pylon mounting base installed on the sidepuller in order to mount this pylon.

This is a polished stainless steel dress-up kit for the SP9000 sidepuller by In the Ditch. This dress-up kit will set your truck off and give it the custom look you want. These accent panels are laser cut from polished stainless steel and have 3-M double sided tape already installed. Each kit includes two boom accent panels, two leg accent panels with pinch point decals installed on them.

This is a replacement rear accent panel for the SP8500/SP9000 Sidepuller. The panel is made out of polished stainless steel, with a mirrored finish.

The Number 1 Selling Brand of SidePullers in the World just added a new model. The all new SP8500 Side Puller was designed exclusively for the Dodge 4500/5500 2wd & 4wd Chassis, the International CV Series 2WD Chassis, as well as the Chevrolet 4500HD/5500HD 2WD Chassis. The SP8500 SidePuller is designed to work with chassis frame heights from 29"-33-3/4" tall making the SP8500 a perfect fit for the light medium duty market. The SP8500 fills that need for 4x2 & some 4x4 Chassis under 23,500 GVWR. When it comes to strength of design, the SP8500 is best in class in every aspect. No other Side puller will out pull, out work, or outperform the SP-Series line of Side Pullers by In The Ditch.

This is a polished stainless steel dress-up kit for the SP20000 sidepuller by In the Ditch. This dress-up kit will set your truck off and give it the custom look you want. These accent panels are laser cut from polished stainless steel and have 3-M double sided tape already installed. Each kit includes two boom accent panels, two leg accent panels with pinch point decals installed on them.

The Optional SP8500 Light Pylon is available in 3 Widths 54", 60", and 70". These pylons can easily be mounted to the SP8500 Pylon Mounts and can be adjusted up and down to get the perfect height for you light bar. Each pylon comes in our ITD Endurance Black Powder Coat Finish and Includes all Mounting Hardware.

This is a SP20000 Sidepuller with integrated controls that is ready to install. Zip's Truck Equipment provides you with this sidepuller, from In the Ditch, with everything you will need. Just supply incoming hydraulic pressure, a hydraulic return line, and connect a 12 volt power supply and you are done! It is that easy!

SP12000 Ratings: Boom: 12,000 lbs. Stabilizer Leg (each): 12,000 lbs. Winch: 12,000 lbs. Wire Rope: 7/16" X 100' Steel Core Shipping Weight: 1500 lbs.Chassis Recommendations: Chassis GVRW: Class 7 - 26,000 - 33,000 lbs. Recommended Minimum Additional Cab to Axle Spacing (Carriers): 18" Recommended Minimum Additional Cab to Axle Spacing (Wreckers): 17" Min - Max Frame Height: 36" - 42" Min - Max Frame Width: 33-3/4" to 34-3/4"Standard Features of the SP12000 (with Integrated Controls): 12,000 lb. Warn High speed Severe Duty Planetary Winch 7/16" x 100 Steel Core Rope Winch Free Spool Handle (Easy Reach/Easy Pull) Winch Tensioner Plate (8) Tie Back Points Tuff Coat Gloss Black Finish Wireless Remote Control w/ 1,000' Range Completely Plumbed and Ready for Installation Hydraulic Stabilizer Legs with Lock Valve Safety Features Self-Leveling Pavement Pads on Stabilizer Legs Fold Down Ground Penetrating Grousers on Stabilizer Legs Adjustable light bar Mount Wire Routing System Allows easy Wiring from Light Bar to Chassis Center Recovery Boom Head Outer Recovery Boom Head

This is a polished stainless steel dress-up kit for the SP12000 sidepuller by In the Ditch. This dress-up kit will set your truck off and give it the custom look you want. These accent panels are laser cut from polished stainless steel and have 3-M double sided tape already installed. Each kit includes two boom accent panels, two leg accent panels with pinch point decals installed on them.

These pylon mounts by In the Ditch are a great option for people who want to install SP Series light pylons to SP Sidepullers. This mount will fit all models of the SP Series sidepullers. This item includes 2 mounts and requires the customer to weld on.

This SP Series Swept Wing Pylon was designed for those who want the maximum in looks, performance and lighting options. Zip's offers this 91" wide light pylon from In the Ditch. This pylon will get your lights out to the side of your truck. With the swept wings, you not only get good looks, you also get a perfect place to mount additional warning lights. These pylons have laser cut holes in the underside so you could easily mount alley lights on the swept wings. It includes stainless steel accent panels so you can cover up the wiring on the underside of the pylon. It is paint with a Tuff Coat Black finish so it is ready to go when you receive it.

This is a replacement pin that is used to hold the removable foot in place on the Inner Leg Assembly in the SP20,000 Sidepuller.