WheelLift L-Arms, Crossbars, Receivers & Hardware HD

Improve grip on icy or slippery surfaces on a scotch block, wheel lift or stabilizer spade with this replacment blade from Zip's AW Direct.

This is a replacement retainer pin assembly for the Century 3224 medium duty wrecker by Miller Industries. This pin is used to hold on the fork adapters on to the wheel lift crossbar.

Safety Chain Roller Kit for All Large Miller Wrecker Bodies Excluding Rotators.

This Outrigger Blade from Miller Industries is a Wheel Lift Attachments. It is used on the assembly of Century, Challenger and Holmes Wreckers. Please see the features below for a list of wreckers and see the brochure tab for breakdowns.

Miller Industries 25,000 lb. Tire Lift For The Century 7035, 9055 and Rotator Series, Vulcan V-70, V-100 and Challenger's Complete Line of Towing and Recovery units (5" x 5" Crossbar). This New Tire Lift (124002808) Will Include The Upgraded Crossbar (124002838) When Ordered On With A New Wrecker Unit.

This zinc-plated mild steel L-Arm from Miller Industries fits the wheel lifts on Vulcan 896 and 897 medium-duty wreckers. Also known as a tire restraint or wheel retainer, this adjustable 2" x 3" L-Arm fits the outer crosstube (Part No. 12-4008002). This adjustable L-Arm offers a capacity of 6,000 lbs. as a pair and is angled in and down more for clearance on smaller vehicles.

Zip's Custom Hydraulic Rear Stiff Leg Kit. Designed for add-on installation on 12 ton or smaller light wreckers. Will fit on either conventional or self-loading small wreckers. Zip's custom legs features a compact design with an extra wide flipper foot. The kit includes hydraulic legs, flipper foot, built in tie-back anchor, low pull D-ring, electric control valve, wired lanyard controller. *Mid-Leg D-ring is available but NOT included in kit.

Replacement Blade, wheel lift spade and stiff leg. 16" long with 4 mounting holes.

This Miller replacement grader blade is used on the rear outriggers of all Century Heavy Duty Integrated Wreckers. This is the blade used on Century Wrecker Models: 4024, 5130, 5230, 7035, and 9055.

This Miller replacement grader blade set is used on the rear outriggers of all Century Heavy Duty Integrated Wreckers. This is the blade used on Century Wrecker Models: 4024, 5130, 5230, 7035, and 9055. Kit includes 2 blades and mounting hardware.

Miller Industreis crossbar die spring spacer for HD wreckers. Click on the brochure tab to see the part schematic of this item.

The "Ground Penetrating Plate" Is Designed To Be Used On Front Foot of Rotators or XPs, and On The Rear Spades Of Century Integrated and HD Fixed-Boom Units. The Sole Purpose Of The Single Pad Is To Dig Into Asphalt, Ice, Etc. Field Testing Has Proven It To Be A Valuable Tool In These Conditions.

Detent kit for Century 3224 and 4024 underlifts. Helps hold the crossbar straight when not loaded. Kit includes ball, spring, and spacer.

Spade attachment for a 1060S Century Rotator Series. This spade attachment is for the rear outrigger. Used to help improve stability and traction. The spade attatchment is interchangable with the rear foot.

Miller Industries Hook End Cap. Fits a Century 4024 Wrecker with a 4" crossbar. Sold as Pairs.

We get it. Tow operators get in a hurry when they're under pressure. Law enforcement is often breathing down their neck, and they want to get the road open as soon as possible. Mistakes can happen, and the wrong hydraulic lever can be pulled. If they’re not paying attention, an expensive steel winch line can be accidentally stretched the tieback hook normally is the failure point and compromised, ultimately putting it out of service.

This replacement retainer pin assembly secures 2" fork lift adapters on heavy-duty underreaches. Featuring a cable lanyard and removable spring clip, the pin assembly ensures adapters are inserted properly and secured for transport, thus increasing safety for the tow operator and motoring public.

This Miller Industries Side Pull Stabilizer is designed to pin on and off the multiposition rear spades on the Century and Challenger integrated and fixed boom heavy duty towing and recovery units. The side pull stabilizer provides additional stability on side and corner pull applications. (One per kit)

This part can be used to replace Part Number 12-0802232.

Vulcan heavy duty V40, V50, V60, V70, V90 and V100 5" x 5" crossbar.

The Sure-Stop is designed to help the driver unfold and lower the wheel lift to a pre-set working position. The kit includes one control module and two limit switches. One limit switch stops the wheel lift when it unfolds the desired preset level while the second stops the boom when it reaches the desired preset height. The control module works by interrupting the power to the solenoid valve when a limit switch has been closed.This kit will help speed up your recovery time by helping you position your wheel lift in seconds and it will reduce damage to your equipment and the roadway under it.

This 7" replacement spring fits the Zip's Tie-Back Tube for Vulcan V24 and Century 312 12-ton wreckers. This spring plays a vital role in protecting the winch and winch line and preventing equipment damage in case the wrong lever is mistakenly pulled. By design, this internal spring fits inside the tie-back tube and provides adequate slack or cushion. When installed correctly, the spring should also give ample audible warning to alert the tow operator to stop the winch operation.

Give the wheels on your tow dollies a place to rest on the deck of your light-duty wrecker with this pair of aluminum tire stands from Zip's. This replacement part works with the Zip's Lift Assist Dolly Mount (Item # ZP-DM-SL) and is the only adjustable tire mount available on the market. The top plate on these two-piece brackets is contoured to the shape of the tire, and both stands are mounted to the surface of the deck. Each side of the cradle is slotted for adjustability. Simply loosen the four bolts and slide the bracket to the desired height.

Miller Industries "Remove Before Towing" tag used on Vulcan Heavy Wreckers

Spring for pushbutton on Century Snap-L outer crosstube