Rigging & Recovery Supply

Make your recoveries easier with The RimSling! This synthetic rope sling is designed slimmer yet has a higher . The RimSling has a protective Cordura Sleeve over the entire sling giving it maximum protection. Also, it has a special braid guard at the center of the sling providing extended life. A 6" sling eye is located on either end of the sling. The RimSling is also Made in the USA!

Zips Endless Round Slings feature a Safety Factor of 5:1. The inner core is made from high-tensile polyester fiber to provide the maximum possible strength. Each sling is color coded according to capacity. See drop down menu for available lengths. See chart for sling capacity.

Endless synthetic slings are made from a continuous loop of polyester and jacketed in a double layer of polyester. Internal red warning fibers alert you of damage should the sling become torn or damaged.

These Snatch Blocks have a Swivel Shackle attached to a chain. The chain also has a Grab Hook attached at the end of it. Use snatch blocks to change the direction or gain a mechanical advantage over the load being moved. B/A's snatch blocks all feature bronze bushings with grease fittings.

Note: Special Handling Fees Apply for Specific Items

Synthetic endless round slings are lightweight and pliable for easy rigging and storage. They are made from polyester yarn covered by a double wall tubular jacket. They are seamless and have a soft cover that won't scratch a load's surface. Slings are color-coded for different capacities to be more convenient when you need to make a fast decision on the job.

Zip's snatch blocks with a swivel shackle and 30 inches of chain provide versatility for tow operators at a recovery scene. The combination chain, snatch block and grab hook help change the direction of the tow or gain an advantage over the disabled vehicle. See the drop-down menu for available sizes and working load limits.

These Eye Slings feature a texturized, abrasion-resistant nylon jacket that covers the sling body where abrasion is a problem. Maintains the basic Tuflex features and forms two color-coded lifting eyes. Meets ASME-B30.9 standards and regulations. Read details on pg. 7 and 8 in brochure.

Zip's high-quality, low-cost snatch blocks are available in four rope sizes with working load limits up to 30,000 lbs. These blocks also feature a spring-loaded latch that adds a layer of safety to the recovery scene. See the drop-down menu for available sizes and working load limits.

This Screw Pin Anchor Shackle is made from alloy and is easy to remove. Use this shackle when repairing links or fitting attachments. It has an open throat design and requires no special tools to use.

Make the time it takes to winch a wreck shorter with the All-Grip Snatch Blocks with a Chain and Grab Hook. With its 30” chain, this assembly offers an easy attachment point. Plus, it makes it easier to adjust the direction of the winch without having to adjust your truck.

Zip's Eye/Eye Round Slings feature a Safety Factor of 5:1. The inner core is made from high-tensile polyester fiber to provide the maximum possible strength. Each sling is color coded according to capacity. See drop down menu for available lengths. See chart for sling capacity.

These Grade 100 Chain Assemblies come with a Cradle Grab Hook attached to each end of each chain. Cradle Grab Hooks are far more superior than standard grab hooks. Grade 100 chain is made from alloy steel and is extremely strong, 25% higher work load limit than grade 80, making it ideal for recovery or lifting.

These straps are made from durable Tuff-Edge II material that resists cuts and abrasions. Choose the single-ply versions for lighter loads or the double-ply versions that have higher WLL ratings for heavier loads.

B/A's patented Twist Lock design is easy to install and easy to use. It has the most secure latch on the market which prevents accidental release of the chain from the hook connection and inadvertent re-hooking. These hooks can be used in place of slip hooks.

These B/A Synthetic Super Slings are super strong, versatile and are offered in 4 sizes to suit your individual needs. They are an endless loop style with a full length floating protective sleeve that provides protection against damage and wear to the sling.

When recovering a vehicle with a car carrier rollback, the Zip's Side Puller Recovery Tool allows your truck to remain parallel with the road and keeps traffic flowing, taking up less roadway with winch angles off the rear of the deck. The Zip's Side Puller Recovery Tool has a unique design that allows the operator quick and easy usage - no installation labor required! It can be locked into position utilizing the standard key slot holes along the rear approach plate on all Miller Industries 10, 12 and 16 Series STEEL car carriers. It is secured in place with a hitch pin and hairpin cotter pin.

With 17 different sizes, you can find one of Crosby’s Anchor Shackle Screw Pin for you. So, for whatever situation you need it, you can pick one up for it. Plus it’s forged, quenched and tempered, with alloy bolts. Also, the sizes that are 3/8"" and below are mechanically galvanized, making it even more durable.

Leaving tools behind is a pain. That’s why the All-Grip Snatch Block w/ Swivel Hook is painted hi-vis green so you can’t miss it. The snatch block also comes with a hook latch so it’s ready to be used right out of the box. Finally, this snatch block combines a forged hook and yokes, increasing its strength and durability.

Color-coded by working load limit, the All-Grip Endless Loop Eye Sling gives you a high amount of convenience. With a working load limit of up to 21,200 pounds (check the drop-down menu for more information), you can take on a heavy load with ease. Because it’s made of polyester, those heavy loads won’t get scrapes and damage from the sling.

Note: Special Handling Fees Apply for Specific Items

These Grade 80 Chain assemblies include a Grab Hook at each end for length adjustability.

These Snatch Blocks have a Swivel Shackle with a 30" x 5/16" Grade 70 Chain. The chain also has a Twist Lock Grab Hook attached at the end of it. Use snatch blocks to change the direction or gain a mechanical advantage over the load being moved. B/A's snatch blocks all feature bronze bushings with grease fittings.

The 420 Champion Series snatch blocks from McKissick are perfect for heavy duty rigging operations because they greatly improve your winches function and pulling power. The hooks and side plates are made from forged alloy steel that is also heat treated. This makes the blocks exceptionally durable while keeping them as light as possible. Each of these sizes will fit a 3/4" - 7/8" wireline. The opening feature permits the insertion of a rope line while the block is suspended from a gin-pole. The side plates on these snatch blocks have been designed to eliminate the possibility of a rope jamming.

Zip's 12 piece round sling kit. This kit features 12 slings of various lengths and ratings to meet your needs. Complete this kit with the 124002706Z screw pin shackle kit.

Zips Recovery Straps offer strength while also conforming and supporting load. This creates an environment for easier and more efficient recoveries. The sewn cordura sleeve on the eye offers added protection against tears and abrasions.

Grade 100 coupling links from Zip's are the preferred choice to attach hooks to chain. See the drop-down menu for available sizes and working load limits.

B/A's recovery straps are the premier straps in the industry. Made from double ply webbing, they offer the best in strength, yet this soft pliable webbing conforms and supports the load - making your recovery job easier. All straps are made with heavy duty polyester and have lined eyes for superior wear protection.

These grade 80 chain assemblies come equipped with a Grab Hook connected on each end. Some standard uses for this assembly are chain to chain hooking, equipment safety, tie-down, over-the-road safety and vehicle stabilization.

These Snatch Blocks from Yoke come with a Swivel Hook and Heavy Duty Latch. Yoke snatch blocks are manufactured from the highest quality tensile steel. Bronze bushings and grease fittings allow for ease of use and extended sheave life. All blocks are 100% Magnaflux tested and are supplied with a model number, wire rope size, working load limit and usage warnings.

The container eye link is intended to be used in the corner eyes of shipping containers as an attachment point for rigging to assist in up righting overturned containers. By using a shoulder bot, nut and pin, it becomes a terminal connections. This link is a must for any situation involving an overturned shipping container! The working load limit is 35,300 lbs with a 4:1 safety factor.

Variety of sizes of shackles make it easy to have the right size when you need it.

Cradle grab hooks from Zip's are made from Grade 100 high-strength alloy steel and are approved for overhead lifting. A clevis pin allows for attachment to chain, and the size and grade are stamped on the side of the hook. See the drop-down menu for available sizes and working load limits.

These Grade 100 Chain Assemblies are 2' long with an oblong link attached at one end and a foundry hook on the other end. Grade 100 chain is made from alloy steel and is extremely strong, 25% higher work load limit than grade 80, making it ideal for recovery or lifting.

Grade 100 Chain is produced from special alloy steel and has a gray protective coating. Grade 100 chains have a 25% higher work load limit compared to Grade 80. Chain meets or exceeds NACM, ASTM and OSHA specifications. Grade 100 is approved for overhead lifting.

Grade 100 oblong links from Zip's can be used to create chain assemblies. See the drop-down menu for available sizes and working load limits.

Container Slings from RimSling can be used in a variety of ways to move, load and organize shipping containers around a dock, in a storage facility or between customers. The sling's flexible, narrow profile can slip through the container's corner pocket, and the 6" spliced eyes can be brought back together for a basket lift of up to 37,040 lbs. A special rubberized guard is also available to slide to the lift point to prevent unnecessary wear and stress to the sling.

These grade 80 chain assemblies come equipped with a Cradle Grab Hook connected on each end. Some standard uses for this assembly are chain to chain hooking, equipment safety, tie-down, over-the-road safety and vehicle stabilization.

Grade 100 bulk chain from Zip's is sold by the foot and available in six sizes. The chain is made from alloy steel and protected by a special gray coating. The chain meets or exceeds NACM, ASTM and OSHA specifications and is approved for overhead lifting. See the drop-down menu for available sizes and working load limits.

These are a synthetic soft shackle made by the makers of RimSling. These soft shackles are the perfect replacement in place of traditional metal shackles. These soft shackles don't need any tools and is easy to open and close. They are light and their soft properties will not damage paint. These shackles do not corrode or rust making them outlast any metal shackles. These soft shackles have many different applications on the rigging and recovery scene. Any place you can use a metal shackle you will be able to use this soft shackle just as efficiently. These Soft Shackles are available in 5/16", 3/8", 7/16", 1/2", 5/8", 3/4", 7/8", 1", 1-1/8" and 1-1/4".

Grade 80 coupling links from Zip's are the preferred choice to attach hooks to chain. See the drop-down menu for available sizes and working load limits.

Corner protectors are a must for all straps that contact loads. A seemingly dull edge can become a knife when the strap is put in tension. This part can be used to replace Part Numbers: 270412, 270SLEEVE, 38-CP4.

Grade 100 Coupling Links are the best way to attach hooks and other accessories to your chain. Grade 100 links are made from high strength alloy steel and have a 25% higher work load limit than standard grade 80 links, making them perfect for towing or lifting applications.

Use this aluminum Tailboard Transformer to install a snatch block into the tie down slot of your carrier bed. Drop it into any hold in your carrier bed and use it to change the direction of your pull. The Tailboard Transformer is best used for performing recovery operations such as one lane parallel uprighting. Designed as a terminator and as a retainer pin.

Note: Special Handling Fees Apply for Specific Items

Screw pin anchor shackles from Zip's are made from forged alloy steel and feature an open throat design that requires no tools to operate. The shackles are available in seven sizes and are stamped with the size and capacity. See the drop-down menu for available sizes and working load limits.

These Twist Lock Shackles have a quick locking and unlocking action which means less time in the "danger zone". The pin will fully retract without coming loose because it is permanently attached to the shackle.

Bolt Style Shackles offer the safest way to connect a web shackle to a recovery strap. By adding the nut and bolt feature it now provides added peace of mind when using the web shackles for normal recovery or accidental side loads.

Grade 80 grab hooks from Zip's include the clevis and cotter pint to attach to your chain. The size and grade are stamped on the hook. See the drop-down menu for available sizes and working load limits.

Zip's high-quality, low-cost snatch blocks are available in three rope sizes with working load limits up to 16,000 lbs. These blocks also feature a swivel shackle that increases its versatility at the recovery scene. See the drop-down menu for available sizes and working load limits.

Maximize the recovery capabilities of your car carrier rollback, light duty wrecker, or medium duty tow truck with the In the Ditch SP9000 Sidepuller. This is a SP9000 Sidepuller that is designed for those who want a more customized installation. Zip's provides you with the sidepuller, from In the Ditch, with everything except the valve body and hydraulic hoses. This gives you the option of providing your own custom hydraulic controls. Typically this application is for those who order their carrier or wrecker with factory installed sidepuller controls. When you order this SP9000 sidepuller it will come with the following: Center Recovery Boom Head, Outer Removable Recovery Boom Head, Light Bar Mounting Base, 9,000 lb Winch with Tensioner Plate, Winch Free Spool with Easy Reach Handle, 3/8" x 100' Wire Rope, Adjustable SP Mounting Base, Installation Hardware, Painted Tuff Coat Gloss Black Finish, Polished Stainless Steel Rear Panel, Decal Package, Operation Manual (also available online), and it will come on a shipping stand. To view a specifications sheet and operations manual, click on the brochure tab. Click on the video tab to see more about this amazing product.

Zip's Snatch Block Storage Bracket. Designed specifically for the snatch blocks to be stored by the hook. The bracket can typically store up to 4 blocks at a time. 17.5" Long. Heavy Duty Aluminum Construction. Bolt-on installation.

Please Note: Product Discontinued - ALL SALES FINAL!

These Grade 100 Chain Assemblies come with a Cradle Grab Hook attached to each end of each chain. Cradle Grab Hooks are far more superior than standard grab hooks. Grade 100 chain is made from alloy steel and is extremely strong, 25% higher work load limit than grade 80, making it ideal for recovery or lifting. These Chain Assemblies are come in Hi-Vis Yellow to help keep your recovery scene safe.

Zips Flat Strap Eye Slings have a Sewn Eye Loop at each end of the strap and built with 2 ply construction. These recovery straps are used for lifting and recovery on scenes of accidents. They have multiple rigging options which include vertical rigging, choker rigging, and basket rigging.

This pylon is designed to fit all SP series sidepullers. It is made from steel and comes standard with stainless steel mounting hardware. It features laser cut holes for mounting work lights and is painted in a tuff coat gloss black finish. This pylon will need to have the In the Ditch light pylon mounting base installed on the sidepuller in order to mount this pylon.

Sling hooks from Zip?s are made from Grade 100 alloy steel and are approved for overhead lifting. A clevis pin allows for attachment to chain, and the size and grade are stamped on the side of the hook. A spring latch provides a secure connection. See the drop-down menu for available sizes and working load limits.

B/A's recovery straps are the premier straps in the industry. Made from single ply webbing, they offer the best in strength, yet this soft pliable webbing conforms and supports the load - making your recovery job easier. All straps are made with heavy duty polyester and have lined eyes for superior wear protection.

Please Note: Product Discontinued - ALL SALES FINAL!