Ramps

Note: Special Handling Fees Apply for Specific Items

Tow like a pro with the 74-inch long Single Piece HD Tow Ramp! You know that your customer loves his or her Corvette, Porsche, or other low-to-the-ground car, and you need to show them that it's safe in your hands too. The 1 inch by 5 inch notch in this Tow Ramp enables you to simply fold the rollback down into the notches and drive on up (or hook up the winch) with no worries about your safety or the safety of the car. This ramp gives 7 inches of lift and has a 5.2-degree angle of approach. It is designed for tires up to 8 inches wide. It can support up to 2,500 pounds for a total vehicle weight capacity of 10,000 pounds.

These ramps are constructed using an exclusive, patent process. They are 100% solid, high-density foam with a rugged anti-slip coating that results in a lightweight ramp solution that is strong yet durable. The ramp will not slide, scratch, or otherwise damage any floor type. The reinforced bottom allows the ramp to be used on gravel or other rough surfaces that you may encounter along the side of the road.

Please ensure that your ramp is damage-free before use. Never use two ramps on the same side of the vehicle. Use on a flat, level surface and ensure that the ramp makes full contact with the ground. Check that your steering wheel is straight and drive up at a slow, steady pace.

• Tow Truck Flatbed Extension Ramps
• Sold as a pair
• Available in a single piece or in 2 pieces
• Dimensions: 74"L x 10"W x 7"H
• Lightweight - only 13.5 lbs
• Each ramp supports 2,500 lbs. Total vehicle capacity per pair: 10,000 lbs
• Highly durable, virtually indestructible, and very stable
• Easy to use, store and transport
• Unscootable! Won't slip or slide, no matter the surface
• Safer than using boards
• Provide a professional appearance when transporting exotic cars
• Load Corvettes, Porsches and other low profile cars without doing damage

ITI Starter Ramp is made for Steel Beds or Aluminum Beds and bridges the gap between the tail of a flatbed car carrier or trailer ramp and the ground surface, creating an easy transition between uneven surfaces. This starter ramp is designed with a 90 degree notch for the tail to sit in place. The low load angle the ramp provides prevents unnecessary damage to high-end vehicles or equipment with low clearance issues.

Note: Special Handling Fees Apply for Specific Items

These Trailer Ramps are helpful for low ground clearance cars with extra wide tires when loading and unloading vehicles from trailers. They prevent damaging the front of the vehicle by decreasing your angle of approach by 5.5 degrees. These ramps vary in size making it easy to find the right one that will work perfectly with your trailer. These ramps are lightweight, very stable, and are virtually indestructible.

These trailer ramps are manufactured using an exclusive, patented process. They are constructed of 100% solid, high-density foam with a rugged anti-slip coating that results in a lightweight ramp solution that is strong, yet durable. They won t slide on any surface, including ice, making them a versatile choice in any weather condition.

Please ensure that your ramp is damage-free before use. Never use two ramps on the same side of the vehicle. Use on a flat, level surface and ensure that the ramp makes full contact with the ground. Check that your steering wheel is straight and drive up at a slow, steady pace.

The ramps will not slide, scratch, or otherwise damage any floor type and can hold up to 1,500 lbs. per ramp for a total vehicle weight capacity of 6,000 lbs. Each ramp is designed for 1500lbs per tire at one point on the ramp. You do not want to exceed 6,000lbs gross weight when using these.

• Race Ramp Trailer Ramps
• Set of 2
• Lengths: 45" - 131"
• Widths: 14" - 16"
• Heights: 4" - 11"
• 100% Solid core
• Supports a vehicle u to 1,500 lbs. per ramp for a total vehicle weight capacity of 6,000 lbs
• RR-TR-11-2 is 2 pieces

This set of two XTenders can only be used with 7-inch lift HD Tow Ramps to further lower the angle of approach. Simply place the XTenders on top of the Tow Ramps and drive on up! The XTenders can also be inverted for use as a "œhumper" ramp to get a bit of additional lift when needed. They are 10 inches wide and 35 inches long, weighing 6 pounds each.

Trak-Jax ramps were inspired by an auto-crosser who didn't want to buy a new high-priced, low-profile jack just to change his tires at the track. These ramps lift your car 3 inches so that you can fit a standard floor jack underneath. They're small and lightweight at only 5 pounds per ramp, so you can easily toss them in the trunk of your sports car for your day at the track. They can accommodate tires up to 10 inches wide, and support up to 1,500 pounds per ramp.

Our Racer Mat is a plush, durable, folding mat designed to keep you comfortable and clean while working on your vehicle. Made out of polypropylene fiber, the Racer Mat is oil and chemical resistant and does not retain water - meaning it won't grow mold or mildew and is easy to clean. Measuring 6 feet long by 2 feet wide with 1 inch of padding, it is big enough to lie on. For transport and storage, it can be folded in half, and has cut-out handles for better handling. Protect your back, knees, and maybe even your clothes any time you're on the ground!

Use a set of our 7-inch or 9-inch high trailer ramps to avoid scraping or removing the front bumper of your race car, sports car, lowered car or other low profile vehicle as you load it into your trailer for your next track day, car show, or multi-state trip. Our trailer ramps come with a built-in notch cut-out and are tailored to fit specific trailer measurements, so be sure to use our trailer ramp calculator before you start to browse! To use them with your trailer, simply lower your trailer door down into the 5-inch long by 1.5-inch high notch and drive your car up and into your trailer - it s that easy!

These 14" Xtender Ramp extensions are designed to work with our 67-inch Race Ramps, and they reduce the angle of approach to 6.6 degrees for low profile cars. These 12" Xtender Ramp extensions are designed to work with our 56-inch Race Ramps, and they reduce the angle of approach to 6.6 degrees for low profile cars.They are a handy resource for garages and auto shops that work with multiple makes and models, or for the home enthusiast who might just need a slightly gentler incline to accommodate a new car, or a modded car with a lip or splitter. The 14" can accommodate tires up to 12 inches and only weigh 10 pounds apiece. The 12" can accommodate tires up to 10 inches, and only weigh 10 pounds apiece. Once your car is parked at the top of your ramps, the extensions can be removed for additional work space - just remember to put them back before you drive down!

Put safety first with this 12-inch Racer Chock. It has texture across the entire width for the ultimate grip on your tire, ensuring that both the chock and the tire will not move. At only 2 pounds, it is light enough to easily move and reposition, and it can hold up to 1,500 pounds.

Avoid the struggle of dragging heavy steel ramps into position to help your front end clear your lift or platform! Instead, reach for a lightweight set of our 27.5-inch long hook-nose Rack Ramps or our 40-inch long hook-nose Rack Ramps. They have an 8.6-degree approach angle and come with a 3-inch cutout/lip bridge. The 14-inch width works with tires up to 12 inches wide. Each rack ramp can support up to 1,500 pounds for a total vehicle weight capacity of 6,000 pounds. The 4" H provide 4 inches of lift height. The 5" H provide 6 inches of lift height, which flattens out to 5 inches high along the lip bridge.

Avoid the struggle of dragging heavy steel ramps into position to help your front end clear your lift or platform! Instead, reach for a lightweight set of our 36-inch or 48-inch long hook-nose Rack Ramps. The 36" have a 8-degree approach angle and the 48" has a a 6.4-degree approach angle and come with a 3-inch hook. The 14-inch width works with tires up to 12 inches wide. Each rack ramp can support up to 1,500 pounds for a total vehicle weight capacity of 6,000 pounds. They provide 5 inches of lift height.

The next time you reach for your racing scales, hold back on the jack and instead reach for this set of four or set of two Scale Ramps. They will save you time setting up, and provide 2.5 inches of height to get your car ready for positioning on your racing scales. Each scale ramp can support up to 1,500 pounds for a total vehicle weight capacity of 6,000 pounds. The 8.7-degree approach angle allows low-profile cars to easily mount onto your scales. They are ideal for track days, auto shops or personal garages as they can be moved and transported with ease.

It's time to scrap the boards and makeshift ramp set-ups! A pair of Multi-Purpose Shop Ramps are a worthwhile investment for any garage. They became part of our Race Ramps family after multiple requests for similar ramps, and we engineered them to suit several common auto shop scenarios. You can use these ramps as a trailer ramp, alignment ramp extender, a 4-post lift ramp extender, a 2-post lift ramp, a jack-assist ramp, or anything else you can think of.

Safer than jack stands and far more attractive, our multi-purpose Wheel Cribs are a stable, sleek alternative that offer greater maneuverability and versatility. Whether being used for fluid changes, general maintenance, detailing, or lifting up your vehicle at a show, these wheel cribs will truly be the talk of the town. Sold in pairs, each crib can hold up to 1,500 pounds for a total vehicle weight capacity of 6,000 pounds, and they support tire diameters 24 to 30 inches. They are also incredibly lightweight at 5-7 pounds per crib - perfect for taking with you to shows or moving around your shop. For a particularly sharp show display, use them in conjunction a show mirror.

Designed to be used with our 56- or 67-inch XT Race Ramps, this pair of Roll-Ups Ramps provide that extra bit of boost to give low profile cars extra clearance for maintenance. Roll-Ups are perfect for raising up the front or rear of your car up 4 inches, which is enough to slide in most standard floor jacks. At 14 inches, they can be used with tires up to 12 inches wide, and each ramp can support by to 1,500 pounds for a total vehicle weight capacity of 6,000 pounds. These ramps only weigh 4 pounds apiece, making them light and small enough to fit in the trunk of your C5 or C6 Corvette, or bring along to track day.

Easily maintain, service or display your sports car with our set of two 30-inch Rally Ramps. We engineered these ramps to work with most small sports cars including stock Miatas, Subarus, Evos, BMWs and Triumph MGs. This set of two ramps fits tires up to 8 inches wide, and provides a full 5 inches of lift. They have a 16-degree angle of approach and can hold up to 1,500 pounds each for a total vehicle weight capacity of 6,000 pounds, yet each ramp only weighs 4 pounds. The raised lip alerts the driver that they've reached the top of the ramps, and they come carrying straps for easy positioning.

The Trailer Side Kick is helpful both for parking your vehicle inside your trailer and for changing a trailer tire. For parking inside a trailer, the Side Kick fits in front of a trailer's wheel wells to provide a tapered, protective guide between your vehicle's wheels and the trailer's steel wheel wells. For changing a trailer tire, simply drive the good tire onto the ramp and the flat tire will be lifted off of the ground for easy removal and replacement. The Side Kick can be used on any level surface without sinking, even grass, or even sand.

Safer than jack stands and far more attractive, our multi-purpose Wheel Cribs are a stable, sleek alternative that offer greater maneuverability and versatility. Whether being used for fluid changes, general maintenance, detailing, or lifting up your vehicle at a show, these wheel cribs will truly be the talk of the town. Sold in pairs, each crib can hold up to 1,500 pounds for a total vehicle weight capacity of 6,000 pounds, and they support tire diameters 24 to 30 inches. They are also incredibly lightweight at 5-7 pounds per crib - perfect for taking with you to shows or moving around your shop.

Show Ramps are a quick, easy way to improve your vehicle display at a show. These double incline ramps can be used to raise up the front, back, or side of the car; or get two sets and raise up the entire body! They are a great lightweight alternative to jack stands, floor jacks, and wooden blocks. Paired with an accessory like a show mirror, they make for an impressive display that is easy to set up and transport.

Easily maintain, service or display your sports car with our 40-inch Sport Ramps. We engineered these ramps to work with lowered and short-nose vehicles such as stock Miatas, Subarus, Evos, BMWs, Triumphs MGs, Jaguars, C1-C3 Corvettes and more. This set of two ramps fits tires up to 8 inches wide, and provides a full 7 inches of lift. They have a 16.7-degree angle of approach and can hold up to 1,500 pounds each for a total vehicle weight capacity of 6,000 pounds, yet each ramp only weighs 6 pounds. The raised lip alerts the driver that they ve reached the top of the ramps

Perfect for use with trailers, as well as around a garage or workshop, this sturdy lightweight Trailer Steps will give you just the lift you need. In addition to being a helpful step up outside or inside trailers, it can also be used for an extra boost while washing and detailing, or as a handy bench while you service your car on our Race Ramps or wheel cribs.

You're pulling your collector's car out of storage for the first time this year and see flat spots on your tires once again. You sigh, knowing that you can expect a bumpy ride for a while or that you'll have to replace them if those spots won't go away. Don't let that happen again! FlatStoppers have been saving thousands of tires worldwide while they're stuck in winter or long-term storage and they are more affordable than the cost of replacing your tires. When you're parking your car for 30 days or more, simply drive onto our best-selling 28-inch long FlatStoppers and your tires will settle into the concave depression of the pads to evenly disperse the weight of the car across the increased contact patch and prevent flat spots.

Great for wrapping or general maintenance work, Portable Pit Stop Ramps elevate vehicles for safer underbody access and more comfortable body height. They're light enough to bring with you to the track, keep on hand in your personal garage, or simply leave out in your workshop for everyday use. The multi-piece design is easy to assemble with pieces that weigh no more than 40 pounds; and once a car is positioned on top, the center pieces and inclines can be removed for even better accessibility under the car and around the perimeter.

Trailer Mates eliminate the hassle and stress of getting your low profile, track car or sportscar safely tied down in your trailer without scraping the front bumper. Trailer Mates add 3 inches of ground clearance so that you have more room to reach your vehicle's tie-down points, and in some cases, open the door over the trailer wheel well.

Make your car stand tall at your next event with Race Ramps Show Cribs. Once the car has been safely jacked up and lowered into the show cribs, they will safely cradle the tires for an elevated view of your vehicle. The pyramid design is tapered on all four side for increased stability and stylish design, which also provides an unobstructed view underneath the car and adds a dramatic flair to your vehicle display.

Designed to work with low profile and lowered cars, 56-inch Race Ramps provide 8 inches of lift for better access to the underbody of your vehicle. These tough ramps are sold in pairs and can support up to 1,500 pounds each for a total vehicle weight capacity of 6,000 pounds. The two-piece design gives you the option to remove the ramp once your car is stabilized on the top portion for better side access during service or display in showrooms or at shows. Each ramp also comes with a carrying strap for easy transport and storage.

Aluminum Jump Ramp allow the vehicle to get from the trailer to the tractor. These ramps have a reverse knife point end.

Designed to work with low profile and lowered cars, 67-inch XT Race Ramps provide 10 inches of lift for better access to the underbody of your vehicle for service and maintenance. These tough ramps are sold in pairs and can support up to 1,500 pounds each for a total vehicle weight capacity of 6,000 pounds. Their 14-inch width is designed to comfortably accommodate tires up to 12 inches wide. The raised lip at the top of the ramp provides a gentle stop that reduces the need for a spotter, although we always recommend having one present. Positioning them or moving them for storage is easy, since each ramp only weighs 17 pounds and comes with a carrying strap.

Keep your vehicle elevated for service and maintenance with the lightweight and tough Race Ramps Slip Plate Stands. Lightweight construction makes them easy to transport and maneuver into position for use with most industry slip plates, grease plates, and turntables.

Our set of two-piece 80-inch Combo Ramps are the "triple header" of ramps! Use them as service ramps in the garage, trailer ramps when loading, or remove the ramp portion and use them as wheel cribs for display or service. They have an 8.5-degree angle of approach and can hold up to 1,500 pounds each for a total vehicle weight capacity of 6,000 pounds yet each ramp only weighs 22 pounds.

Note: Special Handling Fees Apply for Specific Items

Aluminum Open-End style ramps offer a reliable hook designed to fit up to a 1-1/4" round bar or angle steel. There must be a rail for these ramps to connect to. These ramps have a stub toe end.

• Lbs. per Axle: 4,000 lbs. - 5,000 lbs.
• Sold as Each
  
  Available in the following sizes
  
  

  Item #	Size
  BA-R-M15094-O5	15" x 94"
  BA-R-M15094-O5T	15" x 94" Thin
  BA-R-M18096-05	18" x 96"

There s nothing as frustrating as trying to work on a car only to realize that it won't fit on your shop or home lift! Luckily, these 4-inch Car Lift Ramps make it easier than ever to get that low vehicle up on a scissor or 2-post lift. They come as a pair; each ramp weighs about 40 pounds total and is compromised of four interlocking pieces. Each side can hold up to 3,000 pounds for a total vehicle weight capacity of 6,000 pounds.