0 Item(s)
You have no items in your shopping cart.
Truck Fenders and Mounts
Our stainless steel and plastic fenders made by Phoenix USA, Minimizer and In the Ditch will keep your trailers, trucks and vehicles looking good while keeping the dirt and dust on the road. These fenders are made for wide wheels and quarter fenders. Zip’s carries full fender sets, bracket kits, fender sets, replacement fenders and more!
Showing 80 items
- Price
-
-
-
-
-
-
- Brand
-
-
-
-
-
-
-
-
-
Your Filters
Clear All
Filter
Sort by
Loading...
Loading...
Buyers Wheels up to 24-1/2" Ribbed Poly Rear Half Fender Set W/ Mounting Kit
Buyers Products Ribbed Poly Fender is a durable and lightweight fender for
trucks with wheels up to 24-1/2". Constructed from molded polyethylene, the
half fender will not rust or dent and can handle wear and tear from daily use.
Its molded ribs add strength and reduce spray from the road. This fender
protects your tires without adding a lot of additional weight. Kit includes
both rear fenders and mounting hardware.
$474.99
Phoenix 21" Quarter Fender Half Set/Full Set For 19.5x6.75 or 7.5 W Wheels
This 21" wide quarter fender will fit trucks with 19.5" x 6.75" & 7.5"
wide wheels. These stainless steel fender mount over
single or dual wheel tires to keep sand, salt, mud, and road debris from
flying forward and making a mess of the underside of your truck. They work
well on car carries, keeping tool boxes and hydraulic controls clean and in
good condition. Quarter fenders cover the front quarter of your
tires. Include mounting
hardware and complete instructions for simple installation.
$201.99
–
$352.99
Phoenix Half Fenders, 21" Pair
These stainless steel fenders mount over single or dual wheel rear tires to
keep sand, salt, mud and road debris from making a mess of the underside of
your truck. Quarter Fenders cover the front quarter of your tires while Half
Fenders cover the top half of your tires. Include mounting hardware and
complete instructions for simple installation.
$863.99
Phoenix 24" Quarter Fenders
These stainless steel fenders mount over single or dual wheel rear tires to
keep sand, salt, mud and road debris from making a mess of the underside of
your truck. Quarter Fenders cover the front quarter of your tires while Half
Fenders cover the top half of your tires. Include mounting hardware and
complete instructions for simple installation. These 24" wide quarter
fenders that fit trucks with 22.5" wheels. They work well on car carries,
keeping tool boxes and
hydraulic controls clean and in good condition.
$341.99
–
$415.99
Buyers 20" Smooth Poly Half Fender and Mounting Kit
This kit includes the fenders, hanger brackets, bolts and fasteners you need
to replace and the rear fenders for trucks with 19-1/2" or smaller dual rear wheels.
$486.99
Buyers Black Fender Mount Pair
Buyers Products Fender Hanger Bracket works with fender mounting arms to attach
fenders to your vehicle. Sold as Pair.
Product Common Use: Dump Trucks, Garbage Trucks, Work Trucks, Utility Trucks
$38.89
Buyers Poly Fender Mounting Kit
Buyers Products Poly Fender Mounting Kit includes all hardware to mount
polyethylene fenders to your vehicle. The heavy-wall, structural steel tubing
is available with either a black powder-coated or stainless steel finish and is
sized to mount all dual rear wheel applications. It has a 5 in. offset that
clears spring shackles and adjusts mounting height. The kit includes (2) fender
mounting arms, (4) plastic end caps, (2) frame bolts, and (4) adjustable poly
fender hanger brackets with fasteners. Compatible with all Buyers Products poly
fenders.
$140.99
Minimizer Plastic Bolt On Bracket Kit
Minimizer offers the best fender bracket systems in the industry. The B100BTPA
- Plastic Bolt On Bracket Kit offers a bracket that won t stay bent; won t
stress crack; never needs paint; softens road vibration; and is made from 100%
composite material.
$379.99
Buyers 24-1/2" Ribbed Poly Half Fender Only
Buyers Products Ribbed Poly Fender is a durable and lightweight fender for
trucks with wheels up to 24-1/2". Constructed from molded polyethylene, the
half fender will not rust or dent and can handle wear and tear from daily use.
Its molded ribs add strength and reduce spray from the road. This fender
protects your tires without adding a lot of additional weight.
$89.99
Miller Mud Flap Right Hand Mounting Bracket
This Right Hand Mud Flap Mounting Bracket from Miller Industries is used on the assembly of several Miller Car Carriers. These include Century, Champion, and Vulcan Carriers. Please see the features below for a list of carriers, and see the brochure tab for breakdowns. This part can be used to replace Part Number 12-0704950.
$102.99
Phoneix 2"W Rubber Fender Guards (Sold per Foot)
Protect your fenders from mess and damaging road debris. Can be painted or left black. Sold per foot.
$12.29
BUYERS PRODUCTS 20" Smooth Poly Half Fender Only
Product Available 05/2021
This durable and forgiving lightweight fender, made from injection molded polyethylene construction, wont rust, dent or corrode from daily use. Fits 19-? or larger dual rear wheels.
Mounting Kit (PFMK) - sold seperately
- Smooth fender dimensions: 48"L x 20"H x 22-1/2"D x 3-1/2" thick
Suggested Products
$84.99
Phoenix 21" Quarter Fender Half Set/Full Set For 16 and 19.5x6 W Wheels
These are Phoenix 21" Wide quarter fenders that fit trucks with 16"-19" x 6"
wide wheels. These stainless steel fenders mount over single or dual wheel
tires to keep sand, salt, mud, and road debris from flying forward and making
a mess of the underside of your truck. They work well on car carries, keeping
tool boxes and hydraulic controls clean and in good condition.
$201.99
–
$352.99
Trux Poly Half Fender
These 66" Poly Half Fenders with rolled edges are designed to withstand the
nastiest of conditions. The fenders are high quality polyethylene which has
been tested & proven to resist chemical spills & UV rays.
$350.99
Phoenix Quarter Fenders Replacement Mounting Tube
Phoenix Replacement Mounting Tube for 21" and 24" Quarter Fenders (QF21 and
HF23).
$84.99
Miller Mud Flap Left Hand Mounting Bracket
This Left Hand Mud Flap Mounting Bracket from Miller Industries is used on the
assembly of several Miller Car Carriers. These include Century, Champion, and
Vulcan Carriers. Please see the features below for a list of carriers, and see
the brochure tab for breakdowns.
$102.99
Mudflap Anti Sail Bracket 24"x18"
This is an anti-sail mud flap bracket. This helps keep the mud flaps secure
and keeps wear and tear down. Product is made from stainless steel.
$32.99
Trux Poly Quarter Fender Kit w/ Rolled Edge
These 24in Poly Half Fenders with rolled edges are designed to withstand the
nastiest of conditions. The fenders are high quality polyethylene which has
been tested & proven to resist chemical spills & UV rays.
$114.99
Minimizer Fast Flap Brackets
Minimizer Fast Flap secure mud flaps without creating any holes in the flap or
sacrificing strength. It takes more than 500 pounds of pressure to detach a
mud flap from the Fast Flaps stainless steel bar, and the result doesn t
damage the flap.
$182.99
Zip's Mudflap Bracket, Pair
These are mudflap brackets for wreckers. These brackets attach your mudflap to
the body of the wrecker. Sold as Pairs.
$49.09
Fenders, 22.5" Black Plastic
These are Spry Master injection molded polypropylene full fenders. These are
more durable and forgiving than aluminum fenders plus they won't corrode. Sold
as pairs.
$415.99
Miller Century 2465 and Vulcan V-24 Fenderette Kit
This Fenderette Kit from Miller Industries will provide a clean and custom
appearance on the Century 2465 and Vulcan V-24 chassis. This kit is designed
specifically for these units. The Fenderette Kit includes two fenderettes and
mounting hardware. Each fenderette is about 2.5" wide, can be painted to match
the body and it easily attaches with screws into the body wheel lip.
$491.99
Trux Standard Half Fender Kit
The TRX-SPC8 is a 60" or 66" stainless steel half fender kit, including mounting
hardware. It is designed to fit 43.5 or 46.5" O.D tires.
$791.99
–
$821.99
Miller Light Duty Wrecker Mud Flap Back Up Strip
This mud flap back up strip from Miller Industries is used on light duty
wreckers.
$34.49
Tramec Sloan Black 19.5" Plastic Fenders
This is a replacement set of 19.5 inch black plastic fenders. This is the the
fenders only, the mounting brackets are sold separately.
$367.99
Minimizer 24.5 Black Fender
This one Minimizer fenders for a single axle
tractor or trailer with dual 24.5 wheels.
$312.99
Minimizer 22.5"-24.5" Black Half Fenders
The MIN900 Poly Fender is manufactured using a proprietary material and
thermoformed using proprietary technology. Designed to fit a 52"-54" tandem
axle spread with 22.5" - 24.5" dual tire. Designed with a unique outer lip,
Minimizer fenders provide superior control of spray and debris off the tires.
That means clean, damage-free freight and a safer environment for you and other
drivers on the road. When dented or crushed they bounce back into shape. The
material is extremely durable, impervious to salt and corrosion, and can
withstand temperatures ranging from -100? F to 197? F.
$271.39
Trux Accessories Triangular Fender Mounting Arms Kit
This is a Triangular Mounting Arms made for half fender. These mounting arms
are painted black steel.
$349.99
Stainless Steel Mud Flap Weights, 18"W, Pair
class="s1"These quality Mud Flap Weights are easy to install, look great on your truck and help to keep your mud flaps hanging straight. They are made from polished stainless steel. Sold in pairs.
$47.55
Minimizer 19.5" Black Plastic Fender (Only)
These black plastic fenders from Minimizer are designed to fit a single axle
tractor or trailer with 17.5 through 19.5" wheels. These fender kits are very
lightweight, yet durable. The total weight of this fender kit is less than 14
lbs. Use B100BTPA mounting brackets to mount fenders to truck.
$192.99
Trux Accessories Standard Half Fender Mounting Kit
Trux Accessories stainless steel half fender mounting kit with triangular
undermounts. The following items are included in this kit: (2) triangular
mounting brackets, (2) triangular fender arms(14 ga), (2) threaded post mount tubes,
(2) clamps.
$315.99
Minimizer 22.5" Black Plastic Fender
These black Fenders from Minimizer are manufactured using a high density
polyethylene material and thermoformed using proprietary technology. It is
designed with a unique lip that provides superior control of spray and debris
so your loads and equipment are safer and cleaner. These fenders also have the
ability to bounce back into place after being dented because the material is
extremely durable, impervious to salt and corrosion, and can withstand
temperatures ranging from -100?F to 197?F. This model of fender has a built in
light box molded into the rear of the fender.
$430.99
Phoenix Replacement Rubber Shim
Phoenix replacement rubber shim used in the QF24 quarter fenders.
$16.29
Miller Mud Flap Bracket
This Mud Flap Bracket from Miller Industries is used on the Control Station Components Assembly of Century LCG 12 and 16 Series Car Carriers. Please see the brochure tab for breakdowns. This part can be used to replace Part Number 12-0704771.
$46.99
Phoenix Jerr-Dan Right Rear Fender Flare w/ 4" Extra Wide Lip
Phoenix Right Rear Jerr Dan Fender Flare with 4" Extra Wide Lip.
$160.99
Minimizer 19.5" Red Plastic Fender (Fender Only)
These red plastic fenders from Minimizer are designed to fit a single axle
tractor or trailer with 19.5" wheels. These fender kits are very lightweight,
yet durable. The total weight of this fender kit is less than 14 lbs. Use
B100BTPA mounting brackets to mount fenders to truck.
$207.49
Plastic Minimizer Fenders Bracket Kit
Plastic style mounting brackets for 19.5" & 22.5" Minimizer plastic fenders.
They are a bolt-on design and come black in color. This kit covers the driver
and passenger side of the truck.
$537.99
Premium Quick Pick Set Offset Mount
Fleet Engineers post style round end mount 031-02000 for FR-22 fenders. Flush mount design results in more bearing surface.
$164.99
Phoenix Stainless Steel 1/4" Fender (Fenders Only)
These are Phoenix stainless steel quarter fender for 21" or 24". These are the
fenders only, mounting brackets and hardware are sold separately.
$152.99
–
$240.99
Trux Economy Stainless Steel Quarter Fender Kit w/ Rolled Edge
These 24" Economy Fleet Quarter Fenders are tough stainless steel construction
featuring a welded and polished end cap to keep moisture and grime out. This
pair of fenders is not only good looking, but it is also affordable and
functional made from 18-gauge stainless steel.
$214.99
Phoenix Replacement Fender (Fender Only)
Phoenix 21" Fender for HF23. HF23 is a Half-Fender Set That Fits Trucks with
19.5" Wheels. This is the fender only, mounting brackets are not included.
$284.99
Tramec Fenders 22.5" Red Plastic
These are Spry Master injection molded polypropylene full fenders. These are
more durable and forgiving than aluminum fenders plus they won't corrode. Sold
as pairs.
$457.99
Minimizer Fenders 22.5 or 24.5 Dual Tires as a Half Fender
This is a half fender designed to fit a tandem axle tractor or trailer as a
half fender. These fenders are designed for 22.5 or 24.5 dual tires as a
half fender.
$513.99
Miller Large Wrecker Stainless Steel Fenderettes
This stainless steel trim from Miller Industries is for use on large
wrecker fenderettes.
$485.99
Phoenix 19.5" Truck Wheel Half Fender 21" (Single)
Phoenix 21" Half Fender for Trucks with 19-1/2" x 6.75" and 19-1/2" x 7.5"
Wheels. This Stainless Steel Fender Mounts Over Single or Dual Wheel Rear
Tires to Keep Sand, Salt, Mud, and Road Debris From Flying Forward and Making a
Mess of the Underside of Your Truck.
$492.99
Minimizer 24.5 Black Fender W/Light Box
This Minimizer fender with light boxs for a single axle tractor
or trailer with dual 24.5 wheels.
$690.99
Fleet Bolt-On Offset Mount Bracket Kit
Tramec Sloan Fleet Engineers product is a replacement bolt-on offset mount
bracket kit. This kit come with 4 brackets and all of the mount hardware.
$260.99
Trux Accessories Swivel Undermounts Kit (Tube Fender Mounting Arms)
This is a Swivel Undermount Tube Mounting Arm kit made for half fender. These mounting arms
are painted black steel.
$198.99
Trux Accessories Angeled Fender Bracket Kit (Tube Mounts)
This is a Angled Fender Tube Mounting kit made for half fender. These mounting arms
are painted black steel.
$145.99
Century Midnight Express 300 and 812 Series Wrecker Mud Flap Bracket
This mud flap bracket is for the Century Midnight Express 300 & 812 Series
Wrecker.
$26.49
Phoenix Quarter Fenders Replacement Mounting Tube Only (PQF24ST)
Phoenix Replacement Mounting Tube for 24" Quarter Fenders (QF24).
$64.99
Buyers Fender Flap Extention
$11.29
Buyers Quarter Poly Fenders for Dual Rear Wheels
Buyers Products Quarter Poly Fenders for Dual Rear Wheels have an integrated 5.5" top poly flap extension for added protection. The fenders are constructed from 100% polypropylene and will not rust or corrode. The fenders are durable, lightweight, and forgiving. They take a beating so the rest of your truck doesn't have to.
$52.99
–
$83.99
Filter
1 - 60 of 80 items
Durable Truck Fenders and Mounting Solutions
For any commercial truck or heavy-duty vehicle, truck fenders and mounts play a critical role in protecting your vehicle, cargo, and bystanders from road debris. Whether you’re upgrading worn fenders or adding a practical storage solution, the right fender system ensures long-lasting performance, durability, and a clean, professional look.
Why Choose Truck Fenders and Mounts
Selecting the right truck fender isn’t just about style; it’s about safety, functionality, and durability. Fenders prevent mud, water, gravel, and other road debris from hitting your vehicle or other drivers. Mounts and mounting kits make installation secure and reliable, minimizing vibrations or shifting while driving.
Key benefits include:
- Protection: Shield your truck body and cargo from flying debris and harsh weather conditions.
- Material Options: Poly, aluminum, and stainless steel fenders provide a balance between strength, weight, and corrosion resistance.
- Custom Fit: Half and quarter fender designs accommodate a variety of truck makes, models, and wheel sizes.
- Storage Solutions: Some fenders include built-in storage compartments to maximize utility on the road.
- Secure Mounting: Many kits include all necessary hardware for professional, reliable installation.
Best-Selling Truck Fenders
Buyers Product Co., Phoenix, and In The Ditch offer some of the most reliable and durable truck fender systems available. Notable models include:
- Buyers Wheels up to 24-1/2" Ribbed Poly Rear Half Fender Set W/ Mounting Kit: Durable poly fenders designed to fit a wide range of rear wheels, complete with a mounting kit for fast installation.
- Phoenix 21" Quarter Fender Half Set/Full Set: High-quality aluminum fenders with half and full set options for customizable coverage.
- In The Ditch Storage Fenders Kit: Provides both fender protection and built-in storage, perfect for service trucks and utility vehicles.
- Phoenix Half Fenders, 21" Pair: Lightweight and corrosion-resistant stainless steel fenders for a sleek, professional look.
How to Choose the Right Fender and Mount
When selecting truck fenders and mounts, consider these factors:
- Material Type: Poly fenders are flexible and impact-resistant, aluminum is lightweight and corrosion-resistant, and stainless steel offers maximum durability.
- Coverage: Half fenders typically cover the rear half of the wheel, while quarter fenders provide partial coverage for a minimalist approach.
- Mounting Style: Choose from bolt-on, grommet, or kit-included mounting systems depending on your truck setup.
- Additional Features: Built-in storage or ribbed designs can add utility and improve debris deflection.
- Wheel Size Compatibility: Ensure fender dimensions match your truck’s wheel and tire size for proper fit.
Properly chosen fenders enhance the safety, durability, and appearance of your truck, making them an essential investment for any professional driver or fleet owner.
FAQ
What types of materials are used in truck fenders?
Truck fenders are typically made from poly, aluminum, or stainless steel. Poly offers flexibility and impact resistance, aluminum is lightweight and corrosion-resistant, and stainless steel provides maximum durability.
Do these fenders fit all truck models?
Fenders come in various sizes and styles, including half and quarter designs. Always check compatibility with your truck’s make, model, and wheel size before purchasing.
Can I install these fenders myself?
Many fenders come with complete mounting kits, making DIY installation possible. Some trucks may require professional installation for optimal fit and security.
Do any fenders include storage solutions?
Yes. Certain fenders, like the In The Ditch Storage Fenders Kit, include compartments to store tools or supplies on the truck.
Q: How do I maintain my truck fenders?
Regular cleaning and inspection for cracks, dents, or corrosion will keep fenders in top condition. Aluminum and stainless steel fenders may benefit from periodic polishing.
