Phoenix USA

Phoenix electrical junction blocks are high-quality, easy-to-use terminal blocks that allow you to connect multiple electrical sources in your car, truck, trailer, or RV. They feature a two-piece design and are available with a range of poles to accommodate a variety of wiring requirements. These blocks ensure that your wires stay in place and don't contact other leads, keeping all of your electrical devices organized and safe from short circuiting.

Phoenix QuickTrim Smooth Middle Hub Cover Kit for the Front Axle on Medium and Heavy Duty Trucks. Hub Cover is 4 spline front pop-in.

Phoenix 33 mm extra long Lugnut Cover for long studs [Simulator Part].

Phoenix 18 position Junction Box that ABS construction cannot corrode. Easy to install with external mounting feet and hardware included.

This three-prong, right angle clip pigtail provides power connection for sealed lights, specifically combination stop, turn and tail lights. The red and black lead wires are bare for making power connection. Red is turn signal, and black is tail signal. The white ground wire has #10 ring terminal at the end.

This Phoenix two-prong pig tail is the plug-in for GP-131 and

Phoenix 19.5" Wheel Simulator for 8-bolt D.O.T Style. 1990 to current 4300/4600/4700 International, 2004 to current Ford F-650 and 2004 to current 258 Hino.

Phoenix QuickTrim Stainless Steel Rear Axle Hub Cover Kit for Heavy Duty Trucks. Hub Cover is 8.25" in Diameter with 2.88" Hex Bolt Center Mount for 10- lug Steel or Aluminum Wheels.

Phoenix Stainless Steel 33 mm Hex X 2 1/16" tall Lugnut Cover.

No lugnut removal is required for installation. Phoenix ABS Axle Hub Cover with Popout for 10 bolt [33 mm hex lugnut] pattern on 285 mm bolt circle.

Phoenix QuickTrim Stainless Steel Single Rear Axle Hub Cover Kit for Medium Duty Trucks.10lug on 285mm bolt. Hub Cover is 6.25" Diameter Axle with 2.88" Long spinner bolt and bracket which mounts under two axle end plate nuts on 5.25" and 5.5" bolt circle axle end plates.

Use the Phoenix 10 Pole Junction Box as a central junction block for trailers and utility truck bodies. Mounting hardware included. Get better protection for your vehicle. Fused junction boxes act as an added security blanket, making them a definite upgrade from old-fashioned, hardwired junction boxes.

Phoenix 19.5" Wheel Simulator for Ford F450/F550 - 2005-2022. Firestone / Accuride dual wheel - D.O.T Liner.

The AC12V3 portable air compressor from Phoenix USA features a 3 gallon tank and .75 HP motor and has a compact design.

Please Note: Product Discontinued - ALL SALES FINAL!

Phoenix Black Jumper Cable Connector Plug [only] with contacts for JumpMax Connector Cable - JM30 Set.

This Replacement Plug Cap protects the contacts on your jump-start pack by keeping them clean from outside elements. Includes lanyar d for easy attachment. Works with the plug assembly for SM7A and SM7B.

Phoenix Lugnut Cover with Jam Nut for the GD816 Set [Simulator Part].

Phoenix economical JumpMax 30' booster cables, constructed from 4 gauge copper wire and features removal handle as standard equipment. All necessary hardware and weather cap are included with kit.

Phoenix 1 5/8" Large. Stainless Steel D.O.T Style Lugnut Cover [Simulator Part].

Phoenix Right Hand Jam Nut fits Lg. 1 3/8" O.D. Stud Extender [Simulator Part].

This 21" wide quarter fender will fit trucks with 19.5" x 6.75" & 7.5" wide wheels. These stainless steel fender mount over single or dual wheel tires to keep sand, salt, mud, and road debris from flying forward and making a mess of the underside of your truck. They work well on car carries, keeping tool boxes and hydraulic controls clean and in good condition. Quarter fenders cover the front quarter of your tires. Include mounting hardware and complete instructions for simple installation.

Rear chromed ABS hub and lug nut cover kit. 10 lug on 285mm bolt circle, 22mm diameter lug stud. Kit includes ribbed jamnuts that are screwed over top of OE lug nuts. The hub cover then snaps securly to the ribbed jam nuts. Pop out centers for hub access. Snaps securely to the OE lug nut. Includes 2 hub covers and mounting hardware.

Note: Special Handling Fees Apply for Specific Items

Phoenix's 12 volt portable air compressor kit includes a 25' hose reel and a 12 volt portable air compressor 3 gallon tank with an.75 HP motor. With additional features including a 25' retractable hose reel kit, the choice of the standard air hose reel or a premium air hose reel and 50 amp circuit breaker, this multi-functional piece of equipment will be the answer to all your needs. Total dimensions after being assembled are 22.75" x 19.5" x 17".

• Dimensions: 22.75" x 19.5" x 17"
• Retractable 25' hose reel
• Premium Air Hose Reel: 4625-OLP
• Standard Air Hose Reel: HR3825
• 50-amp circuit breaker
• 3-gal. tank
• .75 HP
• Weight:38 lbs
• Max. Pressure Air Compressor:120 psi
• (F)NPT Outlet:1/4 in
• Cylinder Material:Steel
• Motor RPM:1,750 RPM
• Motor Type:Universal

Phoenix Wheel Simulator for Ford F450/F550 - 1999 to 2002. Firestone / Accuride dual wheel #29186 - D.O.T Liner.

Phoenix D.O.T. Liner Axle Wheel Simulator Set for 19.5" 10 Lug with 5 Hand Hole Wheels. Fits 08-Current Dodge 4500/5500. Simulators are Fast and Easy to Install and Come with All Necessary Hardware and Tool for Immediate Do-It-Yourself Installation.

Phoenix D.O.T. Liner Sprinter Chassis Dual Wheel Simulator. This Set is For 15", 6 Lug with 6 Hand Hole Wheels. Fits '03-'06 Dodge/Ram Sprinter and '03-'06 Freightliner Sprinter. Simulators are Fast and Easy to Install and Come with All Necessary Hardware and Tool for Immediate Do-It-Yourself Installation.

Phoenix 22 mm Double Shouldered Jam Nut for NH8495 Set [Simulator Part].

Note: Special Handling Fees Apply for Specific Items

Replacement stud extenders for the following simulator sets:

Phoenix Top-Mount Storage Tray for ToolBox [with Light Cut-Outs].

Replacement stud extender, option of dimensions and left or right hand threads.

This stud-mount kit lets you easily mount a Whelen light bar to any flat surface. It includes hardware and two feet that easily slide into the channel on the bottom of light bar. Adjust the mount by sliding back and forth through the light bar channel. It raises the light bar 1-1/4" off the surface.

Phoenix End Stanchion for 7/8" or 1 1/4" diameter handrail.

These stainless steel fenders mount over single or dual wheel rear tires to keep sand, salt, mud and road debris from making a mess of the underside of your truck. Quarter Fenders cover the front quarter of your tires while Half Fenders cover the top half of your tires. Include mounting hardware and complete instructions for simple installation. These 24" wide quarter fenders that fit trucks with 22.5" wheels. They work well on car carries, keeping tool boxes and hydraulic controls clean and in good condition.

Quick Liner Wheel simulator set -Polished stainless steel -hubcap style mounting, fits: 16" 8 lug 4 hand hole dual wheel

Phoenix Body Accessory Stainless Steel Tube.

6 point hex hub cover, choose from left or right hand attachments.

Phoenix 19.5" Wheel Simulator for 8-bolt D.O.T Style. 1999 to 2003 Ford F650, 1990 to 1998 Ford F600/F700, 1992 to 1996 FL50/FL60 Freightliner, 1990 to 2010 GMC C4500/C5500/C6500.

Phoenix D.O.T. Liner Dual Wheel Simulator for 16", 8 Lug with 4 Hand Hole Trailer Wheels. Fits '08-Current Ford E350/E450. Simulators are Fast and Easy to Install and Come with All Necessary Hardware and Tool for Immediate Do-It-Yourself Installation.

Phoenix Adjustable ToolBox Shelf made from galvanized steel which can be installed into virtually any 18" x 18" toolbox in a matter of minutes.

Phoenix Left Hand Jam Nut fits Large 1 3/8" O.D. Stud Extender [Simulator Part].

Use as a central fuse blocks for trailers and utility truck bodies Mounting hardware included Get better protection for your vehicle. Fused junction boxes act as an added security blanket, making them a definite upgrade from old-fashioned, hardwired junction boxes.

No lugnut removal is required for installation. Phoenix ABS Front Axle Hub Cover with Pop-out for 8-lug Alcoa rims. The Lo-Pro hubcovers offer pop-outs in front and rear for hub inspection.

Phoenix Replacement Pop-Out Center ABS Hub Covers QH1200F and QH1300AS. These Hub Covers Are For 10 Lug on 285MM Bolt Circle Wheels.

Phoenix Pressure Switch for a 12 Volt Air Compressor (part #AC12V3).

Keep the doors on your storage boxes in good working order with replacement cables from Phoenix.

Phoenix D.O.T. Liner Dual Wheel Simulator for 16", 8 Lug with 8 Hand Hole Wheels. Fits '92-'07 Ford E350/E450. Simulators are Fast and Easy to Install and Come with All Necessary Hardware and Tool for Immediate Do-It-Yourself Installation.

Used for 1996-2024 Sprinter Chassis with 16" Dual wheels

Phoenix Left or Right Hand Stud Extender for N252, N252R, N552, N552R.

Phoenix 17" 8 Lug 4 HH Wheel Simulator for Ford F350 - 2005 to 2024. Firestone / Accuride dual wheel - D.O.T Liner.

Phoenix 22 mm ABS Chrome Stud/Lugnut Cover for Q822F/Q822R.

Phoenix Center Stanchion for 7/8" or 1 1/4" diameter handrails.

Note: Special Handling Fees Apply

These 3" wide Fender Flares from Phoenix USA for a Century 400 & 600 Series body will add a custom look to your wrecker. They will also provide excellent coverage over your rear tires. The flares keep mud and debris from being thrown onto a nice paint job or on the towed vehicle. The addition of fender flares will help the truck comply with certain state tire exposure regulations. These fender flares do not fit the early 401-402 or other straight sided Century bodies. Sold as Pairs (One Left & One Right).

Cannot ship by mail.

• Here's the finishing touch for your wrecker!
• Custom designed for a perfect fit on a variety of popular wrecker body styles
• These flares can be painted to match
• Easy installation
• Create a clean custom look
• They fit light and medium duty wrecker bodies
• Priced per pair
• 3" wide
• Body Accessory for Century 411-412 & 601-602
• Do Not Fit the Early 401-402 or Other Straight Sided Century Bodies
• Old Part Number: PBF10

Phoenix 25' Clamp to Plug-in jumper cable, 4 gauge duplex welding cable with 400 Amp clamps. This connector cable is for JM254.

Phoenix 8" Stainless Steel Tow Dolly Wheel Hub Caps. Easy one piece snap on design.

Dress up your Phoenix wheel simulators with their heavy duty logo sticker.

Phoenix USA Ultimate Black Powder coated steel toolbox with stainless steel door are constructed of 13 gauge steel. All feature water resistant door gaskets and stainless steel latches.

Phoenix Wheel Liner for either the front or rear depending on which you select. This is a stainless steel DOT Mounting Style.

Phoenix Stainless Steel D.O.T. Liner Dual Rear Wheel Simulator Set. This Set is For 19.5", 10 Lug on 285MM Bolt Circle with 5 Hand Hole Wheels. Simulators are Fast and Easy to Install and Come with All Necessary Hardware and Tool for Immediate Do-It-Yourself Installation.