Cable Tensioners & Roller Fairleads

This OEM Factory Replacement Cable Tensioner, from Miller Industries, will keep constant pressure against your winch drum, which mak es your wire rope wind smoother. This 11" wide tensioner is easy to install and keeps your cable from free spooling. It will fit Ram sey 8,000 lb. worm style winches on Century Car Carriers. This part can be used to replace Part Number 124001329.

This 8.5" Heavy Duty Roller Fairlead from Miller Industries is for Century, Challenger, Champion and Vulcan Carrier Beds with a Ramsey Worm Style Winch. This fairlead fits 10 Series, 15 Series, 20 Series, 12 Series LCGs and 16 Series LCGs. This roller fairlead is designed to reduce cable wear, especially on sharp angle pulls. To view specific models of carrier this fairlead will fit see Features below. To view part schematics click on the Brochures tab.

This Roller Tensioner Kit from Ramsey Winch Company has been made special for the H-200 Series Winches used on Century Car Carriers by Miller Industries. It is Underwound Style only.

Use this Winch Level Winder to tightly respool your unloaded cabled onto the cable drum of your wrecker or car carrier winch. Tensioners prevent wire rope from kinking, backlashing and birdnesting by putting constant tension against the winch drum. This level winder fits Ramsey model 200 and 300 Series Winches.

This 11" Cable Tensioner is for use with 1/4" - 1/2" wire rope and drum sizes 10" - 11". Cable tensioners have a spring-loaded design that provides constant tension on the winch cable. This eliminates a slack cable condition and improves the winding of the cable on the drum. The rollers are high carbon steel with bronze bushings for long service life. The vertical rollers prevent the cable from rubbing the sides of the drum.

This is a warn winch 8" tension plate from Miller Industries.

This Warn Industries cable tensioner plate fits 8" drum.

These paintable Cable Tensioners keep constant pressure against your winch drum, allowing your cable to wind more smoothly. Include mounting hardware and instructions.

This is a replacment warn roller 8".

OEM Factory Replacement Cable Tensioners. These Cable Tensioners keep constant pressure against your winch drum, which makes your wire rope wind smoother.

Complete Roller Guide and Tensioner kit for Jerr Dan carriers that have Ramsey 8,000 lb and 10,000 lb worm gear winches.

This is a cable tensioner kit for DP winches with a 13-3/4" wide drum.

This Cable Tensioner from Diversified Products is 11" wide and will fit 8,000 lb. winches from Ramsey. The tensioner keeps constant pressure against your winch drum, making your wire rope wind smoother. It's also very easy to install and it keeps your cable from free spooling.

This 9" Cable Tensioner is for use with 1/4" - 1/2" wire rope and drum sizes 8" - 9". Cable tensioners have a spring-loaded design that provides constant tension on the winch cable. This eliminates a slack cable condition and improves the winding of the cable on the drum. The rollers are high carbon steel with bronze bushings for long service life. The vertical rollers prevent the cable from rubbing the sides of the drum.

This is a Miller spade weldment dock stabilizer tube. It measures 5 x 4.

Ramsey Winch level winder for Model 400 Ramsey Winch. The level winder is used to help prevent winch cables from bird nesting on the winch drum.

This Cable Tensioner is designed for rear mount winches with a 6"-7" wide drum. The tensioner guides wire rope evenly and tightly back into your winch drum.

Prevent damage to the sidewalls of your front mount winch! This rugged bolt-on roller fairlead keeps wire rope wound evenly on the drum while preventing damage to the side walls of the winch.

A 13-3/4" half round rub bar on the tensioner plate for DP winches.

Miller dp winch tensioner replacement.

This is a stainless steel plate tensioner rod from Miller Industries.

This is a replacement cable tensioner from Mile Marker Industries.

This Roller Tensioner Kit from Ramsey Winch Company is used on HD-P 8,000 and 10,000 Planetary Hydraulic Winches. It fits a Standard Drum and has Over or Underwound Styles.

A 12" half round rub bar on the tensioner plate for DP Model # 52864 winches and other DP winches with a 12" wide drum.

A 14-1/2" half round rub bar on the tensioner plate for DP winches.

Warn Industries provides a replacement 10" Fairlead roller. Horizontal roller Warn-30867 Vertical Roller Warn-30864

These Tensioners prevent Wire Rope from Kinking, Backlashing and Birdnesting by putting constant tension against the Winch Drum.

This Miller Industries Cable Tensioner will fit a DP winch on a Century 614 Wrecker with a Formula II Underlift.

Heavy Duty Roller Fairlead with 4 rollers fits the Ramsey 12,000 RX with a 11" wide drum.

This Roller Tensioner Kit from Ramsey Winch Company is used on HD-P 8,000 and 10,000 Planetary Hydraulic Winches. It fits a Standard Drum and has Over or Underwound Styles.

This Roller Tensioner Kit from Ramsey Winch Company is used on 400 Series Worm Gear Winches from Ramsey Winch. It fits a Standard Drum and has Overwound Style only.

These Tensioners prevent wire rope from kinking, backlashing and birdnesting by putting constant tension against the winch drum.

This 6-1/2" Cable Tensioner is for use with 1/4" - 1/2" wire rope and drum sizes 6" - 7". Cable tensioners have a spring-loaded desi gn that provides constant tension on the winch cable. This eliminates a slack cable condition and improves the winding of the cable on the drum. The rollers are high carbon steel with bronze bushings for long service life. The vertical rollers prevent the cable fr om rubbing the sides of the drum.

This Roller Tensioner Kit from Ramsey Winch Company is used on HD-P 8,000 and 10,000 Planetary Hydraulic Winches. It fits a Y Short Drum and has Over or Underwound Styles.

Ramsey Winch roller fairlead assembly.

Heavy Duty Roller Fairlead - Used with Ramsey RE8000R, RE10000R, RE12000R.

This Roller Tensioner Kit from Ramsey Winch Company is used on 200 and 300 Series Worm Gear Winches. It fits a Short Drum and has Overwound Style only.

Replacement Springs for CWT,HCT,820-CWT and the 925-CWT

Ramsey Winch Lever Arm-Roller Tensioner, LH

This Roller Tensioner Kit from Ramsey Winch Company has been made special for the H-200 Series Winches used on Century Car Carriers by Miller Industries. It is overwound Style only.

Ramsey Winch lever arm-roller tensioner, rh.

Warn replacement roller fairlead for XL Series long drum winches

This is a Miller cable tensioner - V-30.

Ramsey Winch lever arm-roller tensioner, RH

This Roller Tensioner Kit from Ramsey Winch Company has been made special for the H-400 Series Winches used on Century Car Carriers by Miller Industries. It is Underwound Style only.

Roller Fairlead for industrial winches with 8" drums. Replaces 30860.

These Rollers are a must when putting a Level Winder on your carrier

Warn winch rear MTG frame assembly includes rollers.

Diversified lock barrel only for tsx1c.

Ramsey replacement air cylinder roller tensioner for Hercules 50k winch.

This is a 13-3/4" half round rub bar on the tensioner plate for DP winches.

*High Strength 45 Millimeter Diameter Rollers *Permanently Lubed Bronze Bushings Provide Long Roller Life And Smooth Cable Retrieval *Heavy Duty Welded Frame *Available In Chrome Or Painted *Available For All Industrial Winches *Limited 1 Year Warranty

Ramsey roller tensioner assembly.

4-Way Roller Fairlead for 2500 lbs. Winch