Free Shipping!
Free shipping is only valid on total purchases of $199 or more and ground shipments within the contiguous 48 states for products weighing less than 150 lbs. Special handling fees may be required for some products.Shipping fees will be added for all orders under $199 or that include oversized items or any item of 150 lbs or more. Please contact customer service if you have any questions.
0 Item(s)
You have no items in your shopping cart.
-
- Shop Trucks & Trailers
- Shop Apparel
-
Shop Products
- Shop Products
- Towing Straps & Chains
-
Cargo Control
- Cargo Control
- Ratchet Straps & Tie Downs
- Winch Straps
- Flatbed Winches
- Winch Bars
- Transport Chain
- Transport Chain Hooks
- Chain Binders
- D-Rings & Tie Down Anchors
- Cargo Bars, Load Bars & Shoring Beams
- Utility Strap Assemblies
- Safety Flags
- Oversize & Wide Load Signs
- Measuring Sticks
- Cargo Accessories
- DOT Placards & Labels
- HD Truck Accessories
- Ratchets & Hardware
- Rigging & Recovery Supply
- Auto & Truck Service
- Battery Service
- Winch Lines & Hardware
- Towing Accessories
- Lockout Tools
- Tow Lights
- Emergency & Warning Lighting
- Work & Truck Lighting
- Hoses & Reels
- Safety Supplies
- Winches
- Toolboxes & Storage
-
Truck Chassis Accessories
- Truck Chassis Accessories
- Push Bumpers, Guide Lights, & Hardware
- Cameras
- Seat Covers
- Alarms & Horns
- Wheel Simulators & Hub Parts
- Tire & Wheel Supply
- Fenders
- Mico Brake Locks
- Mud Flaps
- Push Bumpers, Guide Lights, & Hardware
- Sunvisors & Mirrors
- Spring & Suspension Enhancement
- Throttle Controls
- Running Boards
- Aftermarket Fuel Tanks
- Mobile Office Vehicle Mounts
- Hitches & Accessories
- Cab Protectors & Truck Racks
- Snow Removal, Dump Bodies, & Lift Gates
- Shop Supplies
- Car Hauler Trailer Supply
- Clearance Products
-
Shop Repair Parts
- Shop Repair Parts
- Car Hauler Trailer Parts
-
Car Carrier Parts
- Car Carrier Parts
- Wheel Lift L-Arms, Outer Crosstubes & Hardware
- Pivot Pin Kits
- Wear Pad Kits
- Control Assemblies & Hardware
- Cylinder & Pin Replacement
- Tail Light Assemblies & Wiring Harnesses
- Hydraulic Valve Bodies & Service Parts
- Car Carrier Winch Repair Parts
- Removable Side Rail Replacement
- Bed Lock Hardware & Tie-Down Anchors
- Carrier Light Pylons
- Carrier Body Lighting
-
Light Duty Wrecker Parts
- Light Duty Wrecker Parts
- WheelLift L-Arms, Receivers & Hardware
- Fender Flares & Fender Flares HD
- Boom End Sheaves, Guides, & Hardware
- Cylinder and Pin Replacement
- Control Hardware
- Control Valve Bodies & Hardware
- Hydraulic Pumps, Outriggers & Repair Parts
- Control Cables & Cable Springs
- Body Lighting
- Wrecker Light Pylons
-
Medium / Heavy Wrecker Parts
- Medium / Heavy Wrecker Parts
- WheelLift L-Arms, Crossbars, Receivers & Hardware HD
- Boom End Sheaves, Guides & Hardware HD
- Cylinder and Pin Replacement HD
- Control Valve Bodies & Hardware HD
- Cable Storage Springs HD
- Remote Controls HD & Control Cables HD
- Body Lighting HD
- Wrecker Light Pylons HD
- Hydraulic Outriggers & Repair Parts HD
- Zacklift Main Body Repair Parts
- Zacklift Inner Main Repair Parts
- Zacklift Horizontal Repair Parts
- Zacklift Grid Head Repair Parts
- Zacklift Mounts & Hardware
- Snow Plow Repair Parts
- Lighting
- Tow Dolly Parts
- Automotive Positioning Dolly Parts
- Hydraulic Hardware
- Electrical Hardware
- Wheel Simulator Repair Parts
- Diesel Emission Products
- Winch Repair Parts
- Toolbox Repair Parts
- Cable & Hose Management Repair Parts
-
Shop by Parts Schematics
Order Direct from a parts diagram
-
- Shop Trucks & Trailers
- Shop Apparel
-
Shop Products
- Shop Products
- Towing Straps & Chains
-
Cargo Control
- Cargo Control
- Ratchet Straps & Tie Downs
- Winch Straps
- Flatbed Winches
- Winch Bars
- Transport Chain
- Transport Chain Hooks
- Chain Binders
- D-Rings & Tie Down Anchors
- Cargo Bars, Load Bars & Shoring Beams
- Utility Strap Assemblies
- Safety Flags
- Oversize & Wide Load Signs
- Measuring Sticks
- Cargo Accessories
- DOT Placards & Labels
- HD Truck Accessories
- Ratchets & Hardware
- Rigging & Recovery Supply
- Auto & Truck Service
- Battery Service
- Winch Lines & Hardware
- Towing Accessories
- Lockout Tools
- Tow Lights
- Emergency & Warning Lighting
- Work & Truck Lighting
- Hoses & Reels
- Safety Supplies
- Winches
- Toolboxes & Storage
-
Truck Chassis Accessories
- Truck Chassis Accessories
- Push Bumpers, Guide Lights, & Hardware
- Cameras
- Seat Covers
- Alarms & Horns
- Wheel Simulators & Hub Parts
- Tire & Wheel Supply
- Fenders
- Mico Brake Locks
- Mud Flaps
- Push Bumpers, Guide Lights, & Hardware
- Sunvisors & Mirrors
- Spring & Suspension Enhancement
- Throttle Controls
- Running Boards
- Aftermarket Fuel Tanks
- Mobile Office Vehicle Mounts
- Hitches & Accessories
- Cab Protectors & Truck Racks
- Snow Removal, Dump Bodies, & Lift Gates
- Shop Supplies
- Car Hauler Trailer Supply
- Clearance Products
-
Shop Repair Parts
- Shop Repair Parts
- Car Hauler Trailer Parts
-
Car Carrier Parts
- Car Carrier Parts
- Wheel Lift L-Arms, Outer Crosstubes & Hardware
- Pivot Pin Kits
- Wear Pad Kits
- Control Assemblies & Hardware
- Cylinder & Pin Replacement
- Tail Light Assemblies & Wiring Harnesses
- Hydraulic Valve Bodies & Service Parts
- Car Carrier Winch Repair Parts
- Removable Side Rail Replacement
- Bed Lock Hardware & Tie-Down Anchors
- Carrier Light Pylons
- Carrier Body Lighting
-
Light Duty Wrecker Parts
- Light Duty Wrecker Parts
- WheelLift L-Arms, Receivers & Hardware
- Fender Flares & Fender Flares HD
- Boom End Sheaves, Guides, & Hardware
- Cylinder and Pin Replacement
- Control Hardware
- Control Valve Bodies & Hardware
- Hydraulic Pumps, Outriggers & Repair Parts
- Control Cables & Cable Springs
- Body Lighting
- Wrecker Light Pylons
-
Medium / Heavy Wrecker Parts
- Medium / Heavy Wrecker Parts
- WheelLift L-Arms, Crossbars, Receivers & Hardware HD
- Boom End Sheaves, Guides & Hardware HD
- Cylinder and Pin Replacement HD
- Control Valve Bodies & Hardware HD
- Cable Storage Springs HD
- Remote Controls HD & Control Cables HD
- Body Lighting HD
- Wrecker Light Pylons HD
- Hydraulic Outriggers & Repair Parts HD
- Zacklift Main Body Repair Parts
- Zacklift Inner Main Repair Parts
- Zacklift Horizontal Repair Parts
- Zacklift Grid Head Repair Parts
- Zacklift Mounts & Hardware
- Snow Plow Repair Parts
- Lighting
- Tow Dolly Parts
- Automotive Positioning Dolly Parts
- Hydraulic Hardware
- Electrical Hardware
- Wheel Simulator Repair Parts
- Diesel Emission Products
- Winch Repair Parts
- Toolbox Repair Parts
- Cable & Hose Management Repair Parts
-
Shop by Parts Schematics
Order Direct from a parts diagram
Looking for apparel? Shop Zip's Outfitters
0 Item(s)
You have no items in your shopping cart.
Customers who bought this item also bought
Century Control Handle 8" Blue
This is a replacement control handle for the new Miller Car Carriers. It is
blue in color, and measures 8" long.
$35.99
Chevron Pin and Link Assembly
This Pin and Link Assembly from Miller Industries is used on the Control
Components Assembly of Chevron Car Carriers. These include 14, 16, 20 and 30
Series Car Carriers. Please see the features below for a list of trucks and see
the brochure tab for breakdowns.
$33.99
Miller Control Handle, Pivot Base
This Pivot Base Straight Control Handle from Miller Industries is used on the 6
and 9 Spool Control Station of Century Generation II 16 Series LCG Car
Carriers. Please see the brochure tab for a list of breakdowns.
$17.09
Spring, Cable Tensioner Combo
This is a replacement cable tensioner combo spring. Replaces part number:
SP8-A9018S.
$9.99
Related products
Cable Tensioner for Vulcan Wheel Snatcher, Laser, H400 Winch Drums
These paintable Cable Tensioners keep constant pressure against your winch drum, allowing your cable to wind more smoothly. Include mounting hardware and instructions.
$132.99
Miller Warn Winch 8" Tensioner
OEM Factory Replacement Cable Tensioners. These Cable Tensioners keep constant
pressure against your winch drum, which makes your wire rope wind smoother.
$244.99
Jerr-Dan 8,000 lbs Cable Guide/Tensioner Assembly
Complete Roller Guide and Tensioner kit for Jerr Dan carriers that have Ramsey
8,000 lb and 10,000 lb worm gear winches.
$759.99
Miller DP Winch 13 3/4" Wide Drum Cable Tensioner Kit
This is a cable tensioner kit for DP winches with a 13-3/4" wide drum.
$880.99
Miller Spade Weldment Dock Stabilizer Tube 5" x 4"
This is a Miller spade weldment dock stabilizer tube. It measures 5 x 4.
$226.99
B/A Products 9" Cable Tensioner
This 9" Cable Tensioner is for use with 1/4" - 1/2" wire rope and drum sizes 8" - 9". Cable tensioners have a spring-loaded design that provides constant tension on the winch cable. This eliminates a slack cable condition and improves the winding of the cable on the drum. The rollers are high carbon steel with bronze bushings for long service life. The vertical rollers prevent the cable from rubbing the sides of the drum.
$198.99
Diversified 11" Drum Cable Tensioner
This Cable Tensioner from Diversified Products is 11" wide and will fit 8,000
lb. winches from Ramsey. The tensioner keeps constant pressure against your
winch drum, making your wire rope wind smoother. It's also very easy to install
and it keeps your cable from free spooling.
$132.99
Miller 11" Cable Tensioner
This OEM Factory Replacement Cable Tensioner, from Miller Industries, will keep constant pressure against your winch drum, which mak
es your wire rope wind smoother. This 11" wide tensioner is easy to install and keeps your cable from free spooling. It will fit Ram
sey 8,000 lb. worm style winches on Century Car Carriers. This part can be used
to replace Part Number 124001329.
$168.99
Miller Heavy Duty 8.5" Fairlead Roller
This 8.5" Heavy Duty Roller Fairlead from Miller Industries is for Century,
Challenger, Champion and Vulcan Carrier Beds with a Ramsey Worm Style Winch.
This fairlead fits 10 Series, 15 Series, 20 Series, 12 Series LCGs and 16
Series LCGs. This roller fairlead is designed to reduce cable wear, especially
on sharp angle pulls. To view specific models of carrier this fairlead will fit
see Features below. To view part schematics click on the Brochures tab.
$210.99
Ramsey 200 Series Century Car Carrier Roller Tensioner Kit
This Roller Tensioner Kit from Ramsey Winch Company has been made special for
the H-200 Series Winches used on Century Car Carriers by Miller Industries. It
is Underwound Style only.
$154.99
Ramsey 200 Series Winch Level Winder
Use this Winch Level Winder to tightly respool your unloaded cabled onto the
cable drum of your wrecker or car carrier winch. Tensioners prevent wire rope
from kinking, backlashing and birdnesting by putting constant tension against
the winch drum. This level winder fits Ramsey model 200 and 300 Series Winches.
$200.99
B/A Products 11" Cable Tensioner
This 11" Cable Tensioner is for use with 1/4" - 1/2" wire rope and drum sizes 10" - 11". Cable tensioners have a spring-loaded design that provides constant tension on the winch cable. This eliminates a slack cable condition and improves the winding of the cable on the drum. The rollers are high carbon steel with bronze bushings for long service life. The vertical rollers prevent the cable from rubbing the sides of the drum.
$234.99
Cable Tensioner for Vulcan Wheel Snatcher, Laser, H400 Winch Drums
These paintable Cable Tensioners keep constant pressure against your winch drum, allowing your cable to wind more smoothly. Include mounting hardware and instructions.
$132.99
Miller Warn Winch 8" Tensioner
OEM Factory Replacement Cable Tensioners. These Cable Tensioners keep constant
pressure against your winch drum, which makes your wire rope wind smoother.
$244.99
Jerr-Dan 8,000 lbs Cable Guide/Tensioner Assembly
Complete Roller Guide and Tensioner kit for Jerr Dan carriers that have Ramsey
8,000 lb and 10,000 lb worm gear winches.
$759.99
Miller DP Winch 13 3/4" Wide Drum Cable Tensioner Kit
This is a cable tensioner kit for DP winches with a 13-3/4" wide drum.
$880.99
Miller Spade Weldment Dock Stabilizer Tube 5" x 4"
This is a Miller spade weldment dock stabilizer tube. It measures 5 x 4.
$226.99
B/A Products 9" Cable Tensioner
This 9" Cable Tensioner is for use with 1/4" - 1/2" wire rope and drum sizes 8" - 9". Cable tensioners have a spring-loaded design that provides constant tension on the winch cable. This eliminates a slack cable condition and improves the winding of the cable on the drum. The rollers are high carbon steel with bronze bushings for long service life. The vertical rollers prevent the cable from rubbing the sides of the drum.
$198.99
Diversified 11" Drum Cable Tensioner
This Cable Tensioner from Diversified Products is 11" wide and will fit 8,000
lb. winches from Ramsey. The tensioner keeps constant pressure against your
winch drum, making your wire rope wind smoother. It's also very easy to install
and it keeps your cable from free spooling.
$132.99
Miller 11" Cable Tensioner
This OEM Factory Replacement Cable Tensioner, from Miller Industries, will keep constant pressure against your winch drum, which mak
es your wire rope wind smoother. This 11" wide tensioner is easy to install and keeps your cable from free spooling. It will fit Ram
sey 8,000 lb. worm style winches on Century Car Carriers. This part can be used
to replace Part Number 124001329.
$168.99
Miller Heavy Duty 8.5" Fairlead Roller
This 8.5" Heavy Duty Roller Fairlead from Miller Industries is for Century,
Challenger, Champion and Vulcan Carrier Beds with a Ramsey Worm Style Winch.
This fairlead fits 10 Series, 15 Series, 20 Series, 12 Series LCGs and 16
Series LCGs. This roller fairlead is designed to reduce cable wear, especially
on sharp angle pulls. To view specific models of carrier this fairlead will fit
see Features below. To view part schematics click on the Brochures tab.
$210.99
Ramsey 200 Series Century Car Carrier Roller Tensioner Kit
This Roller Tensioner Kit from Ramsey Winch Company has been made special for
the H-200 Series Winches used on Century Car Carriers by Miller Industries. It
is Underwound Style only.
$154.99
Ramsey 200 Series Winch Level Winder
Use this Winch Level Winder to tightly respool your unloaded cabled onto the
cable drum of your wrecker or car carrier winch. Tensioners prevent wire rope
from kinking, backlashing and birdnesting by putting constant tension against
the winch drum. This level winder fits Ramsey model 200 and 300 Series Winches.
$200.99
B/A Products 11" Cable Tensioner
This 11" Cable Tensioner is for use with 1/4" - 1/2" wire rope and drum sizes 10" - 11". Cable tensioners have a spring-loaded design that provides constant tension on the winch cable. This eliminates a slack cable condition and improves the winding of the cable on the drum. The rollers are high carbon steel with bronze bushings for long service life. The vertical rollers prevent the cable from rubbing the sides of the drum.
$234.99
Newsletter
Information
Product Support
Customer service
Copyright © 2025 Zip's. All Rights Reserved. Seller reserves the right to adjust prices or correct errors. Privacy Policy