Diversified Push Bumper Dodge Ram 4500/5500 2011-2018 with Grille Guard

Out of stock

Price: $2,872.99

SKU: PB-3150-1C

Qty:

View Cart

Truck Freight Required

A special handling fee of $275.00 will be added to this product

Description

This Push Bumper from Diversified Products Mfg. is built for Dodge Ram 4500/5500 model years 2011-2018. It comes with a grille guard.

Specifications: Bumper profile: 17" Weight: 317 lb. Tow hook access: yes, 2 Air flow openings: yes, 2 Full-sized grille guard: standard full size Installation bracket kit: 4-point

Includes a heavy rubber faceplate and heavy duty bolt-on bracket kit for easy installation
No welding required, and no drilling in almost all cases
Access for OEM front tow hooks and air flow openings included where applicable
Adds weight to the front axle for improved front-end stability and weight distribution
Requires motor freight delivery or customer pick-up
Dipped in factory primer

Winch-mount capacities up to 16,500 lb. or more
Flush mounted 2"" or 2-1/2" receiver hitches
Heavy duty polyethylene face plates (1/2" or heavier, white or black) instead of rubber
Extra heavy weighted versions
Call with your specs and we can have these built to meet or exceed them
Chassis fog lights do not remount as standard if applicable
Actual bumper may vary from image shown
Old Part Number: HDB31C
Note: Freight Special Handling Fees May Apply
All Pushbumpers are normally dipped in red primer, Not Painted
Actual bumper may vary from image shown
Please order the “K2” versions if you’d like to install the Rubber Faceplate AFTER PAINTING

K1 on the end of a part number means that the push bumper is not primed or preassembled before shipping. It will be bare metal
K2 on the end of a part number means that the push bumper is primed but not preassembled before shipping. It will be dipped in factory primer
P on the end of a part number means that the push bumper is custom painted by Zip's. If you chose this option you will be contacted by a Zip's representative to confirm the paint color
Part numbers that do not in K1, K2 or P mean that the push bumper is primed and preassembled before shipping

Customers who bought this item also bought

Buyers Circuit Breakers Hi-Amp

These Hi-Amp Circuit Breakers are ideal for cranes, dump hoists, lift gates, plows, spreaders, switch panels and power distribution panels. Choose from 50, 80, 100, or 150 Amp Circuit Breakers. These circuit breakers double as a master disconnect as well. In the event of a "short circuit" the circuit breaker will "trip" to the off position. Unlike an automatic reset, the manual version stays open until it is manually reset. By pushing the reset button you can also disconnect the entire system. This is extremely helpful when servicing the electrical system.

$25.79 – $41.29

3M Acrylic Foam Tape

3M Acrylic Foam Tape 4229P is a 0.76mm thick, medium-density, dark grey acrylic foam double sided adhesive tape with high performance acrylic adhesives. Double Sided Acrylic foam adhesive tape is grey with red polyethylene release liner. General purpose double sided adhesive tape with superior adhesive bonding strength for a wide variety of surfaces. Can be used to stick neodymium magnets to non-ferrous material surfaces like plastic, copper, stainless steel, wood, glass, tiles, concrete as these materials does not work directly with magnets. The acrylic foam of 0.76mm thick allows the adhesive to mould to slightly rough surfaces like concrete.

$1.25

FVP Brake Cleaner 13 oz. Can

The pros know that you don't mess around when it comes to brakes. FVP Brake Cleaner meets or exceeds OE quality with a price so competitive it will stop you in your tracks. FVP Non-Chlorinated Brake Part Cleaner removes oil, grease, brake fluid and containments quickly, with no residue.

$4.49

Buyers Rectangular 1620 Lumens LED Flood Light

This waterproof Flood Light from Buyers Products has 6 white LEDs with a black powder coated cast aluminum housing. This light is a 12-24 volt system with a 1.5 Amp draw that has an output of 1620 Lumens. Light comes with an adjustable stainless steel stud mount. The dimensions for this flood light are 5.75" W x 2" T x 3" D and weights around 1.6 lbs.

$41.79

Buyers LED Strip Lighting

LED Light Strips are ideal for compartment and cargo work spaces of trucks, trailers, toolboxes, RV's and more. Space saving low profile design is 1/2" wide and only 0.2" tall. Self adhesive backing for easy installation on any surface. Includes clips and screws for alternate mounting. IP68 rated completely sealed waterproof electronics. 12 volt DC.

$16.89 – $64.99

Tow Light Four Way Socket

4 way female socket for

$15.99

Dri-Dek 1' x 1' Interlocking Tile

Every year more fleet managers, tradesmen, and fire chiefs outfit their trucks with Dri-Dek. Why? Because it works. Dri-Dek cushions equipment and when it gets wet, the raised flow-through surface lets air flow for fast drying. It stands up to oils, grease, alkalies and solvents. It supports the weight in any climate without cracking or buckling. Installs in minutes, lasts for years. Sold by square foot. Also available in 3'x4' Sheets and 3'x12' Rolls. Complete your area with the Dri-Dek corner and edge pieces to smooth and round out your full body mat.

$5.89

Buyers Delta Ring w/ Weld On Bracket

Weld these D-Rings to your Wrecker, Carrier, or Trailer to assist you with all of your tie-down and hauling needs. Includes a weld-on mounting bracket made of AISI-1025 steel for 5/8" and AISI-1045 on 3/4" and 1".

$10.59 – $19.69

Duct Tape, 48mm x 55mm

Thick silver premium duct tape.

$14.09

Temflex Vinyl Insulating Electrical Tape

Temflex vinyl insulating electrical tape. It is flame retardant, lead free, cold and sunlight resistant, suitable for use at not more than 600V and not more than 80?C (176?F).

$2.99

Solenoid Hydraulic Power Unit

Heavy Duty 12 Volt Solenoid.

$41.99

In The Ditch Aluminum Wrecker Trash Can Mounts

In The Ditch's Trash Can Mounts are made from aluminum and can be easily mounted to the deck of a wrecker or any flat surface. You can choose from either a 4 gallon trash can mount or a 6 gallon trash can mount. Both are made from 1/8" thick aluminum and are easy to install with pre-drilled mounting holes. These mounts do not include a trash can or the bungee cords. Shop for your new

$87.99

Cable Tie, Black, 11.1"

Fastenal 11.1" 50 lbs. tensile UV black nylon 6.6 Power Phase cable tie. Cable ties secure wire bundles, harnesses and components quickly without slipping. Sold Each (Individually)

$0.19

Cable Tie, Black, 7.6"

This is a 7.6" Black Cable Tie. Sold as Each.

$0.19

Phoenix Air Compressor and Hose Reel Kits

Note: Special Handling Fees Apply for Specific Items

Phoenix's 12 volt portable air compressor kit includes a 25' hose reel and a 12 volt portable air compressor 3 gallon tank with an.75 HP motor. With additional features including a 25' retractable hose reel kit, the choice of the standard air hose reel or a premium air hose reel and 50 amp circuit breaker, this multi-functional piece of equipment will be the answer to all your needs. Total dimensions after being assembled are 22.75" x 19.5" x 17".

Dimensions: 22.75" x 19.5" x 17"
Retractable 25' hose reel
Premium Air Hose Reel: 4625-OLP
Standard Air Hose Reel: HR3825
50-amp circuit breaker
3-gal. tank
.75 HP
Weight:38 lbs
Max. Pressure Air Compressor:120 psi
(F)NPT Outlet:1/4 in
Cylinder Material:Steel
Motor RPM:1,750 RPM
Motor Type:Universal

$671.99 – $913.99

Phoenix 12 Position Junction Box

Phoenix electrical junction blocks are high-quality, easy-to-use terminal blocks that allow you to connect multiple electrical sources in your car, truck, trailer, or RV. They feature a two-piece design and are available with a range of poles to accommodate a variety of wiring requirements. These blocks ensure that your wires stay in place and don't contact other leads, keeping all of your electrical devices organized and safe from short circuiting.

$16.19

Phoenix 18 Position Junction Box

Phoenix 18 position Junction Box that ABS construction cannot corrode. Easy to install with external mounting feet and hardware included.

$17.19

TowMate 17" Wireless Tow Light

This 17" Wireless Tow Light from TowMate will provide you with stop, tail, and turn signals from a low profile unit. It can be magnetically mounted to upgrade any taillight system. The light will now come standard with either a Carbon Fiber, or Diamond Plate finish. It will also be hydro dipped, which will give this bar a high sheen appearance and it will be much easier to keep clean. This light includes a charge cord that will recharge from a cigarette socket and a 4-pin round transmitter. Also included in this system is a transmitter, foot covers, and instructions. Choose from any transmitter at no additional charge. The transmitter options include 4-PIN Round (Standard), 4 PIN Flat, 6 PIN Round, 7 PIN Round, 7 PIN RV Style, and a Hardwire Transmitter.

$295.00