Diversified Products Mfg

Camlock assembly for Century Car Carrier from Diversified Products.

This replacement tow sling belt is for the Diversified 6450 heavy duty tow sling. This heavy duty sling belt is 6600 lb./pr. Load Rating, 10" x 45-1/2", (4 hole) and is sold individually.

Simple Gojak mount holds the Gojak vertical to give you more floor space on your wrecker bed.

Fold Down Bracket for light bars. This foldover kit mounts to a flat surface,usually the pylon on the wrecker.

11/16" Camlock used on Jerrdan.

This 5/8" camlock assembly from Diversified Products is designed for many different applications, but its most common use is in the towing and recovery industry. It is used on wheel restraints,tow slings, towbars and many other applications requiring a vertical or horizontal locking device.

These paintable Cable Tensioners keep constant pressure against your winch drum, allowing your cable to wind more smoothly. Include mounting hardware and instructions.

The unique key slot design in this steel plate captures trailer and tanker kingpins, making unsafe pin chaining unnecessary. Plate fits all trailer and tanker kingpins and includes two 1" screw pin anchor shackles for your tow chains.

This is a replacement dolly pry bar for dollies by Diversified Products. This bar is made from steel and measures 5' long.

The 6450 has a 5000 lb. lift capacity for applications where the conventional automotive sling is not enough. (Does not include chains or mount brackets)

These heavy-duty Steel Scotch Chocks anchor to light- and medium-duty trucks for extra holding power. Constructed with 1/4"-thick steel, chocks feature a serrated edge for increased gripping power. A 3-1/2'L chain anchors to your truck to prevent overrunning chock. Sold in pairs.

This Cable Tensioner from Diversified Products is 11" wide and will fit 8,000 lb. winches from Ramsey. The tensioner keeps constant pressure against your winch drum, making your wire rope wind smoother. It's also very easy to install and it keeps your cable from free spooling.

These rings replace your lost or damaged ones, so keep them on hand for fast replacements! Order by the diameter of your tow bar. This Rubber Ring has a 3-1/2" or 4" I.D. and fits most tow bars on the market with a 3-1/2" or 4" I.D. bottom bar.

This Push Bumper from Diversified Products Manufacturing is built for the new 2017-22 Ford F450/550 Superduty models. This bumper is for 2 wheel drive or 4 wheel drive models. The profile height of this bumper is 17" and has 2 tow hook access points. It also features 2 air flow open ings with a full size grille guard. This bumper includes a 6 point installation bracket kit.

This Push Bumper from Diversified Products Manufacturing is built for the new 2017+ Ford F450/550 Superduty models. This bumper is for 2 wheel drive or 4 wheel drive models. The profile height of this bumper is 17" and has 2 tow hook access points. It also features 2 air flow open ings. This bumper does not include a grille guard. This bumper includes a 6 point installation bracket kit.

This is a trailer plate for pd75 from Diversified Products. Use this trailer plate/fifth wheel adapter to attach your chains to a trailer's king pin. The adapter is made from 1 1/4" solid steel plate, slotted to fit a 2" kin pin, and requires a pair of 1" anchor shackles. Shackles sold separately.

Made by Diversified Products Mfg., these tow slings are designed to carry the load. All Diversified tow slings are made with a heavy duty pivot design for years of trouble free operation. (Does not include chains or mount brkts)

This Push Bumper from Diversified Products Mfg. is built for Ford F-250/350 4x4 Super Duty model years 2011-2016. It comes with a grille guard.

This Push Bumper from Diversified Products Mfg. is built for Ford F-450/550 Super Duty model years 2011-2016. It comes with a grille guard.

Plunger pin kit for Diversified sling.

This Push Bumper from Diversified Products Manufacturing is built for the new 2017-2022 Ford F250/350 Superduty models. This bumper is for 4 wheel drive models. The profile height of this bumper is 17" and has 2 tow hook access points. It also features 2 air flow openings with a full size grille guard. This bumper includes a 6 point installation bracket kit.

This is a replacement adjustable axle tube plunger by Diversified Products Manufacturing.

This Push Bumper from Diversified Products Manufacturing is built for the 2011-2019 Dodge Ram 4500/5500 models. The profile hei ght of this bumper is 17" and weighs 261 lbs. It has 2 tow hook access points with 2 air flow openings. This push bumper does not ha ve a grille guard. It does include a 4 point installation kit.

This Push Bumper from Diversified Products Mfg. is built for Dodge Ram 4500/5500 model years 2011-2018. It comes with a grille guard.

This Push Bumper from Diversified Products Mfg. is built for Dodge Ram 4500/5500 model years 2020-2024. It comes with a grille guard.

This Push Bumper from Diversified Products Mfg. is built for Ford F-250/350 Super Duty model years 2017-21. It comes with a grille guard.

This is a replacement dolly release handle latch by Diversified Products Manufacturing.

This hard-working steel tow bar is standard equipment on many medium-duty factory tow trucks on the market. 11,000-lb. lift and 22,000-lb. tow ratings.

This is a replacement lug nut for the dollies by Diversified Products Manufacturing.

This Push Bumper from Diversified Products Mfg. is built for Freightliner M2 model years 2008-2022.

This Push Bumper Facing, from Diversified Products Manufacturing, is made from rubber and measures 15" X 96".

This Push Bumper from Diversified Products Manufacturing is built for the new 2017-22 Ford F250/350 models. This bumper is for 2 wheel drive models. The profile height of this bumper is 14" and has 2 tow hook access points. It also features 2 air flow openings with a full size grille guard. This bumper includes a 4 point installation bracket kit.

Please Note: Product Discontinued - ALL SALES FINAL!

Discontinued items are not eligible for return. View Returns Policy

1" Camlock assemly.

• Length: 3.92"
• Width: 2.5"
• Height: 1.5"

This Tow Sling made by Diversified Products Mfg. is designed to carry the load. The Genuine G70 Hardware at all of the chain attachment points allows for a true 3,500 lb. lift rating and 7,500 lb. tow rating. All Diversified tow slings are made with a heavy duty pivot design for years of trouble free operation. This tow sling has 2" square hold back arms, 30" long arms and 5/8" lifting shackles. Use this tow sling on Century 411/412, Nomar, and Dynamic. This does not include chains or mounting brackets.

This Push Bumper from Diversified Products Mfg. is bulit for Ford F-450/550 Super Duty model years 2011-2016. It does not come with a grille guard.

Medium Duty Truck Hitch with 4 Rubber Rings. 8,000 lbs. capacity & 28" arms.

This product is a replacement rubber facing for Diversified Products Push Bumpers. The facing measures 18" x 96".

This Push Bumper Facing, from Diversified Products Manufacturing, is made from rubber and measures 15" x 108".

This Push Bumper from Diversified Products Mfg. is built for Ford F-250/350 2x4 Super Duty model years 2011-2016. It comes with a grille guard.

This Push Bumper Facing, from Diversified Products Manufacturing, is made from rubber and measures 12" x 108".

This Push Bumper from Diversified Products Mfg. is built for Chevy Silverado 3500HD/2500HD model years 2011-2014. It comes with a grille guard. Important Note Watch out for some Chevy/GMC OLD & NEW body styles made in years 1998-1991, 1999-2001 and 2007-2008. Chevy/GMC trucks in those years have some versions that are different body styles with the same model number. They sold some of the older styles and identified them as the newer model years (i.e. some 1989-1991Chevy/GMC trucks are actually 1988 bodies with VIN's that identify them as 1989, 1990 or 1991 and some 1999-2001's are the bodies of the 1998's). Please call and speak with a parts representative if you are unsure about which bumper to order. Specifications * Bumper profile: 17 - 19" * Weight: 260 lb. * Tow hook access: yes, 2 * Air flow openings: yes, 2 * Full-sized grille guard: standard full size * Installation bracket kit: standard 2-point * K1 on the end of a part number means that the push bumper is not primed or preassembled before shipping. It will be bare metal. * K2 on the end of a part number means that the push bumper is primed but not preassembled before shipping. It will be dipped in factory primer. * P on the end of a part number means that the push bumper is custom painted by Zip's. If you chose this option you will be contacted by a Zip's representative to confirm the paint color. * Part numbers that do not in K1, K2 or P mean that the push bumper is primed and preassembled before shipping.

Scotch blocks anchor to your truck for extra holding power. Scotch Blocks feature 1/4" thick steel construction with a serrated edge on the bottom for a strong grip. The 3-1/2'L chain attaches to a key hole.

This Push Bumper from Diversified Products Mfg. is built for Chevy Silverado 3500HD/2500HD model years 2015-2019. It has an extended (taller) profile and comes with a grille guard.

This Push Bumper from Diversified Products Manufacturing is built for the new 2017-22 Ford F250/350 models. This bumper is for 2 wheel drive models. The profile height of this bumper is 14" and has 2 tow hook access points. It also features 2 air flow openings. This bumper does not include a grille guard. This bumper includes a 4 point installation bracket kit.

This Push Bumper from Diversified Products Manufacturing is built for the new 2017-22 Ford F250/350 Superduty models. This bumper is for 4 wheel drive models. The profile height of this bumper is 17" and has 2 tow hook access points. It also features 2 air flow openings. This bumper does not include a grille guard. This bumper includes a 6 point installation bracket kit.

This Push Bumper from Diversified Products Mfg.is built for International 4300 and MV607 with the 6.7L engine. It comes with the passenger side only radiator / tow hook mounting bracket extension.

This Push Bumper Facing, from Diversified Products Manufacturing, is made from rubber and measures 12" X 80".

This Bolt-On Corner Mounting Bracket are used on trucks without pre-fabricated brackets.

This Push Bumper from Diversified Products Manufacturing is built for the 2015-2019 Chevy Silverado 2500HD/3500HD models. The profile height of this bumper is 17" and weighs 285 lbs. It has 2 tow hook acces s points with 2 air flow openings. This push bumper f eatures a full size grille guard with a 6 point installation bracket kit.

This Push Bumper from Diversified Products Manufacturing is built for the new 2016-21 Ford F650/750 models. This bumper is for 4 wheel drive models. The profile height of this bumper is 17" and has 2 tow hook access points. It also features 3 air flow openings. Thi s bumper does not include a grille guard. This bumpers includes a 4 point installation bracket kit.

This Push Bumper from Diversified Products Mfg. is built for Hino 238/258/268/338, all model years. It does not come with a grille guard.

This Push Bumper from Diversified Products Mfg. is built for Ford F-250/350 2x4 Super Duty model years 1999-2004. It comes with a grille guard.

This Push Bumper from Diversified Products Mfg. is built for International Durastar 4400 model years 2011-2015 and 4200/4300 model years 2011-2013. It comes with dual radiator / tow hook mounting bracket extensions only.

This Push Bumper from Diversified Products Mfg. is built for 2003-2011 Chevy/GMC 4500/5500/6500 model years.

This Push Bumper from Diversified Products Mfg. is built for Ford F-450/550 Super Duty model years 2005-2007. It comes with a grill guard. This model does not require the OEM bumper valance because it has a bi-level all steel top.

These Push Bumpers from Diversified Products Manufacturing are built for the new 2017 and 2022 Ford F450/550 Superduty models. The se bumpers are available with or without a grille guard. Please select which one you want from the dropdown above. These bumpers hav e a profile height of 17?. These bumpers can fit various models of winches. Please contact the Zip?s Parts Department to verify your winch will work with this bumper.

Diversified Products provides a replacement mounting for PB-9300T-1C.

This Push Bumper from Diversified Products Mfg.is built for all model years of International 4600/4700/4900's.

This Push Bumper from Diversified Products Mfg. is built for Ford F-650/750 model years 2004-2007. It does not come with a grille guard.

This Push Bumper from Diversified Products Mfg. is built for Ford F-250/350 4x4 Super Duty model years 2011-2022. It does not come with a grille guard.