Free shipping is only valid on total purchases of $199 or more and ground shipments within the contiguous 48 states for products weighing less than 150 lbs. Special handling fees may be required for some products.Shipping fees will be added for all orders under $199 or that include oversized items or any item of 150 lbs or more. Please contact customer service if you have any questions.
Update worn and tired straps on your In The Ditch Speed Tow dolly with this replacement strap. The black strap includes a ratchet and coated S-hooks for proper securement of a tire to the tow dolly.
This Universal Mount system is a perfect choice for those wanting a low profile all-in-one mount that holds a Speed Dolly frame, axle and break over bar. The Universal Mount uses the same bolt pattern that is pre-drilled in Jerr-Dan MPL, MPL40 and Element wrecker bodies but can be used on any brand wrecker body. The Kit comes complete with everything needed to hold 2 Dolly frames, 1 break over bar and 2 axles and comes in our Tuff Coat Black Finish. Pick from the Standard or the XD Mounts. The Standard Mount is made for 2 Speed Dollies with 4.80 Tires. The XD Mount is made for 2 XD Dollies with 5.70 Tires. Sold as set.
Collins Hi-Speed® Dollies are the safest and lightest-weight PRIME-MOVERS of vehicles, with the heaviest load capacity – up to 25 times its own weight, and with no towing-distance restrictions, (tested to 1,600 FREEWAY miles). They were tested at the GM Proving Grounds in the U.S., as well as undergoing extreme, rigorous testing at the Mira Proving Grounds in the U.K. for European Certification. Having successfully passed these grueling tests and becoming certified, the Collins Hi-Speed® Dolly is the most proven dolly of all time.
These Pro Series Dolly Bunks from In The Ditch fit all sizes and all brands of dollies with either 4.80 x 8 or 5.70 x 8 tires. Dolly bunks are made from 3/16" thick aluminum and will last for years. This set includes two complete bunks and two lockable retaining chains.
The Speed Spacer from In The Ditch solves that age old problem of how to dolly a vehicle with a flat tire. They have designed the Speed Spacer as a tool to take up space that a tire full of air would have occupied. made from high strength aluminum the Speed Spacer is not only strong, it is light and easy to install. It is sold as an individual item so you need to order (2) in order to make a set for one side of your dolly.
GoJak Dollies are the solution to your automobile positioning problems. GoJaks operate on the principle of a quick action, bi-directional, double-pawl ratchet. Mechanical leverage applied to the foot pedal progressively "squeezes" the vehicle tire between the rollers until the tire lifts smoothly off the ground. The rollers touch only the tire and no contact is made with the vehicles frame or undercarriage. The low center of gravity after lifting helps make these dollies safe and stable in use. The pure mechanical design
eliminates the need for electric power, compressed air, or slow hydraulics.
These dolly sets from In The Ditch offfer the best capacity with either a powder-coated or zinc plated frame and aluminum axle. As with any X-Series model, the manufacturer has added a fifth adjustment hole to widen the dolly combination to 85 inches, and the wheels feature a patented cam-lock design to move from storage position to on-the-road use. The unit is also low maintenance as the sealed hub never needs to be greased and the bolt-on spindles are easy to replace. These dollies are available with either 4.80 or 5.70 tire size.
In The Ditch's Locking Simple Mount is a great low cost way to hold your Speed Dollies and keep them safe. This mount is the same as the Simple Mounts but now they feature the new speed lock on them. This mount is made from steel and comes in a tuff coat black finish. Choose from the Standard or the XD Mounts. The Standard is made for 4.8 Tires and the XD is made for 5.70 tires. Sold as
Each.
These In The Ditch tow dollies hold up well against road grime, while the lightweight aluminum axle and ergonomic handle make it simple to maneuver on the recovery site. Bolt-on spindles are easy to replace with basic hand tools, and the speed-lube design (SLX) makes packing bearings effortless with a center grease zerk on this assembly. These dollies feature best in class capacity, and are available in powder coat black or zinc plated finish. They are also available with a tire size of 4.80 or 5.70.
This "W" Mount from In The Ditch is great for those wanting an easy solution for quickly mounting and storing their break over bar and axles. This mount is ideal for mounting in the back of a pickup, on top of a tool box or on a wrecker deck. Mount can be locked by using a Pad-Lock, which is not included. The break over bar is secured in place with a thumbscrew. This mount is made from steel and comes with a black finish. Get your
Collins Hi-Speed® Dollies are the safest and lightest-weight PRIME-MOVERS of vehicles, with the heaviest load capacity – up to 25 times its own weight, and with no towing-distance restrictions, (tested to 1,600 FREEWAY miles). They were tested at the GM Proving Grounds in the U.S., as well as undergoing extreme, rigorous testing at the Mira Proving Grounds in the U.K. for European Certification. Having successfully passed these grueling tests and becoming certified, the Collins Hi-Speed® Dolly is the most proven dolly of all time.
These are deck mounted spindle mount brackets for Collins Manufacturing Dollies. These mounts come in 2 different sizes depending on the tire size of your dolly. Please select your tire size from the dropdown menu to select the correct mount you will need for your application. These mounts are sold as pairs.
This is a locking dolly axle mounting system, by Collins Manufacturing, will ensure safe storage for your cross rails and pry bar. It can be mounted to the deck for easy accessibility. This system allows you to pad lock your axles to prevent theft. These mounts come factory powder coated black.
Update worn and tired straps on your In The Ditch Speed Tow dolly with this replacement strap. The black strap includes a ratchet and coated S-hooks for proper securement of a tire to the tow dolly.
This Universal Mount system is a perfect choice for those wanting a low profile all-in-one mount that holds a Speed Dolly frame, axle and break over bar. The Universal Mount uses the same bolt pattern that is pre-drilled in Jerr-Dan MPL, MPL40 and Element wrecker bodies but can be used on any brand wrecker body. The Kit comes complete with everything needed to hold 2 Dolly frames, 1 break over bar and 2 axles and comes in our Tuff Coat Black Finish. Pick from the Standard or the XD Mounts. The Standard Mount is made for 2 Speed Dollies with 4.80 Tires. The XD Mount is made for 2 XD Dollies with 5.70 Tires. Sold as set.
Collins Hi-Speed® Dollies are the safest and lightest-weight PRIME-MOVERS of vehicles, with the heaviest load capacity – up to 25 times its own weight, and with no towing-distance restrictions, (tested to 1,600 FREEWAY miles). They were tested at the GM Proving Grounds in the U.S., as well as undergoing extreme, rigorous testing at the Mira Proving Grounds in the U.K. for European Certification. Having successfully passed these grueling tests and becoming certified, the Collins Hi-Speed® Dolly is the most proven dolly of all time.
These Pro Series Dolly Bunks from In The Ditch fit all sizes and all brands of dollies with either 4.80 x 8 or 5.70 x 8 tires. Dolly bunks are made from 3/16" thick aluminum and will last for years. This set includes two complete bunks and two lockable retaining chains.
The Speed Spacer from In The Ditch solves that age old problem of how to dolly a vehicle with a flat tire. They have designed the Speed Spacer as a tool to take up space that a tire full of air would have occupied. made from high strength aluminum the Speed Spacer is not only strong, it is light and easy to install. It is sold as an individual item so you need to order (2) in order to make a set for one side of your dolly.
GoJak Dollies are the solution to your automobile positioning problems. GoJaks operate on the principle of a quick action, bi-directional, double-pawl ratchet. Mechanical leverage applied to the foot pedal progressively "squeezes" the vehicle tire between the rollers until the tire lifts smoothly off the ground. The rollers touch only the tire and no contact is made with the vehicles frame or undercarriage. The low center of gravity after lifting helps make these dollies safe and stable in use. The pure mechanical design
eliminates the need for electric power, compressed air, or slow hydraulics.
These dolly sets from In The Ditch offfer the best capacity with either a powder-coated or zinc plated frame and aluminum axle. As with any X-Series model, the manufacturer has added a fifth adjustment hole to widen the dolly combination to 85 inches, and the wheels feature a patented cam-lock design to move from storage position to on-the-road use. The unit is also low maintenance as the sealed hub never needs to be greased and the bolt-on spindles are easy to replace. These dollies are available with either 4.80 or 5.70 tire size.
In The Ditch's Locking Simple Mount is a great low cost way to hold your Speed Dollies and keep them safe. This mount is the same as the Simple Mounts but now they feature the new speed lock on them. This mount is made from steel and comes in a tuff coat black finish. Choose from the Standard or the XD Mounts. The Standard is made for 4.8 Tires and the XD is made for 5.70 tires. Sold as
Each.
These In The Ditch tow dollies hold up well against road grime, while the lightweight aluminum axle and ergonomic handle make it simple to maneuver on the recovery site. Bolt-on spindles are easy to replace with basic hand tools, and the speed-lube design (SLX) makes packing bearings effortless with a center grease zerk on this assembly. These dollies feature best in class capacity, and are available in powder coat black or zinc plated finish. They are also available with a tire size of 4.80 or 5.70.
This "W" Mount from In The Ditch is great for those wanting an easy solution for quickly mounting and storing their break over bar and axles. This mount is ideal for mounting in the back of a pickup, on top of a tool box or on a wrecker deck. Mount can be locked by using a Pad-Lock, which is not included. The break over bar is secured in place with a thumbscrew. This mount is made from steel and comes with a black finish. Get your
Collins Hi-Speed® Dollies are the safest and lightest-weight PRIME-MOVERS of vehicles, with the heaviest load capacity – up to 25 times its own weight, and with no towing-distance restrictions, (tested to 1,600 FREEWAY miles). They were tested at the GM Proving Grounds in the U.S., as well as undergoing extreme, rigorous testing at the Mira Proving Grounds in the U.K. for European Certification. Having successfully passed these grueling tests and becoming certified, the Collins Hi-Speed® Dolly is the most proven dolly of all time.
These are deck mounted spindle mount brackets for Collins Manufacturing Dollies. These mounts come in 2 different sizes depending on the tire size of your dolly. Please select your tire size from the dropdown menu to select the correct mount you will need for your application. These mounts are sold as pairs.
This is a locking dolly axle mounting system, by Collins Manufacturing, will ensure safe storage for your cross rails and pry bar. It can be mounted to the deck for easy accessibility. This system allows you to pad lock your axles to prevent theft. These mounts come factory powder coated black.