Free shipping is only valid on total purchases of $199 or more and ground shipments within the contiguous 48 states for products weighing less than 150 lbs. Special handling fees may be required for some products.Shipping fees will be added for all orders under $199 or that include oversized items or any item of 150 lbs or more. Please contact customer service if you have any questions.
This lightweight Breakover Bar from In The Ditch was designed to work with a Speed Dolly and XD Dolly. It has a soft grip handle, and it is the lightest dolly bar on the market.
Prolong the life of and prevent maintenance issues on your In The Ditch Speed Dolly with this replacement 4 on 4" cast hub and bearing assembly. 1250-lb. capacity when assembled. This hub is for the SLX (Greaseable) style dollies. These are NOT interchangeable with the XL (Sealed Hub) dollies
This machined-aluminum wheel is an exclusive design from In The Ditch. The rim is a replacement part for the ITD Speed Dolly and has met all of the DOT requirements.Rim comes with a high pressure valve stem installed.
This machined-aluminum wheel is an exclusive design from In The Ditch. The rim is a replacement part for the ITD Speed Dolly and has met all of the DOT requirements.Rim comes with a high pressure valve stem installed.
Make your recoveries easier with The RimSling! This synthetic rope sling is
designed slimmer yet has a higher . The RimSling has a protective Cordura
Sleeve over the entire sling giving it maximum protection. Also, it has a
special braid guard at the center of the sling providing extended life. A 6"
sling eye is located on either end of the sling. The RimSling is also Made in
the USA!
These Eye Slings feature a texturized, abrasion-resistant nylon jacket that
covers the sling body where abrasion is a problem. Maintains the basic Tuflex
features and forms two color-coded lifting eyes. Meets ASME-B30.9 standards
and regulations. Read details on pg. 7 and 8 in brochure.
AmSteel-Blue Synthetic Rope is a proven alternative to steel cables and steel
winch lines. Size-for-size, AmSteel-Blue is the same strength as steel wire
rope - yet it floats! These 12-strand, single braid winch lines yield the
maximum in strength-to-weight ratio and are torque free. Meaning attachment
hardware with a swivel is not necessary. AmSteel-Blue has extremely limited
stretching - only 1% at full WLL (4:1). Also, AmSteel-Blue Rope has superior flex fatigue and
is abrasion resistant.
When compared to steel cables, AmSteel-Blue Winch Line Extensions are a fraction of the
weight. For example, a 3/4 " x 100' steel cable weighs 100 lbs while an
AmSteel-Blue rope with the same dimensions only weighs 13.3 lbs - almost 8
times lighter! Just think about how much easier the handling of the synthetic
Amsteel-Blue is for your operators verses a steel cable. Also, it drastically
cuts down on the overall weight of your truck - especially heavy duty rotator
wreckers which have up to 5 to 6 winches!
Available in Classic, Tower's Edge or Heavy Duty webbing these 2" straps come
with a flat snap hook attached at one end of each. A Cordura sleeve provides
added protection on each strap. These straps are commonly used on Dynamic Tow
Trucks. Wheel Lift Straps are perfect for securing vehicles tires to any wheel
lift.
Collins Dolly Replacement Side Frame is a complete dolly frame assembled with bare spindles. Replacement frame for: CAH35A, CAH35B, CAH35C, CAH35D, CAH35AA, CAH35BA, CAH35CA, CAH35DA.
Note: Special Handling Fees Apply for Specific Items
This is a replacement In The Ditch dolly side frame for the XL Standard Duty X-Series Dolly. This is a complete side frame that includes hubs and 4.80 tires.
Available in a Tuff Coat Black or Plated Zinc Chromate finish
Note: Special Handling Fees Apply
One side of Collins Dollies SLZ Hi-Speed Dolly with diamond-cut aluminum wheels and 8" tires. The polished wheels and matching slotted hub allows dynamic air flow through the openings, meaning hubs and bearings last even longer while reducing overall dolly weight. The anti-corrosion finish will hold up to the most severe weather conditions.
Collins Dolly Replacement Side Frame is a complete dolly frame assembled with bare spindles. Replacement frame for: CAH35A, CAH35B, CAH35C, CAH35D, CAH35AA, CAH35BA, CAH35CA, CAH35DA.
Note: Special Handling Fees Apply for Specific Items
This is a replacement In The Ditch dolly side frame for the XL Standard Duty X-Series Dolly. This is a complete side frame that includes hubs and 4.80 tires.
Available in a Tuff Coat Black or Plated Zinc Chromate finish
Note: Special Handling Fees Apply
One side of Collins Dollies SLZ Hi-Speed Dolly with diamond-cut aluminum wheels and 8" tires. The polished wheels and matching slotted hub allows dynamic air flow through the openings, meaning hubs and bearings last even longer while reducing overall dolly weight. The anti-corrosion finish will hold up to the most severe weather conditions.