0 Item(s)
You have no items in your shopping cart.
Customers who bought this item also bought
Slip Plate #1 Dry Film Graphite Lubricant
Slip Plate is a heavy duty all purpose dry film graphite lubricant. It will not collect dirt, dust, mud or grit. Bonds quickly to any clean surface, eliminates sticking and material buildup. Will not wash away.
$12.99
–
$151.99
B/A Products Anchor Shackle Screw Pin, Alloy
This Screw Pin Anchor Shackle is made from alloy and is easy to remove. Use
this shackle when repairing links or fitting attachments. It has an open throat
design and requires no special tools to use.
$11.99
–
$118.99
FVP Brake Cleaner 13 oz. Can
The pros know that you don't mess around when it comes to brakes. FVP Brake Cleaner meets or exceeds OE quality with a price so competitive it will stop you in your tracks. FVP Non-Chlorinated Brake Part Cleaner removes oil, grease, brake fluid and containments quickly, with no residue.
$4.49
Cable Tie, Black, 11.1"
Fastenal 11.1" 50 lbs. tensile UV black nylon 6.6 Power Phase cable tie.
Cable ties secure wire bundles, harnesses and components quickly without
slipping. Sold Each (Individually)
$0.19
Zip's Endless Loop Round Slings
Zips Endless Round Slings feature a Safety Factor of 5:1. The inner core is made from high-tensile polyester fiber to provide the maximum possible strength. Each sling is color coded according to capacity. See drop down menu for available lengths. See chart for sling capacity.
$6.99
–
$347.99
Zip's Snatch Block with Swivel Hook
Zip's high-quality, low-cost snatch blocks are available in four rope sizes
with working load limits up to 30,000 lbs. These blocks also feature a
spring-loaded latch that adds a layer of safety to the recovery scene. See
the drop-down menu for available sizes and working load limits.
$36.99
–
$384.99
Century Slide Pad Boom Bottom 15" x 3" Wreckers
This Boom Bottom Slide Pad from Miller Industries is 15" long and 3" wide. It
is used on the Boom and Outrigger Assembly of Century and Challenger Wreckers
from Miller Industries. Please see the features below for a list of Wreckers
and see the brochure tab for breakdowns.
$70.99
Century Cable Tie Back HD Wreckers
This spring secures winch cable hook on large wreckers. This spring is used on
Vulcans and late model Century units as a cable tie-back. This spring links to
the hook with a pear link #9048800. Uses a 12-0804054 cable tie-back mounting
tube. Compatible with 2004 Units and Newer.
$26.49
Tork Advanced ShopMax Centerfeed Shop Towels
Tork Advanced ShopMax Wiper 450 Center-feed shop towels are highly absorbent, offering excellent wipe-dry capabilities. Their strong construction offers durability and the self-dispensing pop-up box offers controlled dispensing. They contain 85% paper content (60% recycled, 40% postindustrial) and 15% synthetic emulsion. Sold in a box of 200.
$21.99
Miller Screw, Hex Head Cap, 3/8" x 7/8"
Hex Head Cap Screws are designed for easy assembly into a tapped hole. This
screw meets SAE specifications with a specially designed washer face under the
head and a chamfered point. The zinc plating slows the corrosion rate making it
last through the elements. This screw is 3/8" diameter x 7/8" long. It is used
on the Wheel Lift Assembly of Champion Carriers prior to 2001, and Vulcan 10
Series Carriers made from 2003-2005. See the features below, and the brochure
tab for a list of breakdowns.
$0.19
Miller Recovery Boom Wear Pad, 3/4" x 1" x 4"
This is a replacement wear pad used in the recovery boom assembly of heavy duty
wreckers by Miller Industries. This wear pad is used in between the second and
third stages of the wrecker boom and helps prevent damage to the boom
weldments. This wear pad measures 3/4" x 1" x 4". To view the models this pad
will fit see Features below. To view the part schematics click on the Brochure
tab above.
$18.49
Miller, 6" Oval Light, Clear/Red
The light has a constant halo effect, meaning the light is constantly running.
While your truck is turned on, the outer ring of the light will be lit and when
you stop the middle lights will light up along side the outer lights.
$55.99
Miller Air Cylinder, 1.5" Bore and 1.71" Stroke
This Air Cylinder from Miller Industries has a 1.5" Bore and a 1.71" Stroke.
This cylinder is used on the assembly of many Century Wreckers, including
11075S/SDU4 Wreckers, 1140/1130/SDU4/LDU Wreckers and 1040B/SDU3 Wreckers. It
is also used on the assembly on Challenger 9909 and 8808 Rotators.
$141.99
Related products
Chevron Pin and Link Assembly
This Pin and Link Assembly from Miller Industries is used on the Control
Components Assembly of Chevron Car Carriers. These include 14, 16, 20 and 30
Series Car Carriers. Please see the features below for a list of trucks and see
the brochure tab for breakdowns.
$33.99
Miller 6.5" Thrust Washer Century / Challenger / Holmes
This 6.5" Thrust Washer from Miller Industries is used with a pivot pin in many
different Miller Wrecker assemblies. These assemblies include the boom, wheel
lift, crossbar, and underlift assemblies of Century, Challenger, and Holmes
Wreckers. Please see the brochure for a full list of breakdowns.
$12.99
Miller Inner Boom Bushing
This Bronze Bushing from Miller Industries is used on the Inner Boom of the
Wheel Lift Assembly of Champion Car Carriers made before 2001. This busing has
a 3" inner diameter. See the features below for a full list of carriers.
This part can be used to replace Part Numbers: 12-0301914 and 12-0301383.
$86.99
Handle Bracket
This is a handle bracket for Gresen V20 Valve. This piece bolts onto the valve
assembly itself and is use to hold the control rod linkage to the valve.
$39.99
Ramsey Seal Kit
This gasket and seal kit is for the H-200 series Ramsey winch with the " keyhole style " worm gear housing cover.
$73.99
Cable Tie, Black, 11.1"
Fastenal 11.1" 50 lbs. tensile UV black nylon 6.6 Power Phase cable tie.
Cable ties secure wire bundles, harnesses and components quickly without
slipping. Sold Each (Individually)
$0.19
Miller Grommet, Rubber, Century and Vulcan Wreckers
This Rubber Grommet from Miller Industries is used on the Body Assembly and Light Accessory Assemblies of Miller Wreckers. These include Century, Challenger, Holmes and Vulcan Wreckers. Please see the features below for a list of wreckers and see the brochure tab for breakdowns. This part can be used to replace Part Number FF-116.
$2.99
Washer, Flat 5/16" Stainless Steel 18-8
Fastenal 5/16" 18-8 stainless steel small OD flat washer.
$0.09
Miller Composite Bell Crank
This Composite Bell Crank from Miller Industries is used on the 6 and 9 Spool
Control Station of Century Generation II LCG 16 Series Steel & Aluminum Car
Carriers. These carriers are made in 2014 or later. Please see the brochure tab
for a list of breakdowns.
$13.29
Chevron Pin and Link Assembly
This Pin and Link Assembly from Miller Industries is used on the Control
Components Assembly of Chevron Car Carriers. These include 14, 16, 20 and 30
Series Car Carriers. Please see the features below for a list of trucks and see
the brochure tab for breakdowns.
$33.99
Miller 6.5" Thrust Washer Century / Challenger / Holmes
This 6.5" Thrust Washer from Miller Industries is used with a pivot pin in many
different Miller Wrecker assemblies. These assemblies include the boom, wheel
lift, crossbar, and underlift assemblies of Century, Challenger, and Holmes
Wreckers. Please see the brochure for a full list of breakdowns.
$12.99
Miller Inner Boom Bushing
This Bronze Bushing from Miller Industries is used on the Inner Boom of the
Wheel Lift Assembly of Champion Car Carriers made before 2001. This busing has
a 3" inner diameter. See the features below for a full list of carriers.
This part can be used to replace Part Numbers: 12-0301914 and 12-0301383.
$86.99
Handle Bracket
This is a handle bracket for Gresen V20 Valve. This piece bolts onto the valve
assembly itself and is use to hold the control rod linkage to the valve.
$39.99
Ramsey Seal Kit
This gasket and seal kit is for the H-200 series Ramsey winch with the " keyhole style " worm gear housing cover.
$73.99
Cable Tie, Black, 11.1"
Fastenal 11.1" 50 lbs. tensile UV black nylon 6.6 Power Phase cable tie.
Cable ties secure wire bundles, harnesses and components quickly without
slipping. Sold Each (Individually)
$0.19
Miller Grommet, Rubber, Century and Vulcan Wreckers
This Rubber Grommet from Miller Industries is used on the Body Assembly and Light Accessory Assemblies of Miller Wreckers. These include Century, Challenger, Holmes and Vulcan Wreckers. Please see the features below for a list of wreckers and see the brochure tab for breakdowns. This part can be used to replace Part Number FF-116.
$2.99
Washer, Flat 5/16" Stainless Steel 18-8
Fastenal 5/16" 18-8 stainless steel small OD flat washer.
$0.09
Miller Composite Bell Crank
This Composite Bell Crank from Miller Industries is used on the 6 and 9 Spool
Control Station of Century Generation II LCG 16 Series Steel & Aluminum Car
Carriers. These carriers are made in 2014 or later. Please see the brochure tab
for a list of breakdowns.
$13.29
