Free Shipping!
Free shipping is only valid on total purchases of $199 or more and ground shipments within the contiguous 48 states for products weighing less than 150 lbs. Special handling fees may be required for some products.Shipping fees will be added for all orders under $199 or that include oversized items or any item of 150 lbs or more. Please contact customer service if you have any questions.
0 Item(s)
You have no items in your shopping cart.
-
- Shop Trucks & Trailers
- Shop Apparel
-
Shop Products
- Shop Products
- Towing Straps & Chains
-
Cargo Control
- Cargo Control
- Ratchet Straps & Tie Downs
- Winch Straps
- Flatbed Winches
- Winch Bars
- Transport Chain
- Transport Chain Hooks
- Chain Binders
- D-Rings & Tie Down Anchors
- Cargo Bars, Load Bars & Shoring Beams
- Utility Strap Assemblies
- Safety Flags
- Oversize & Wide Load Signs
- Measuring Sticks
- Cargo Accessories
- DOT Placards & Labels
- HD Truck Accessories
- Ratchets & Hardware
- Rigging & Recovery Supply
- Auto & Truck Service
- Battery Service
- Winch Lines & Hardware
- Towing Accessories
- Lockout Tools
- Tow Lights
- Emergency & Warning Lighting
- Work & Truck Lighting
- Hoses & Reels
- Safety Supplies
- Winches
- Toolboxes & Storage
-
Truck Chassis Accessories
- Truck Chassis Accessories
- Push Bumpers, Guide Lights, & Hardware
- Cameras
- Seat Covers
- Alarms & Horns
- Wheel Simulators & Hub Parts
- Tire & Wheel Supply
- Fenders
- Mico Brake Locks
- Mud Flaps
- Push Bumpers, Guide Lights, & Hardware
- Sunvisors & Mirrors
- Spring & Suspension Enhancement
- Throttle Controls
- Running Boards
- Aftermarket Fuel Tanks
- Mobile Office Vehicle Mounts
- Hitches & Accessories
- Cab Protectors & Truck Racks
- Snow Removal, Dump Bodies, & Lift Gates
- Shop Supplies
- Car Hauler Trailer Supply
- Clearance Products
-
Shop Repair Parts
- Shop Repair Parts
- Car Hauler Trailer Parts
-
Car Carrier Parts
- Car Carrier Parts
- Wheel Lift L-Arms, Outer Crosstubes & Hardware
- Pivot Pin Kits
- Wear Pad Kits
- Control Assemblies & Hardware
- Cylinder & Pin Replacement
- Tail Light Assemblies & Wiring Harnesses
- Hydraulic Valve Bodies & Service Parts
- Car Carrier Winch Repair Parts
- Removable Side Rail Replacement
- Bed Lock Hardware & Tie-Down Anchors
- Carrier Light Pylons
- Carrier Body Lighting
-
Light Duty Wrecker Parts
- Light Duty Wrecker Parts
- WheelLift L-Arms, Receivers & Hardware
- Fender Flares & Fender Flares HD
- Boom End Sheaves, Guides, & Hardware
- Cylinder and Pin Replacement
- Control Hardware
- Control Valve Bodies & Hardware
- Hydraulic Pumps, Outriggers & Repair Parts
- Control Cables & Cable Springs
- Body Lighting
- Wrecker Light Pylons
-
Medium / Heavy Wrecker Parts
- Medium / Heavy Wrecker Parts
- WheelLift L-Arms, Crossbars, Receivers & Hardware HD
- Boom End Sheaves, Guides & Hardware HD
- Cylinder and Pin Replacement HD
- Control Valve Bodies & Hardware HD
- Cable Storage Springs HD
- Remote Controls HD & Control Cables HD
- Body Lighting HD
- Wrecker Light Pylons HD
- Hydraulic Outriggers & Repair Parts HD
- Zacklift Main Body Repair Parts
- Zacklift Inner Main Repair Parts
- Zacklift Horizontal Repair Parts
- Zacklift Grid Head Repair Parts
- Zacklift Mounts & Hardware
- Snow Plow Repair Parts
- Lighting
- Tow Dolly Parts
- Automotive Positioning Dolly Parts
- Hydraulic Hardware
- Electrical Hardware
- Wheel Simulator Repair Parts
- Diesel Emission Products
- Winch Repair Parts
- Toolbox Repair Parts
- Cable & Hose Management Repair Parts
-
Shop by Parts Schematics
Order Direct from a parts diagram
-
- Shop Trucks & Trailers
- Shop Apparel
-
Shop Products
- Shop Products
- Towing Straps & Chains
-
Cargo Control
- Cargo Control
- Ratchet Straps & Tie Downs
- Winch Straps
- Flatbed Winches
- Winch Bars
- Transport Chain
- Transport Chain Hooks
- Chain Binders
- D-Rings & Tie Down Anchors
- Cargo Bars, Load Bars & Shoring Beams
- Utility Strap Assemblies
- Safety Flags
- Oversize & Wide Load Signs
- Measuring Sticks
- Cargo Accessories
- DOT Placards & Labels
- HD Truck Accessories
- Ratchets & Hardware
- Rigging & Recovery Supply
- Auto & Truck Service
- Battery Service
- Winch Lines & Hardware
- Towing Accessories
- Lockout Tools
- Tow Lights
- Emergency & Warning Lighting
- Work & Truck Lighting
- Hoses & Reels
- Safety Supplies
- Winches
- Toolboxes & Storage
-
Truck Chassis Accessories
- Truck Chassis Accessories
- Push Bumpers, Guide Lights, & Hardware
- Cameras
- Seat Covers
- Alarms & Horns
- Wheel Simulators & Hub Parts
- Tire & Wheel Supply
- Fenders
- Mico Brake Locks
- Mud Flaps
- Push Bumpers, Guide Lights, & Hardware
- Sunvisors & Mirrors
- Spring & Suspension Enhancement
- Throttle Controls
- Running Boards
- Aftermarket Fuel Tanks
- Mobile Office Vehicle Mounts
- Hitches & Accessories
- Cab Protectors & Truck Racks
- Snow Removal, Dump Bodies, & Lift Gates
- Shop Supplies
- Car Hauler Trailer Supply
- Clearance Products
-
Shop Repair Parts
- Shop Repair Parts
- Car Hauler Trailer Parts
-
Car Carrier Parts
- Car Carrier Parts
- Wheel Lift L-Arms, Outer Crosstubes & Hardware
- Pivot Pin Kits
- Wear Pad Kits
- Control Assemblies & Hardware
- Cylinder & Pin Replacement
- Tail Light Assemblies & Wiring Harnesses
- Hydraulic Valve Bodies & Service Parts
- Car Carrier Winch Repair Parts
- Removable Side Rail Replacement
- Bed Lock Hardware & Tie-Down Anchors
- Carrier Light Pylons
- Carrier Body Lighting
-
Light Duty Wrecker Parts
- Light Duty Wrecker Parts
- WheelLift L-Arms, Receivers & Hardware
- Fender Flares & Fender Flares HD
- Boom End Sheaves, Guides, & Hardware
- Cylinder and Pin Replacement
- Control Hardware
- Control Valve Bodies & Hardware
- Hydraulic Pumps, Outriggers & Repair Parts
- Control Cables & Cable Springs
- Body Lighting
- Wrecker Light Pylons
-
Medium / Heavy Wrecker Parts
- Medium / Heavy Wrecker Parts
- WheelLift L-Arms, Crossbars, Receivers & Hardware HD
- Boom End Sheaves, Guides & Hardware HD
- Cylinder and Pin Replacement HD
- Control Valve Bodies & Hardware HD
- Cable Storage Springs HD
- Remote Controls HD & Control Cables HD
- Body Lighting HD
- Wrecker Light Pylons HD
- Hydraulic Outriggers & Repair Parts HD
- Zacklift Main Body Repair Parts
- Zacklift Inner Main Repair Parts
- Zacklift Horizontal Repair Parts
- Zacklift Grid Head Repair Parts
- Zacklift Mounts & Hardware
- Snow Plow Repair Parts
- Lighting
- Tow Dolly Parts
- Automotive Positioning Dolly Parts
- Hydraulic Hardware
- Electrical Hardware
- Wheel Simulator Repair Parts
- Diesel Emission Products
- Winch Repair Parts
- Toolbox Repair Parts
- Cable & Hose Management Repair Parts
-
Shop by Parts Schematics
Order Direct from a parts diagram
Looking for apparel? Shop Zip's Outfitters
0 Item(s)
You have no items in your shopping cart.
Customers who bought this item also bought
Chevron Wheel Retainer Arm, Wrecker, Driver Side, 2002 +
This is a wheel retainer arm, wrecker. It is a AG 2, second generation, driver.
This is for the driver side of the wrecker and it will fit models 2002 and
newer.
$744.99
Miller Wheel Lift Inner Boom, Chevron Renegade
This is a replacement wheel lift inner boom weldment for the chevron 408 light
duty wreckers by Miller Industries. This inner tube is used with the outer tube
and crossbar to lift a vehicle. To view the specific models this boom weldment
fits, see Features below. To view the part schematics, see the Brochure tab.
$1,543.99
Pin, Power Tilt Cylinder, Base End
This is a replacement pin. Power tilt cylinder, base end. It measures 1.48 x 8
1/8, integrated wrecker.
$158.99
Pin, Lower Boom Pivot
This is a pin, it is a lower boom pivot. This pin measures 1.48 x 10 1/8, iteg
wrkr.
$43.99
Miller Industries Pin-Outer Boom Pivot
Miller Industries provides a replacement pin-outer boom pivot.
$134.99
Pin, Power Tilt Cylinder, Shaft End
This is a pin. Power tilt cylinder, shaft end. It measures 1.48 x 7 3/8
integrated wrecker.
$110.99
Chevron Auto Grip Claw Cylinder, Left, 2nd Generation
Replacement Auto Grip Claw Cylinder for Chevron second generation 2003 and up.
Left hand claw cylinder.
$1,336.99
Miller Right Wheel Cylinder Retainer
This is a replacement auto grip claw cylinder for second generation auto grip
autoloaders, 2003 and up. Right hand claw cylinder. This is the cylinder that
moves your right wheel retainer on your wheel lift.
$1,336.99
Miller Control Handle, Pivot Base
This Pivot Base Straight Control Handle from Miller Industries is used on the 6
and 9 Spool Control Station of Century Generation II 16 Series LCG Car
Carriers. Please see the brochure tab for a list of breakdowns.
$17.09
Miller Composite Bell Crank
This Composite Bell Crank from Miller Industries is used on the 6 and 9 Spool
Control Station of Century Generation II LCG 16 Series Steel & Aluminum Car
Carriers. These carriers are made in 2014 or later. Please see the brochure tab
for a list of breakdowns.
$13.29
Miller Bolt, Allen, Socket Head, 3/8" x 1/2"
This 3/8" x 1/2" Socket Head Bolt from Miller Industries is used on the Auto
Grip II Components of Century and Vulcan Car Carriers. See the features below
for a list of car carriers and see the brochure tab for a list of breakdowns.
$5.49
Snap Ring, Internal, 2-1/2"
This 2-1/2" Internal Snap Ring is used on the Auto Grip II assembly of Century
and Vulcan Car Carriers Please see the features below for a list of carriers
and see the brochure tab for a breakdown.
$13.99
Miller Crossbar Pivot Pin
This is a replacement crossbar pivot pin by Miller Industries. This pivot pin
is used on the Autogrip II. This is the pin that connects the crossbar to the
wheel lift stinger and allows the crossbar to pivot.
$204.99
Chevron Wear Pad 1/2" x 2" x 3" Nylatron
This is an inner tube slide pad for the top side of the auto-grip wheel lift
option on the Century 12 & 16 Series LCG Generation II Car Carrier. Each pad
sold separately.
$16.89
Miller Screw-In Crossbar Plug, Auto L-Arm
This is a screw in plug for an auto l-arm crossbar from Miller Industries.
$4.59
Related products
Chevron Pin and Link Assembly
This Pin and Link Assembly from Miller Industries is used on the Control
Components Assembly of Chevron Car Carriers. These include 14, 16, 20 and 30
Series Car Carriers. Please see the features below for a list of trucks and see
the brochure tab for breakdowns.
$33.99
Miller 6.5" Thrust Washer Century / Challenger / Holmes
This 6.5" Thrust Washer from Miller Industries is used with a pivot pin in many
different Miller Wrecker assemblies. These assemblies include the boom, wheel
lift, crossbar, and underlift assemblies of Century, Challenger, and Holmes
Wreckers. Please see the brochure for a full list of breakdowns.
$12.99
Miller Inner Boom Bushing
This Bronze Bushing from Miller Industries is used on the Inner Boom of the
Wheel Lift Assembly of Champion Car Carriers made before 2001. This busing has
a 3" inner diameter. See the features below for a full list of carriers.
This part can be used to replace Part Numbers: 12-0301914 and 12-0301383.
$86.99
Handle Bracket
This is a handle bracket for Gresen V20 Valve. This piece bolts onto the valve
assembly itself and is use to hold the control rod linkage to the valve.
$39.99
Ramsey Seal Kit
This gasket and seal kit is for the H-200 series Ramsey winch with the " keyhole style " worm gear housing cover.
$73.99
Cable Tie, Black, 11.1"
Fastenal 11.1" 50 lbs. tensile UV black nylon 6.6 Power Phase cable tie.
Cable ties secure wire bundles, harnesses and components quickly without
slipping. Sold Each (Individually)
$0.19
Miller Grommet, Rubber, Century and Vulcan Wreckers
This Rubber Grommet from Miller Industries is used on the Body Assembly and Light Accessory Assemblies of Miller Wreckers. These include Century, Challenger, Holmes and Vulcan Wreckers. Please see the features below for a list of wreckers and see the brochure tab for breakdowns. This part can be used to replace Part Number FF-116.
$2.99
Washer, Flat 5/16" Stainless Steel 18-8
Fastenal 5/16" 18-8 stainless steel small OD flat washer.
$0.09
Miller Composite Bell Crank
This Composite Bell Crank from Miller Industries is used on the 6 and 9 Spool
Control Station of Century Generation II LCG 16 Series Steel & Aluminum Car
Carriers. These carriers are made in 2014 or later. Please see the brochure tab
for a list of breakdowns.
$13.29
Chevron Pin and Link Assembly
This Pin and Link Assembly from Miller Industries is used on the Control
Components Assembly of Chevron Car Carriers. These include 14, 16, 20 and 30
Series Car Carriers. Please see the features below for a list of trucks and see
the brochure tab for breakdowns.
$33.99
Miller 6.5" Thrust Washer Century / Challenger / Holmes
This 6.5" Thrust Washer from Miller Industries is used with a pivot pin in many
different Miller Wrecker assemblies. These assemblies include the boom, wheel
lift, crossbar, and underlift assemblies of Century, Challenger, and Holmes
Wreckers. Please see the brochure for a full list of breakdowns.
$12.99
Miller Inner Boom Bushing
This Bronze Bushing from Miller Industries is used on the Inner Boom of the
Wheel Lift Assembly of Champion Car Carriers made before 2001. This busing has
a 3" inner diameter. See the features below for a full list of carriers.
This part can be used to replace Part Numbers: 12-0301914 and 12-0301383.
$86.99
Handle Bracket
This is a handle bracket for Gresen V20 Valve. This piece bolts onto the valve
assembly itself and is use to hold the control rod linkage to the valve.
$39.99
Ramsey Seal Kit
This gasket and seal kit is for the H-200 series Ramsey winch with the " keyhole style " worm gear housing cover.
$73.99
Cable Tie, Black, 11.1"
Fastenal 11.1" 50 lbs. tensile UV black nylon 6.6 Power Phase cable tie.
Cable ties secure wire bundles, harnesses and components quickly without
slipping. Sold Each (Individually)
$0.19
Miller Grommet, Rubber, Century and Vulcan Wreckers
This Rubber Grommet from Miller Industries is used on the Body Assembly and Light Accessory Assemblies of Miller Wreckers. These include Century, Challenger, Holmes and Vulcan Wreckers. Please see the features below for a list of wreckers and see the brochure tab for breakdowns. This part can be used to replace Part Number FF-116.
$2.99
Washer, Flat 5/16" Stainless Steel 18-8
Fastenal 5/16" 18-8 stainless steel small OD flat washer.
$0.09
Miller Composite Bell Crank
This Composite Bell Crank from Miller Industries is used on the 6 and 9 Spool
Control Station of Century Generation II LCG 16 Series Steel & Aluminum Car
Carriers. These carriers are made in 2014 or later. Please see the brochure tab
for a list of breakdowns.
$13.29
Newsletter
Information
Product Support
Customer service
Copyright © 2025 Zip's. All Rights Reserved. Seller reserves the right to adjust prices or correct errors. Privacy Policy
