Chevron

This Composite Bell Crank from Miller Industries is used on the 6 and 9 Spool Control Station of Century Generation II LCG 16 Series Steel & Aluminum Car Carriers. These carriers are made in 2014 or later. Please see the brochure tab for a list of breakdowns.

This Pin and Link Assembly from Miller Industries is used on the Control Components Assembly of Chevron Car Carriers. These include 14, 16, 20 and 30 Series Car Carriers. Please see the features below for a list of trucks and see the brochure tab for breakdowns.

This is a handle bracket for Gresen V20 Valve. This piece bolts onto the valve assembly itself and is use to hold the control rod linkage to the valve.

Right hand thread composite clevis used on Chevrons.

This Pivot Base Straight Control Handle from Miller Industries is used on the 6 and 9 Spool Control Station of Century Generation II 16 Series LCG Car Carriers. Please see the brochure tab for a list of breakdowns.

This is a replacement body lock hold down bracket kit for the driver side of a Chevron Car Carrier. This kit includes the left hold down bracket, the roller bearing, the thrust washer, and a nylon lock nut. To view the models this hold down kit fits see Features below.

This is a replacement body lock hold down bracket kit for the passenger side of a Chevron Car Carrier. This kit includes the right hold down bracket, the roller bearing, the thrust washer, and a nylon lock nut. To view the models this hold down kit fits see Features below. To view the part schematics, see the Brochure tab.

Left hand thread composite clevis used on Chevrons.

This 3/8" x 1-1/8" Clevis Pin from Miller Industries is used on the 6 and 9 spool Control Station of Century LCG Generation II 16 Series Car Carriers. See the brochure tab for breakdowns.

L-arm, Right hand, Chevron with notched top. Fits the 15-65265L wheel grid.

This is a replacement cable tensioner combo spring. Replaces part number: SP8-A9018S.

Note: Special Handling Fees Apply

Composite handle.

This Black Knob from Chevron is used on several Chevron Wreckers. These include 408V, 408T, 512, and 1014 Wreckers. The knob has a threaded hole that can be twisted onto a screw or handle. Please see the features below for a list of wreckers and the brochure tab for breakdowns.

This is an inner tube slide pad for the top side of the auto-grip wheel lift option on the Century 12 & 16 Series LCG Generation II Car Carrier. Each pad sold separately.

This is a replacement 5" x 2.5" x 6" Chevron Wear Pad

This 2-1/2" Internal Snap Ring is used on the Auto Grip II assembly of Century and Vulcan Car Carriers Please see the features below for a list of carriers and see the brochure tab for a breakdown.

Note: Special Handling Fees Apply

Length Between Poles: 21"

This is a replacement Carrier Control Panel for the driver side.

This is a replacement pivot pin used on the wheel lift of your car carrier. This is the pin that connects your wheel lift crossbar to the wheel lift stinger.

This is a replacement winch top plate that is used on Chevron and Century Car Carriers by Miller Industries. This plate is used with Ramsey Winches.

Wheel Grid assembly, right hand, fits Chevron wheel lifts. Accepts 15-65250R L-arm.

This is a replacement outer wear pad. Measuring at 1/2in x 2in x 4 inches.

This is a replacement Carrier ID Control Panel on the passenger side.

Removable L-Arm Pan from Miller Industries that is used on Chevron Carriers.

This 3/8" x 1/2" Socket Head Bolt from Miller Industries is used on the Auto Grip II Components of Century and Vulcan Car Carriers. See the features below for a list of car carriers and see the brochure tab for a list of breakdowns.

This is an open rail with a removable side section. Middle, 17-30 ft bodies.

This is a side tool box door lanyard. Cable length: 18" Cable length End to End Including Clamps: 21.5". Wrecker shock mount taillite.

3/4 Plunger pin

This is a control rod weldment, driver. It measures 37 3/4 in.

This 3 Hose Kit from Chevron is used with a Wheel Lift In/Out Cylinder.

This 5/16" x 1" Bolt from Miller Industries is used on the Auto Grip II Component Assembly of Century and Vulcan Car Carriers. Please see the features below for a list of carriers and see the brochure tab for breakdowns.

This 1 Snap Ring from Miller Industries is used on the bed and frame assembly of several Miller Car Carriers. These include Century, Challenger, Champion, Holmes, and Vulcan carriers.

This filter is used in Chevron Carriers starting at October, 2005.

This is a replacement detent ball for the wheel lift on Century, Chevron and Vulcan Car Carriers and Chevron light duty wreckers by Miller Industries. This detent ball is used on 15 Series and 20 Series Century Carriers, Series 14, Series 16, and Series 20 Chevron Carriers, 10 Series and 15 Series Vulcan Carriers. This ball also fits on the Chevron 408 and Renegade wreckers. To view the specific models this detent ball fits see Features below. To view the part schematics, see the Brochure tab.

This is a screw in plug for an auto l-arm crossbar from Miller Industries.

Note: Special Handling Fees Apply Section seal kit (per section) K-6121 Spool seal kit (per spool) K-6035

This is a replacement auto grip claw cylinder for second generation auto grip autoloaders, 2003 and up. Right hand claw cylinder. This is the cylinder that moves your right wheel retainer on your wheel lift.

Replacement Auto Grip Claw Cylinder for Chevron second generation 2003 and up. Left hand claw cylinder.

This is a control handle, it is for a wrecker. It measures 7 3/4, and is a 408V.

This is a wheel retainer arm, wrecker. It is a AG 2, second generation, driver. This is for the passenger side of the wrecker and it will fit models 2002 and newer.

This is a wheel retainer arm, wrecker. It is a AG 2, second generation, driver. This is for the driver side of the wrecker and it will fit models 2002 and newer.

This is a 1/4" clevis pin.

This is an inner tube slide pad for the top side of the wheel lift on the Century 12 & 16 Series LCG Generation II Car Carrier. Each pad sold separately.

This is a replacement 58 link hose track for Century and Chevron car carriers by Miller Industries. This hose track will fit on the Century 16 Series LCG Generation II Carrier. This track also fits the Chevron Series 10 and Series 16 LCG Generation II Carriers. To view the specific models this hose track fits, see Features below. To view the part schematics cee the Brochure tab.

Note: Special Handling Fees Apply

Wear pad , 1/4" x 3" x 96" long

This is a replacement Side Puller Overlay decal for the driver side.

This is a replacement aluminum hood 6 hole Chevron crossrod.

This is a nut, 1/2, 20 unf plated.

This is a pin, 5/16 safety snap, holds carrier L-arm in holder.

This is a pin, xbar pvt, 2 in, staring 9/98.

This is a replacement Side Puller Overlay decal for the passenger side.

This is a replacement Yoke Leaf Spring for the wheel lift of your wrecker. Does not work with auto L-arms.

This is a replacement LCG bed extend cylinder seal kit.

This is a replacement wheel lift inner boom weldment for the chevron 408 light duty wreckers by Miller Industries. This inner tube is used with the outer tube and crossbar to lift a vehicle. To view the specific models this boom weldment fits, see Features below. To view the part schematics, see the Brochure tab.