Free shipping is only valid on total purchases of $199 or more and ground shipments within the contiguous 48 states for products weighing less than 150 lbs. Special handling fees may be required for some products.Shipping fees will be added for all orders under $199 or that include oversized items or any item of 150 lbs or more. Please contact customer service if you have any questions.
These Car Carrier Pylons are used with Miller Century, Champion, Challenger,
Holmes, and Vulcan Rollbacks. They fit 10, 12, 15, and 16 Series beds. These
deck mounted pylons come in a variety of heights from 38" to 68". Car Carrier
Pylons are commonly used as cab protectors. See application chart under the
brochures tab.
The pros know that you don't mess around when it comes to brakes. FVP Brake Cleaner meets or exceeds OE quality with a price so competitive it will stop you in your tracks. FVP Non-Chlorinated Brake Part Cleaner removes oil, grease, brake fluid and containments quickly, with no residue.
This waterproof Flood Light from Buyers Products has 6 white LEDs with a black
powder coated cast aluminum housing. This light is a 12-24 volt system with a
1.5 Amp draw that has an output of 1620 Lumens. Light comes with an adjustable
stainless steel stud mount. The dimensions for this flood light are 5.75" W x
2" T x 3" D and weights around 1.6 lbs.
LED Light Strips are ideal for compartment and cargo work spaces of trucks,
trailers, toolboxes, RV's and more. Space saving low profile design is 1/2"
wide and only 0.2" tall. Self adhesive backing for easy installation on any
surface. Includes clips and screws for alternate mounting. IP68 rated
completely sealed waterproof electronics. 12 volt DC.
Temflex vinyl insulating electrical tape. It is flame retardant, lead free,
cold and sunlight resistant, suitable for use at not more than 600V and not
more than 80?C (176?F).
These Galvanized Toolbox Mounting Bracket easily mounts toolboxes on
rollbacks or carriers. It is used for 20" or 24" deep underbody toolboxes on car
carrier beds. Sold as a pair.
This is a special toolbox mount that is used when the toolbox needs to be slid
forward to miss the leaf spring mounts. Still easily mount toolboxes on
rollbacks or carriers. Used for 18" X 18" toolboxes. Sold as each.
Fastenal 11.1" 50 lbs. tensile UV black nylon 6.6 Power Phase cable tie.
Cable ties secure wire bundles, harnesses and components quickly without
slipping. Sold Each (Individually)
Lodar Actus Electric Actuator for Hydraulic Valves. Kit Comes with a Lodar 2-6 Function Remote, Lodar Receiver, and an Actus Linear Actuator(s). For Example: This system will work with a single winch IN/OUT Functions. No Air Required. 12V power and ground needed for installation. Great when using a Ford F350/F450/F550 or Dodge 3500/4500/5500 Chassis since there are no on-board OEM
air compressors available. *NOTE: Is NOT compatible with any small wrecker with "cable" operated controls.
Phoenix electrical junction blocks are high-quality, easy-to-use terminal
blocks that allow you to connect multiple electrical sources in your car,
truck, trailer, or RV. They feature a two-piece design and are available with a
range of poles to accommodate a variety of wiring requirements. These blocks
ensure that your wires stay in place and don't contact other leads, keeping all
of your electrical devices organized and safe from short circuiting.
Make your recoveries easier with The RimSling! This synthetic rope sling is
designed slimmer yet has a higher . The RimSling has a protective Cordura
Sleeve over the entire sling giving it maximum protection. Also, it has a
special braid guard at the center of the sling providing extended life. A 6"
sling eye is located on either end of the sling. The RimSling is also Made in
the USA!
AmSteel-Blue Synthetic Rope is a proven alternative to steel cables and steel
winch lines. Size-for-size, AmSteel-Blue is the same strength as steel wire
rope - yet it floats! These 12-strand, single braid winch lines yield the
maximum in strength-to-weight ratio and are torque free. Meaning attachment
hardware with a swivel is not necessary. AmSteel-Blue has extremely limited
stretching - only 1% at full WLL (4:1). Also, AmSteel-Blue Rope has superior flex fatigue and
is abrasion resistant.
When compared to steel cables, AmSteel-Blue Winch Line Extensions are a fraction of the
weight. For example, a 3/4 " x 100' steel cable weighs 100 lbs while an
AmSteel-Blue rope with the same dimensions only weighs 13.3 lbs - almost 8
times lighter! Just think about how much easier the handling of the synthetic
Amsteel-Blue is for your operators verses a steel cable. Also, it drastically
cuts down on the overall weight of your truck - especially heavy duty rotator
wreckers which have up to 5 to 6 winches!
This is a front stop pin assembly for the scoop bracket weldment on Light Duty Vulcan Wreckers by Miller Industries. This stop pin w
ill fit the following models: Vulcan Modular 804, Modular 806, and Modular 880/890. It works for both sides of the wrecker. This par
t can be used to replace Part Numbers: 8621400 and 880411500.
This is a bronze bushing for an Eagle Best-Lift Forklift Attachment. This bushing is used where the claws of the forklift attachment mounts to the crossbar. You will need two, one for the driver side claw and one for the passenger side claw. The dimensions of this bushing are 3" long with a 1-1/4" outside diameter and a 1" inside diameter. This part can be used to replace Part Number E300002.
Also known as a wheel grid, slide bar, or receiver, this 3.5" Outer Cross Tube from Miller Industries is a complete right hand assembly with cam lock style plunger pins. This cross tube will fit 3.5" x 3.5" square tubes. It is used on the wheel lift and slide-in tire restraint assembly of Century, Champion, and Vulcan Car Carriers. Shop for the left hand version of this Cross Tube,
Also known as a wheel grid, slide bar, or receiver, this 3.5" Outer Cross Tube from Miller Industries is a complete left hand assembly with cam lock style plunger pins. This cross tube will fit 3.5" x 3.5" square tubes. It is used on the wheel lift and slide-in tire restraint assembly of Century, Champion, and Vulcan Car Carriers. Shop for the right hand version of this Cross Tube,
This is a replacement L-arm claw pivot pin weldment used on the wheel lift of
the Century Modular Midnight Express and the Holmes 220 Snatcher and 440SL
light duty wreckers by Miller Industries. This is the pin that allows the L-arm
to pivot on the crossbar which secures the tire of towed vehicle. To view the
part schematics please click on the Brochure tab above.
Note: Special Handling Fees Apply for Specific Items
This alloy pivot-style L-Arm from Miller Industries fits Formula 1 and Formula
6500 wheel lifts on Century 400 and 600 Series and Challenger 4700 and 4800
Series wreckers. Also known as a tire restraint or wheel retainer, this
aluminum L-Arm fits 2" x 3" outer crosstubes and features a scoop style tire
pan. The drivers side part can be used to replace Part Nos.: 12-0803648 and
12-0903489 and the passenger side part can be used to replace Part Nos.:
12-0803649 and 12-0903490.
Option of driver or passenger position
Fits 2" x 3" outer crosstubes
Pivot style receivers
Alloy construction
Scoop style tire pan
4,000-lb. capacity
Driver side (12-0904156) replaces Part Nos.: 12-0803648 and 12-0903489
Passenger side (12-0904157) replaces Part Nos.: 12-0803649 and 12-0903490
This Wheel Grid Assembly from Miller Industries is a right hand assembly that fits 3.5" x 3.5" square tubes. The wheel grid has a Vu
lcan patented strapless system that is used on the Crossbar and Outer Crosstube Assembly of Vulcan 804, 806, 870, and 880 wheel lift
s, as well as Vulcan Car Carriers. This wheel grid accepts L-Arm 8700180. Click here for the left hand version of this wheel grid 8800800.
This zinc-plated slide-in L-Arm fits the wheel lifts on various
models of Century, Holmes and Challenger wreckers and Century, Champion,
Challenger and Vulcan car carriers.
Note: Special Handling Fees Apply for Specific Items
This zinc-plated mild steel L-Arm from Miller Industries fits the Vulcan 10
Series car carriers and 800 Series light-duty wheel lifts with option of driver
or passenger side fit. Sometimes called a tire restraint or wheel retainer, the
2 x 2.5 tube is designed to work with the driver side outer crosstube 8800900.
This strapless system offers a Working Load Limit of 4,000 lbs. This scoop also
features adjustment holes for proper tire fitment and a grated pan for improved
grip.
2 x 2.5 aluminum tube
Opton of driver or passenger positioning
Adjustment holes
Grated scoop tire pan
Use with 8800900 outer crosstube
WLL: 4,000 lbs.
Fits:
2003-Current Vulcan 10 Series Steel & Aluminum Carriers
2001-Current Vulcan 10 Series Extreme Angle Steel Carriers
Replacement pivot lock pin with attachment cable for Century new style "Pivot-L" wheel grids. This part can be used to replace Part Numbers: 12-0714415 and 12-0904140.
Note: Special Handling Fees Apply for Specific Items
This painted steel L-Arm from Miller Industries fits the wheel lifts on various
models of Century, Holmes and Vulcan wreckers. Otherwise known as a tire
restraint or wheel retainer, this L-Arm fits the crosstubes on the driver side.
This part can be used to replace Driver Side Part Nos. 12-00803911 and
12-0803911 & Passenger Side Part Nos.12-00803912 and 12-0803912.
Option of driver or passenger position
Painted steel
Driver side (12-0806978) replaces driver side Part Nos. 12-00803911 and
12-0803911
This is a front stop pin assembly for the scoop bracket weldment on Light Duty Vulcan Wreckers by Miller Industries. This stop pin w
ill fit the following models: Vulcan Modular 804, Modular 806, and Modular 880/890. It works for both sides of the wrecker. This par
t can be used to replace Part Numbers: 8621400 and 880411500.
This is a bronze bushing for an Eagle Best-Lift Forklift Attachment. This bushing is used where the claws of the forklift attachment mounts to the crossbar. You will need two, one for the driver side claw and one for the passenger side claw. The dimensions of this bushing are 3" long with a 1-1/4" outside diameter and a 1" inside diameter. This part can be used to replace Part Number E300002.
Also known as a wheel grid, slide bar, or receiver, this 3.5" Outer Cross Tube from Miller Industries is a complete right hand assembly with cam lock style plunger pins. This cross tube will fit 3.5" x 3.5" square tubes. It is used on the wheel lift and slide-in tire restraint assembly of Century, Champion, and Vulcan Car Carriers. Shop for the left hand version of this Cross Tube,
Also known as a wheel grid, slide bar, or receiver, this 3.5" Outer Cross Tube from Miller Industries is a complete left hand assembly with cam lock style plunger pins. This cross tube will fit 3.5" x 3.5" square tubes. It is used on the wheel lift and slide-in tire restraint assembly of Century, Champion, and Vulcan Car Carriers. Shop for the right hand version of this Cross Tube,
This is a replacement L-arm claw pivot pin weldment used on the wheel lift of
the Century Modular Midnight Express and the Holmes 220 Snatcher and 440SL
light duty wreckers by Miller Industries. This is the pin that allows the L-arm
to pivot on the crossbar which secures the tire of towed vehicle. To view the
part schematics please click on the Brochure tab above.
Note: Special Handling Fees Apply for Specific Items
This alloy pivot-style L-Arm from Miller Industries fits Formula 1 and Formula
6500 wheel lifts on Century 400 and 600 Series and Challenger 4700 and 4800
Series wreckers. Also known as a tire restraint or wheel retainer, this
aluminum L-Arm fits 2" x 3" outer crosstubes and features a scoop style tire
pan. The drivers side part can be used to replace Part Nos.: 12-0803648 and
12-0903489 and the passenger side part can be used to replace Part Nos.:
12-0803649 and 12-0903490.
Option of driver or passenger position
Fits 2" x 3" outer crosstubes
Pivot style receivers
Alloy construction
Scoop style tire pan
4,000-lb. capacity
Driver side (12-0904156) replaces Part Nos.: 12-0803648 and 12-0903489
Passenger side (12-0904157) replaces Part Nos.: 12-0803649 and 12-0903490
This Wheel Grid Assembly from Miller Industries is a right hand assembly that fits 3.5" x 3.5" square tubes. The wheel grid has a Vu
lcan patented strapless system that is used on the Crossbar and Outer Crosstube Assembly of Vulcan 804, 806, 870, and 880 wheel lift
s, as well as Vulcan Car Carriers. This wheel grid accepts L-Arm 8700180. Click here for the left hand version of this wheel grid 8800800.
This zinc-plated slide-in L-Arm fits the wheel lifts on various
models of Century, Holmes and Challenger wreckers and Century, Champion,
Challenger and Vulcan car carriers.
Note: Special Handling Fees Apply for Specific Items
This zinc-plated mild steel L-Arm from Miller Industries fits the Vulcan 10
Series car carriers and 800 Series light-duty wheel lifts with option of driver
or passenger side fit. Sometimes called a tire restraint or wheel retainer, the
2 x 2.5 tube is designed to work with the driver side outer crosstube 8800900.
This strapless system offers a Working Load Limit of 4,000 lbs. This scoop also
features adjustment holes for proper tire fitment and a grated pan for improved
grip.
2 x 2.5 aluminum tube
Opton of driver or passenger positioning
Adjustment holes
Grated scoop tire pan
Use with 8800900 outer crosstube
WLL: 4,000 lbs.
Fits:
2003-Current Vulcan 10 Series Steel & Aluminum Carriers
2001-Current Vulcan 10 Series Extreme Angle Steel Carriers
Replacement pivot lock pin with attachment cable for Century new style "Pivot-L" wheel grids. This part can be used to replace Part Numbers: 12-0714415 and 12-0904140.
Note: Special Handling Fees Apply for Specific Items
This painted steel L-Arm from Miller Industries fits the wheel lifts on various
models of Century, Holmes and Vulcan wreckers. Otherwise known as a tire
restraint or wheel retainer, this L-Arm fits the crosstubes on the driver side.
This part can be used to replace Driver Side Part Nos. 12-00803911 and
12-0803911 & Passenger Side Part Nos.12-00803912 and 12-0803912.
Option of driver or passenger position
Painted steel
Driver side (12-0806978) replaces driver side Part Nos. 12-00803911 and
12-0803911