Free shipping is only valid on total purchases of $199 or more and ground shipments within the contiguous 48 states for products weighing less than 150 lbs. Special handling fees may be required for some products.Shipping fees will be added for all orders under $199 or that include oversized items or any item of 150 lbs or more. Please contact customer service if you have any questions.
Zip's 12 piece round sling kit. This kit features 12 slings of various lengths
and ratings to meet your needs. Complete this kit with the 124002706Z screw pin
shackle kit.
Temflex vinyl insulating electrical tape. It is flame retardant, lead free,
cold and sunlight resistant, suitable for use at not more than 600V and not
more than 80?C (176?F).
The solid state flange assembly will be made of a grey polycarbonate then
incased in a chrome plated finish or a black finish. The M6FC and the M6FB
shall have the ability to surface mount any M6 Super-LED series warning lights.
The M6 series warning light is sold separately.
These lights have a unique lens shape and patented Linear-LED's designed
reflector assembly, M Series lightheads are completely illuminated for
unmatched high intensity warning and low current consumption. These are single
color LED lightheads offered with either a colored or clear lens.
The 124002634 Lift Eye Attachment is designed for front lifts on many models of the RTS, GMC, and NOVA buses and rear picks on the MCI-9. The rear eye on an MCI ,GL, and GL3 series can be utilized for a rear pick. The eyelet that is bolted on to the jack pad point on many RTS, GMC, and NOVA buses is pinned into the lift eye attachment for a front pick.
Fastenal 11.1" 50 lbs. tensile UV black nylon 6.6 Power Phase cable tie.
Cable ties secure wire bundles, harnesses and components quickly without
slipping. Sold Each (Individually)
Phoenix electrical junction blocks are high-quality, easy-to-use terminal
blocks that allow you to connect multiple electrical sources in your car,
truck, trailer, or RV. They feature a two-piece design and are available with a
range of poles to accommodate a variety of wiring requirements. These blocks
ensure that your wires stay in place and don't contact other leads, keeping all
of your electrical devices organized and safe from short circuiting.
The 420 Champion Series snatch blocks from McKissick are perfect for heavy duty rigging
operations because they greatly improve your winches function and pulling
power. The hooks and side plates are made from forged alloy steel that is also
heat treated. This makes the blocks exceptionally durable while keeping them as
light as possible. Each of these sizes will fit a 3/4" - 7/8" wireline. The
opening feature permits the insertion of a rope line while the block is
suspended from a gin-pole. The side plates on these snatch blocks have been
designed to eliminate the possibility of a rope jamming.
Tork Advanced ShopMax Wiper 450 Center-feed shop towels are highly absorbent, offering excellent wipe-dry capabilities. Their strong construction offers durability and the self-dispensing pop-up box offers controlled dispensing. They contain 85% paper content (60% recycled, 40% postindustrial) and 15% synthetic emulsion. Sold in a box of 200.
Premium quality primary wire cable manufactured to meet or exceed ATA
specifications. Color coded PVC cover resists weather and protects the
individual color coded, annealed copper conductor strands. Commonly used to
install or repair marker/ID light circuits.
Premium quality trailer wire cable manufactured to meet or exceed ATA & SAE
specifications. Neoprene insulation resists all weather and protects the
individual color coded, annealed copper conductor strands. Commonly used for
trailer wiring or repair.
Tork low-lint cleaning cloth is a disposable cloth used for cleaning applications. The multipurpose cloths are made from 100% synthetic fibers making them low-lint producing and flexible. They are versatile cloths that can be used with detergents and chemical solvents and come in a convenient popup box.
Rubber grommets help eliminate risk of wire, cord or hose chaffing on
applications due to metal drill holes or cutouts. Each rubber grommet is
flexible and allows for simple installation by easily snapping the rubber
grommet directly into the drill hole. Effective and easy to use rubber grommets
ensure your wiring projects and applications are protected and last longer.
This is a Cargo Light with Adjustable Reflector Hood by Maxxima, for interior
use only. Maxxima's super bright cargo lights have a high LED count and high
lumen output making them the perfect choice to light the interior of your rig.
These LED Interior Dome Lights are fully sealed electronics are moisture,
vibration, and corrosion proof. Impact resistant polycarbonate lens and
housing.
This is a 14 LED 3" x 6" Interior Compartment Light by Maxxima. It is 2 hole
surface mounted and uses a 2 wire connection. Maxxima's new and improved
compartment light is perfect for overhead cab or other interior lighting. The
refrigeration-safe design and the super bright LED output make it the most
durable and versatile choice on the market.
This is a 2,000 Super High Lumen LED Interior Cargo Light by Maxxima. It is
surface mounted with 2 blunt cut leads for connection. Maxxima's super bright
rectangular cargo light features 144 LEDs with a frosted lens to provide smooth
even light output in bright cool white color.
This is a 6" LED Dome Light with 42 LEDs by Maxxima. This light has an output
of 1400 lumens. This light features a three hole surface mount light. This
light also features a polycarbonate lens and housing and is backed by a 5 year
warranty.
These LED Dome Lights are fully sealed electronics and vibration-, corrosion-
and moisture-proof. Lights feature impact-resistant polycarbonate lens and
housing. Include three-hole surface mount with 3/16" dia. holes and screws for
easy installation. Options: Hardwire Dome Light with 15 LEDs measures 3" dia. x
.3"D and has a .25A draw. PIR Sensor Dome Light with 42 LEDs measures 6.5" dia.
x 1"D and has a .95A draw. On/Off Switch Dome Light with 42 LEDs measures 6.5"
dia. x 1"D and has a .95A draw.
Cool, white light for maximum illumination. LEDs strips provide years of reliable interior lighting for illuminating compartments an
d work spaces. Three wire connector is 7"L.
This LED strip lighting is a self-adhesive utilizing 3M high-bond tape with wire leads at both ends allowing multiple units to be co
nnected. It is spliceable every 3 LEDs.
LED Light Strips are ideal for compartment and cargo work spaces of trucks,
trailers, toolboxes, RV's and more. Space saving low profile design is 1/2"
wide and only 0.2" tall. Self adhesive backing for easy installation on any
surface. Includes clips and screws for alternate mounting. IP68 rated
completely sealed waterproof electronics. 12 volt DC.
The New MLS Series of LED interior lighting offers excellent illumination for
cabs, compartment, cargo and work spaces. With easy to install self adhesive
backing. Maxxima MLS Strips can be applied to any clean surface. Available in a
variety of lengths and five colors. The MLS Series will provide reliable
interior lighting with ultra low amp draw, long LED life & moisture proof
construction.
The MSLS series of silicone LED interior strip lists offer unparelled
flexibility when applied to tight radiuses. All while providing excellent
illumination for cabs, compartments, cargo and work spaces. They come with easy
to install self adhesive backing and can be applied to any clean surface. The
MSLS series will provide reliable interior/exterior lighting with a ultra low
amp draw, long LED life and moisture proof construction.
This light has been the standard toolbox lighting for Century and Vulcan
Heavy Duty units for over a year and offer superior lighting over the previous
lights. This light offers "plug and play" bullet connectors so they will
connect to the original light harness.
This hard-wired interior dome light from Maxxima features an impact-resistant
polycarbonate lens and housing. The fully-sealed electronics are vibration-,
corrosion- and moisture-proof. Screws included for three-hole surface mount
with 3/16"-dia. holes.
LED 90 Degree Corner Mount Strip Light-Glossy white powder coated aluminum
housing with a polycarbonate lens. The housing design allows for clean wire
management behind the light.
This is a Cargo Light with Adjustable Reflector Hood by Maxxima, for interior
use only. Maxxima's super bright cargo lights have a high LED count and high
lumen output making them the perfect choice to light the interior of your rig.
These LED Interior Dome Lights are fully sealed electronics are moisture,
vibration, and corrosion proof. Impact resistant polycarbonate lens and
housing.
This is a 14 LED 3" x 6" Interior Compartment Light by Maxxima. It is 2 hole
surface mounted and uses a 2 wire connection. Maxxima's new and improved
compartment light is perfect for overhead cab or other interior lighting. The
refrigeration-safe design and the super bright LED output make it the most
durable and versatile choice on the market.
This is a 2,000 Super High Lumen LED Interior Cargo Light by Maxxima. It is
surface mounted with 2 blunt cut leads for connection. Maxxima's super bright
rectangular cargo light features 144 LEDs with a frosted lens to provide smooth
even light output in bright cool white color.
This is a 6" LED Dome Light with 42 LEDs by Maxxima. This light has an output
of 1400 lumens. This light features a three hole surface mount light. This
light also features a polycarbonate lens and housing and is backed by a 5 year
warranty.
These LED Dome Lights are fully sealed electronics and vibration-, corrosion-
and moisture-proof. Lights feature impact-resistant polycarbonate lens and
housing. Include three-hole surface mount with 3/16" dia. holes and screws for
easy installation. Options: Hardwire Dome Light with 15 LEDs measures 3" dia. x
.3"D and has a .25A draw. PIR Sensor Dome Light with 42 LEDs measures 6.5" dia.
x 1"D and has a .95A draw. On/Off Switch Dome Light with 42 LEDs measures 6.5"
dia. x 1"D and has a .95A draw.
Cool, white light for maximum illumination. LEDs strips provide years of reliable interior lighting for illuminating compartments an
d work spaces. Three wire connector is 7"L.
This LED strip lighting is a self-adhesive utilizing 3M high-bond tape with wire leads at both ends allowing multiple units to be co
nnected. It is spliceable every 3 LEDs.
LED Light Strips are ideal for compartment and cargo work spaces of trucks,
trailers, toolboxes, RV's and more. Space saving low profile design is 1/2"
wide and only 0.2" tall. Self adhesive backing for easy installation on any
surface. Includes clips and screws for alternate mounting. IP68 rated
completely sealed waterproof electronics. 12 volt DC.
The New MLS Series of LED interior lighting offers excellent illumination for
cabs, compartment, cargo and work spaces. With easy to install self adhesive
backing. Maxxima MLS Strips can be applied to any clean surface. Available in a
variety of lengths and five colors. The MLS Series will provide reliable
interior lighting with ultra low amp draw, long LED life & moisture proof
construction.
The MSLS series of silicone LED interior strip lists offer unparelled
flexibility when applied to tight radiuses. All while providing excellent
illumination for cabs, compartments, cargo and work spaces. They come with easy
to install self adhesive backing and can be applied to any clean surface. The
MSLS series will provide reliable interior/exterior lighting with a ultra low
amp draw, long LED life and moisture proof construction.
This light has been the standard toolbox lighting for Century and Vulcan
Heavy Duty units for over a year and offer superior lighting over the previous
lights. This light offers "plug and play" bullet connectors so they will
connect to the original light harness.
This hard-wired interior dome light from Maxxima features an impact-resistant
polycarbonate lens and housing. The fully-sealed electronics are vibration-,
corrosion- and moisture-proof. Screws included for three-hole surface mount
with 3/16"-dia. holes.
LED 90 Degree Corner Mount Strip Light-Glossy white powder coated aluminum
housing with a polycarbonate lens. The housing design allows for clean wire
management behind the light.