0 Item(s)
You have no items in your shopping cart.
Customers who bought this item also bought
Miller Thrust Washer, 5.5" Diameter
This Thrust Washer from Miller Industries is used in the wheel lift assembly of
Century 20 Series Car Carriers and Challenger 4800 Series Wreckers. The thrust
washer measures 5-1/2" diameter, 1" width, and 1/16" thick. Please see the
brochure tab for a list of breakdowns.
$41.99
Miller Pivot Pin Bushing
This Pivot Pin Bushing from Miller Industries is used in the wheel lift
assembly of Century 20 Series Car Carriers and Challenger 4800 Series Wreckers.
The bushing is used with a pivot pin and goes on the inner boom weldment during
assembly.
$150.99
Miller Detent Ball, 1-3/16"
This 1-3/16" steel Detent Ball from Miller Industries is used on the assembly
of Century Car Carriers and Wreckers.
$14.69
Related products
Vulcan Front Crosstube 3.5" Stop Pin Assembly
This is a front stop pin assembly for the scoop bracket weldment on Light Duty Vulcan Wreckers by Miller Industries. This stop pin w
ill fit the following models: Vulcan Modular 804, Modular 806, and Modular 880/890. It works for both sides of the wrecker. This par
t can be used to replace Part Numbers: 8621400 and 880411500.
$37.99
Eagle Wheel Lift Attachment Bronze Bushing
This is a bronze bushing for an Eagle Best-Lift Forklift Attachment. This bushing is used where the claws of the forklift attachment mounts to the crossbar. You will need two, one for the driver side claw and one for the passenger side claw. The dimensions of this bushing are 3" long with a 1-1/4" outside diameter and a 1" inside diameter. This part can be used to replace Part Number E300002.
$22.41
Century / Champion / Vulcan / LCG Right Crosstube 3.5"
Also known as a wheel grid, slide bar, or receiver, this 3.5" Outer Cross Tube from Miller Industries is a complete right hand assembly with cam lock style plunger pins. This cross tube will fit 3.5" x 3.5" square tubes. It is used on the wheel lift and slide-in tire restraint assembly of Century, Champion, and Vulcan Car Carriers. Shop for the left hand version of this Cross Tube,
$417.99
Wheel Lift Crossbar Plate Century 300 Series Holmes 440SL and Vulcan 807
This is a centering crossbar plate for wheel lift on the Vulcan 807, Century
300, and Holmes 440SL Series by Miller Industries.
$139.99
Century / Champion / Vulcan / LCG Left 3.5"
Also known as a wheel grid, slide bar, or receiver, this 3.5" Outer Cross Tube from Miller Industries is a complete left hand assembly with cam lock style plunger pins. This cross tube will fit 3.5" x 3.5" square tubes. It is used on the wheel lift and slide-in tire restraint assembly of Century, Champion, and Vulcan Car Carriers. Shop for the right hand version of this Cross Tube,
$417.99
Miller L-Arm Claw Pivot Pin Weldment Century Modular Midnight Express and Holmes 220 / 440SL
This is a replacement L-arm claw pivot pin weldment used on the wheel lift of
the Century Modular Midnight Express and the Holmes 220 Snatcher and 440SL
light duty wreckers by Miller Industries. This is the pin that allows the L-arm
to pivot on the crossbar which secures the tire of towed vehicle. To view the
part schematics please click on the Brochure tab above.
$92.99
Miller Pivot-Style Wheel Lift L-Arm - Formula 1 and 6500 Wheel Lifts
Note: Special Handling Fees Apply for Specific Items
This alloy pivot-style L-Arm from Miller Industries fits Formula 1 and Formula 6500 wheel lifts on Century 400 and 600 Series and Challenger 4700 and 4800 Series wreckers. Also known as a tire restraint or wheel retainer, this aluminum L-Arm fits 2" x 3" outer crosstubes and features a scoop style tire pan. The drivers side part can be used to replace Part Nos.: 12-0803648 and 12-0903489 and the passenger side part can be used to replace Part Nos.: 12-0803649 and 12-0903490.
This alloy pivot-style L-Arm from Miller Industries fits Formula 1 and Formula 6500 wheel lifts on Century 400 and 600 Series and Challenger 4700 and 4800 Series wreckers. Also known as a tire restraint or wheel retainer, this aluminum L-Arm fits 2" x 3" outer crosstubes and features a scoop style tire pan. The drivers side part can be used to replace Part Nos.: 12-0803648 and 12-0903489 and the passenger side part can be used to replace Part Nos.: 12-0803649 and 12-0903490.
- Option of driver or passenger position
- Fits 2" x 3" outer crosstubes
- Pivot style receivers
- Alloy construction
- Scoop style tire pan
- 4,000-lb. capacity
- Driver side (12-0904156) replaces Part Nos.: 12-0803648 and 12-0903489
- Passenger side (12-0904157) replaces Part Nos.: 12-0803649 and 12-0903490
Fits: - Century 400 Series
- Century 600 Series
- Challenger 4700 Series
- Challenger 4800 Series
$540.99
Vulcan 800 Series and Carriers - Grid Right 3.5"
Note: Special Handling Fees Apply
This Wheel Grid Assembly from Miller Industries is a right hand assembly that fits 3.5" x 3.5" square tubes. The wheel grid has a Vu lcan patented strapless system that is used on the Crossbar and Outer Crosstube Assembly of Vulcan 804, 806, 870, and 880 wheel lift s, as well as Vulcan Car Carriers. This wheel grid accepts L-Arm 8700180. Click here for the left hand version of this wheel grid 8800800.
This Wheel Grid Assembly from Miller Industries is a right hand assembly that fits 3.5" x 3.5" square tubes. The wheel grid has a Vu lcan patented strapless system that is used on the Crossbar and Outer Crosstube Assembly of Vulcan 804, 806, 870, and 880 wheel lift s, as well as Vulcan Car Carriers. This wheel grid accepts L-Arm 8700180. Click here for the left hand version of this wheel grid 8800800.
$773.99
Miller 2" Wheel Lift L-Arm - Century, Champion, Challenger and Vulcan Carriers
This zinc-plated slide-in L-Arm fits the wheel lifts on various
models of Century, Holmes and Challenger wreckers and Century, Champion,
Challenger and Vulcan car carriers.
$209.99
Miller Wheel Lift L-Arms - Vulcan 10 Series Carriers and 800 Series LD Wheel Lifts
Note: Special Handling Fees Apply for Specific Items
This zinc-plated mild steel L-Arm from Miller Industries fits the Vulcan 10 Series car carriers and 800 Series light-duty wheel lifts with option of driver or passenger side fit. Sometimes called a tire restraint or wheel retainer, the 2 x 2.5 tube is designed to work with the driver side outer crosstube 8800900. This strapless system offers a Working Load Limit of 4,000 lbs. This scoop also features adjustment holes for proper tire fitment and a grated pan for improved grip.
This zinc-plated mild steel L-Arm from Miller Industries fits the Vulcan 10 Series car carriers and 800 Series light-duty wheel lifts with option of driver or passenger side fit. Sometimes called a tire restraint or wheel retainer, the 2 x 2.5 tube is designed to work with the driver side outer crosstube 8800900. This strapless system offers a Working Load Limit of 4,000 lbs. This scoop also features adjustment holes for proper tire fitment and a grated pan for improved grip.
- 2 x 2.5 aluminum tube
- Opton of driver or passenger positioning
- Adjustment holes
- Grated scoop tire pan
- Use with 8800900 outer crosstube
- WLL: 4,000 lbs.
Fits: - 2003-Current Vulcan 10 Series Steel & Aluminum Carriers
- 2001-Current Vulcan 10 Series Extreme Angle Steel Carriers
- 2010-Current Vulcan Modular 804 Wreckers
- 2010-Current Vulcan Modular 806 Wreckers
- 2008-Current Vulcan Modular 880/890 Wreckers
- 2002-Current Vulcan 805 Wreckers
- 2000-Current Vulcan 806 Wreckers
- 1999-Current Vulcan 880/890 Wreckers
$258.99
All-Grip Chevron Style T Handle Pin
This is a Chevron T-handle pin. Choose from three size options: 5/8" X 3" reach, 3/4" X 3-1/2" reach, & 3/4" X 6" reach
$35.99
–
$54.99
B/A Products T Handle Pin 5/8"
This 5/8" diameter Pin comes with a t-handle and release button. It's for
Chevron L-Arm and fits Chevron 408 and Car Carrier wheel grids.
$46.99
Miller Replacement L-Arm Pin Assembly
Replacement pivot lock pin with attachment cable for Century new style "Pivot-L" wheel grids. This part can be used to replace Part Numbers: 12-0714415 and 12-0904140.
$14.89
Miller Steel Wheel Lift L-Arm - Century, Holmes and Vulcan Wreckers
Note: Special Handling Fees Apply for Specific Items
This painted steel L-Arm from Miller Industries fits the wheel lifts on various models of Century, Holmes and Vulcan wreckers. Otherwise known as a tire restraint or wheel retainer, this L-Arm fits the crosstubes on the driver side. This part can be used to replace Driver Side Part Nos. 12-00803911 and 12-0803911 & Passenger Side Part Nos.12-00803912 and 12-0803912.
This painted steel L-Arm from Miller Industries fits the wheel lifts on various models of Century, Holmes and Vulcan wreckers. Otherwise known as a tire restraint or wheel retainer, this L-Arm fits the crosstubes on the driver side. This part can be used to replace Driver Side Part Nos. 12-00803911 and 12-0803911 & Passenger Side Part Nos.12-00803912 and 12-0803912.
- Option of driver or passenger position
- Painted steel
- Driver side (12-0806978) replaces driver side Part Nos. 12-00803911 and
12-0803911
Fits: - 2010 - Current Century Modular Midnight Express
- 2000 - Current Century Midnight Express
- 2007 - Current Century Express 300 Series Modular
- 2009 - Current Holmes 440SL
- 2007 - Current Vulcan Modular 807
- 2000 - Current Vulcan 810 Intruder
$635.99
Miller Rubber Stop Century 300 Series and Vulcan 807 / 810
This Rubber Stop from Miller Industries is used on the boom assembly of Vulcan
810 Intruders, Vulcan 807R and Century 301, 301M, 311 and 312 Wreckers.
$40.99
Miller Eagle Claw Spring Kit
Spring set for Eagle wheel lifts. This part is used to replace Part Number
AWS-1010-A.
$41.99
Vulcan Front Crosstube 3.5" Stop Pin Assembly
This is a front stop pin assembly for the scoop bracket weldment on Light Duty Vulcan Wreckers by Miller Industries. This stop pin w
ill fit the following models: Vulcan Modular 804, Modular 806, and Modular 880/890. It works for both sides of the wrecker. This par
t can be used to replace Part Numbers: 8621400 and 880411500.
$37.99
Eagle Wheel Lift Attachment Bronze Bushing
This is a bronze bushing for an Eagle Best-Lift Forklift Attachment. This bushing is used where the claws of the forklift attachment mounts to the crossbar. You will need two, one for the driver side claw and one for the passenger side claw. The dimensions of this bushing are 3" long with a 1-1/4" outside diameter and a 1" inside diameter. This part can be used to replace Part Number E300002.
$22.41
Century / Champion / Vulcan / LCG Right Crosstube 3.5"
Also known as a wheel grid, slide bar, or receiver, this 3.5" Outer Cross Tube from Miller Industries is a complete right hand assembly with cam lock style plunger pins. This cross tube will fit 3.5" x 3.5" square tubes. It is used on the wheel lift and slide-in tire restraint assembly of Century, Champion, and Vulcan Car Carriers. Shop for the left hand version of this Cross Tube,
$417.99
Wheel Lift Crossbar Plate Century 300 Series Holmes 440SL and Vulcan 807
This is a centering crossbar plate for wheel lift on the Vulcan 807, Century
300, and Holmes 440SL Series by Miller Industries.
$139.99
Century / Champion / Vulcan / LCG Left 3.5"
Also known as a wheel grid, slide bar, or receiver, this 3.5" Outer Cross Tube from Miller Industries is a complete left hand assembly with cam lock style plunger pins. This cross tube will fit 3.5" x 3.5" square tubes. It is used on the wheel lift and slide-in tire restraint assembly of Century, Champion, and Vulcan Car Carriers. Shop for the right hand version of this Cross Tube,
$417.99
Miller L-Arm Claw Pivot Pin Weldment Century Modular Midnight Express and Holmes 220 / 440SL
This is a replacement L-arm claw pivot pin weldment used on the wheel lift of
the Century Modular Midnight Express and the Holmes 220 Snatcher and 440SL
light duty wreckers by Miller Industries. This is the pin that allows the L-arm
to pivot on the crossbar which secures the tire of towed vehicle. To view the
part schematics please click on the Brochure tab above.
$92.99
Miller Pivot-Style Wheel Lift L-Arm - Formula 1 and 6500 Wheel Lifts
Note: Special Handling Fees Apply for Specific Items
This alloy pivot-style L-Arm from Miller Industries fits Formula 1 and Formula 6500 wheel lifts on Century 400 and 600 Series and Challenger 4700 and 4800 Series wreckers. Also known as a tire restraint or wheel retainer, this aluminum L-Arm fits 2" x 3" outer crosstubes and features a scoop style tire pan. The drivers side part can be used to replace Part Nos.: 12-0803648 and 12-0903489 and the passenger side part can be used to replace Part Nos.: 12-0803649 and 12-0903490.
This alloy pivot-style L-Arm from Miller Industries fits Formula 1 and Formula 6500 wheel lifts on Century 400 and 600 Series and Challenger 4700 and 4800 Series wreckers. Also known as a tire restraint or wheel retainer, this aluminum L-Arm fits 2" x 3" outer crosstubes and features a scoop style tire pan. The drivers side part can be used to replace Part Nos.: 12-0803648 and 12-0903489 and the passenger side part can be used to replace Part Nos.: 12-0803649 and 12-0903490.
- Option of driver or passenger position
- Fits 2" x 3" outer crosstubes
- Pivot style receivers
- Alloy construction
- Scoop style tire pan
- 4,000-lb. capacity
- Driver side (12-0904156) replaces Part Nos.: 12-0803648 and 12-0903489
- Passenger side (12-0904157) replaces Part Nos.: 12-0803649 and 12-0903490
Fits: - Century 400 Series
- Century 600 Series
- Challenger 4700 Series
- Challenger 4800 Series
$540.99
Vulcan 800 Series and Carriers - Grid Right 3.5"
Note: Special Handling Fees Apply
This Wheel Grid Assembly from Miller Industries is a right hand assembly that fits 3.5" x 3.5" square tubes. The wheel grid has a Vu lcan patented strapless system that is used on the Crossbar and Outer Crosstube Assembly of Vulcan 804, 806, 870, and 880 wheel lift s, as well as Vulcan Car Carriers. This wheel grid accepts L-Arm 8700180. Click here for the left hand version of this wheel grid 8800800.
This Wheel Grid Assembly from Miller Industries is a right hand assembly that fits 3.5" x 3.5" square tubes. The wheel grid has a Vu lcan patented strapless system that is used on the Crossbar and Outer Crosstube Assembly of Vulcan 804, 806, 870, and 880 wheel lift s, as well as Vulcan Car Carriers. This wheel grid accepts L-Arm 8700180. Click here for the left hand version of this wheel grid 8800800.
$773.99
Miller 2" Wheel Lift L-Arm - Century, Champion, Challenger and Vulcan Carriers
This zinc-plated slide-in L-Arm fits the wheel lifts on various
models of Century, Holmes and Challenger wreckers and Century, Champion,
Challenger and Vulcan car carriers.
$209.99
Miller Wheel Lift L-Arms - Vulcan 10 Series Carriers and 800 Series LD Wheel Lifts
Note: Special Handling Fees Apply for Specific Items
This zinc-plated mild steel L-Arm from Miller Industries fits the Vulcan 10 Series car carriers and 800 Series light-duty wheel lifts with option of driver or passenger side fit. Sometimes called a tire restraint or wheel retainer, the 2 x 2.5 tube is designed to work with the driver side outer crosstube 8800900. This strapless system offers a Working Load Limit of 4,000 lbs. This scoop also features adjustment holes for proper tire fitment and a grated pan for improved grip.
This zinc-plated mild steel L-Arm from Miller Industries fits the Vulcan 10 Series car carriers and 800 Series light-duty wheel lifts with option of driver or passenger side fit. Sometimes called a tire restraint or wheel retainer, the 2 x 2.5 tube is designed to work with the driver side outer crosstube 8800900. This strapless system offers a Working Load Limit of 4,000 lbs. This scoop also features adjustment holes for proper tire fitment and a grated pan for improved grip.
- 2 x 2.5 aluminum tube
- Opton of driver or passenger positioning
- Adjustment holes
- Grated scoop tire pan
- Use with 8800900 outer crosstube
- WLL: 4,000 lbs.
Fits: - 2003-Current Vulcan 10 Series Steel & Aluminum Carriers
- 2001-Current Vulcan 10 Series Extreme Angle Steel Carriers
- 2010-Current Vulcan Modular 804 Wreckers
- 2010-Current Vulcan Modular 806 Wreckers
- 2008-Current Vulcan Modular 880/890 Wreckers
- 2002-Current Vulcan 805 Wreckers
- 2000-Current Vulcan 806 Wreckers
- 1999-Current Vulcan 880/890 Wreckers
$258.99
All-Grip Chevron Style T Handle Pin
This is a Chevron T-handle pin. Choose from three size options: 5/8" X 3" reach, 3/4" X 3-1/2" reach, & 3/4" X 6" reach
$35.99
–
$54.99
B/A Products T Handle Pin 5/8"
This 5/8" diameter Pin comes with a t-handle and release button. It's for
Chevron L-Arm and fits Chevron 408 and Car Carrier wheel grids.
$46.99
Miller Replacement L-Arm Pin Assembly
Replacement pivot lock pin with attachment cable for Century new style "Pivot-L" wheel grids. This part can be used to replace Part Numbers: 12-0714415 and 12-0904140.
$14.89
Miller Steel Wheel Lift L-Arm - Century, Holmes and Vulcan Wreckers
Note: Special Handling Fees Apply for Specific Items
This painted steel L-Arm from Miller Industries fits the wheel lifts on various models of Century, Holmes and Vulcan wreckers. Otherwise known as a tire restraint or wheel retainer, this L-Arm fits the crosstubes on the driver side. This part can be used to replace Driver Side Part Nos. 12-00803911 and 12-0803911 & Passenger Side Part Nos.12-00803912 and 12-0803912.
This painted steel L-Arm from Miller Industries fits the wheel lifts on various models of Century, Holmes and Vulcan wreckers. Otherwise known as a tire restraint or wheel retainer, this L-Arm fits the crosstubes on the driver side. This part can be used to replace Driver Side Part Nos. 12-00803911 and 12-0803911 & Passenger Side Part Nos.12-00803912 and 12-0803912.
- Option of driver or passenger position
- Painted steel
- Driver side (12-0806978) replaces driver side Part Nos. 12-00803911 and
12-0803911
Fits: - 2010 - Current Century Modular Midnight Express
- 2000 - Current Century Midnight Express
- 2007 - Current Century Express 300 Series Modular
- 2009 - Current Holmes 440SL
- 2007 - Current Vulcan Modular 807
- 2000 - Current Vulcan 810 Intruder
$635.99
Miller Rubber Stop Century 300 Series and Vulcan 807 / 810
This Rubber Stop from Miller Industries is used on the boom assembly of Vulcan
810 Intruders, Vulcan 807R and Century 301, 301M, 311 and 312 Wreckers.
$40.99
Miller Eagle Claw Spring Kit
Spring set for Eagle wheel lifts. This part is used to replace Part Number
AWS-1010-A.
$41.99
