Free shipping is only valid on total purchases of $199 or more and ground shipments within the contiguous 48 states for products weighing less than 150 lbs. Special handling fees may be required for some products.Shipping fees will be added for all orders under $199 or that include oversized items or any item of 150 lbs or more. Please contact customer service if you have any questions.
This Pivot Base Straight Control Handle from Miller Industries is used on the 6
and 9 Spool Control Station of Century Generation II 16 Series LCG Car
Carriers. Please see the brochure tab for a list of breakdowns.
3M Acrylic Foam Tape 4229P is a 0.76mm thick, medium-density, dark grey acrylic foam double sided adhesive tape with high performance acrylic adhesives. Double Sided Acrylic foam adhesive tape is grey with red polyethylene release liner. General purpose double sided adhesive tape with superior adhesive bonding strength for a wide variety of surfaces. Can be used to stick neodymium magnets to non-ferrous material surfaces like plastic, copper, stainless steel, wood, glass, tiles, concrete as these materials does not work directly with magnets. The acrylic foam of 0.76mm thick allows the adhesive to mould to slightly rough surfaces like concrete.
The pros know that you don't mess around when it comes to brakes. FVP Brake Cleaner meets or exceeds OE quality with a price so competitive it will stop you in your tracks. FVP Non-Chlorinated Brake Part Cleaner removes oil, grease, brake fluid and containments quickly, with no residue.
This waterproof Flood Light from Buyers Products has 6 white LEDs with a black
powder coated cast aluminum housing. This light is a 12-24 volt system with a
1.5 Amp draw that has an output of 1620 Lumens. Light comes with an adjustable
stainless steel stud mount. The dimensions for this flood light are 5.75" W x
2" T x 3" D and weights around 1.6 lbs.
Temflex vinyl insulating electrical tape. It is flame retardant, lead free,
cold and sunlight resistant, suitable for use at not more than 600V and not
more than 80?C (176?F).
Howes Lubricator heavy-duty, multi-purpose Lubricator and Penetrating Oil is guaranteed to loosen rusted nuts and bolts. The lubricant can be sprayed on wires, leads and distributor caps and is safe to use on almost any surface.
These Grade 70 Chain assemblies are 5/16" and include a 15" j-hook at one end
and a grab hook and hammerhead t-j combo hook on the other end. The forged, heat
treated steel has excellent wear and abrasion resistance.
Millennium marker lights are commonly called the Peterbilt
Style. These lights are commonly mounted on the Miller aluminum car carriers
with the removable side rail. These are also applied on wreckers as well.
Fastenal 11.1" 50 lbs. tensile UV black nylon 6.6 Power Phase cable tie.
Cable ties secure wire bundles, harnesses and components quickly without
slipping. Sold Each (Individually)
Phoenix electrical junction blocks are high-quality, easy-to-use terminal
blocks that allow you to connect multiple electrical sources in your car,
truck, trailer, or RV. They feature a two-piece design and are available with a
range of poles to accommodate a variety of wiring requirements. These blocks
ensure that your wires stay in place and don't contact other leads, keeping all
of your electrical devices organized and safe from short circuiting.
Our popular SL-9 magnetic tow light kit comes with two sealed beam truck lights
in a rubber housing, plastic-housed magnets, and 30' of 4 - wire cable all
pre-wired into the male plug. The kit also includes a plastic carrying case
and the female plug. The flexible cable is 16 gauge wire with "Yukon Weather
Proven" outer and inner jackets.
This Miller Industries product is the right hand side tail light housing for Century or Vulcan 10, 15, 20 or 30 Series Car Carriers 2005-Current. Its painted black steel shell houses all the right hand side tail light components, as well as the face plate. It bolts onto the mounting bracket (12-0710783) which is attached to the subframe of the carrier. See features for additional information. This part can be used to replace Part Number 12-0801574.
This is a stainless steel tail light face plate for the left hand side of the
Century Generation II LCG car carriers. The light configuration for this bezel
is horizontal. Does not include lights or back up alarm pictured in photo. All
that is included is the stainless steel face plate.
This Miller Industries product is the left hand side tail light housing for Century or Vulcan 10, 15, 20 or 30 Series Car Carriers 2005-Current. Its painted black steel shell houses all the left hand side tail light components, as well as the face plate. It bolts onto the mounting bracket (12-0710783) which is attached to the subframe of the carrier. See features for additional information. This part can be used to replace Part Number 12-0801573.
This Miller Industries product is the right hand side tail light housing for
Century or Vulcan LCG Series Car Carriers (Generation I or II). Its painted
black steel shell houses all the right hand side tail light components, as well
as the face plate. It bolts onto the mounting bracket (12-0710784) which is
attached to the subframe of the carrier. See features for additional
information.
This is a stainless steel tail light face plate for the right hand side of the
Century Generation II LCG car carriers. The light configuration for this bezel
is horizontal. Does not include lights or license plate mounting hardware as
pictured in photo. All that is included is the stainless steel face plate.
This Miller Industries tail light mounting bracket connects the left hand tail
like housing to the subframe of the car carrier. It is bolt-on and is painted
steel black. It will work for any Century or Vulcan car carrier. See Features
for additional information.
This Miller Industries tail light mounting bracket connects the right hand tail
like housing to the subframe of the car carrier. It is bolt-on and is painted
steel black. It will work for any Century or Vulcan car carrier. See Features
for additional information.
This is a stainless steel tail light mounting plate for car carriers. It is for the right hand side of the tail light assembly. The mounting holes are cut out vertically, to allow your tail lights to be mounted vertically. This part can be used to replace Part Number 12-0720031.
This 4" Round Back Up Alarm from Miller Industries can be installed in the rear
tail light panel of Century, Champion, and Vulcan Car Carriers. Please see the
brochure tab for a list of breakdowns.
This is a Hose Tray used on 21' bed car carriers by Miller Industries.
This hose tray is 9' long x 3.5" wide. The channel where the hose lays in is
2" wide. This hose tray will fit 21' beds from Century, Champion and Vulcan.
See Features Below to see which models it will fit. This part can be used to
replace Part Number 12-0720283. This part will be cut into three sections in
all cases for economical shipment.
Update the wiring for the exterior DOT lighting on your Century car carrier
with this new harness from Miller Industries. Wiring fits up to 21'6" decks.
Replaces 0302217.
This Miller Industries product is the left hand side tail light housing for
Century or Vulcan LCG Series Car Carriers (Generation I or II). Its painted
black steel shell houses all the left hand side tail light components, as well
as the face plate. It bolts onto the mounting bracket (12-0710783) which is
attached to the subframe of the carrier. See features for additional
information.
This Miller Industries product is the right hand side tail light housing for Century or Vulcan 10, 15, 20 or 30 Series Car Carriers 2005-Current. Its painted black steel shell houses all the right hand side tail light components, as well as the face plate. It bolts onto the mounting bracket (12-0710783) which is attached to the subframe of the carrier. See features for additional information. This part can be used to replace Part Number 12-0801574.
This is a stainless steel tail light face plate for the left hand side of the
Century Generation II LCG car carriers. The light configuration for this bezel
is horizontal. Does not include lights or back up alarm pictured in photo. All
that is included is the stainless steel face plate.
This Miller Industries product is the left hand side tail light housing for Century or Vulcan 10, 15, 20 or 30 Series Car Carriers 2005-Current. Its painted black steel shell houses all the left hand side tail light components, as well as the face plate. It bolts onto the mounting bracket (12-0710783) which is attached to the subframe of the carrier. See features for additional information. This part can be used to replace Part Number 12-0801573.
This Miller Industries product is the right hand side tail light housing for
Century or Vulcan LCG Series Car Carriers (Generation I or II). Its painted
black steel shell houses all the right hand side tail light components, as well
as the face plate. It bolts onto the mounting bracket (12-0710784) which is
attached to the subframe of the carrier. See features for additional
information.
This is a stainless steel tail light face plate for the right hand side of the
Century Generation II LCG car carriers. The light configuration for this bezel
is horizontal. Does not include lights or license plate mounting hardware as
pictured in photo. All that is included is the stainless steel face plate.
This Miller Industries tail light mounting bracket connects the left hand tail
like housing to the subframe of the car carrier. It is bolt-on and is painted
steel black. It will work for any Century or Vulcan car carrier. See Features
for additional information.
This Miller Industries tail light mounting bracket connects the right hand tail
like housing to the subframe of the car carrier. It is bolt-on and is painted
steel black. It will work for any Century or Vulcan car carrier. See Features
for additional information.
This is a stainless steel tail light mounting plate for car carriers. It is for the right hand side of the tail light assembly. The mounting holes are cut out vertically, to allow your tail lights to be mounted vertically. This part can be used to replace Part Number 12-0720031.
This 4" Round Back Up Alarm from Miller Industries can be installed in the rear
tail light panel of Century, Champion, and Vulcan Car Carriers. Please see the
brochure tab for a list of breakdowns.
This is a Hose Tray used on 21' bed car carriers by Miller Industries.
This hose tray is 9' long x 3.5" wide. The channel where the hose lays in is
2" wide. This hose tray will fit 21' beds from Century, Champion and Vulcan.
See Features Below to see which models it will fit. This part can be used to
replace Part Number 12-0720283. This part will be cut into three sections in
all cases for economical shipment.
Update the wiring for the exterior DOT lighting on your Century car carrier
with this new harness from Miller Industries. Wiring fits up to 21'6" decks.
Replaces 0302217.
This Miller Industries product is the left hand side tail light housing for
Century or Vulcan LCG Series Car Carriers (Generation I or II). Its painted
black steel shell houses all the left hand side tail light components, as well
as the face plate. It bolts onto the mounting bracket (12-0710783) which is
attached to the subframe of the carrier. See features for additional
information.